4 layers100 × 120 mm
Micromouse pcb
MukeshSethy/micromouse-runner
This is my repo for the first version of full size micromouse development.
184 parts
2 layers
Thermal Camera
Cameronrlewis/Thermal-Camera-ProjectRepository for a new PCB Project
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 56
- Nets
- 68
- Pads
- 239
- Tracks, vias
- 185, 15
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 28 Feb 2026
- Updated
- 6 Apr 2026
Overview
Thermal Camera is an open-source printed circuit board by Cameronrlewis, from the Cameronrlewis/Thermal-Camera-Project repository on GitHub. It is a 2-layer board with 56 parts on 68 nets, routed with 185 tracks and 15 vias.
It is built around the ESP32-S3-WROOM-1-N8R2, MP3302DJ-LF-Z and MLX90640ESF-BAA-000-TU, with the TPB4056A20-ES1R, USBLC6-2SC6 and TS-1088R-02526 among its other parts. Its parts include 22 capacitors, 16 resistors, 5 ICs, 4 connectors and 4 switches. It belongs with the ESP32 boards of this library.
Main components
9
ESP32-S3-WROOM-1-N8R2
SMD,25.5x18mm-40℃~+85℃ -98.2dBm 2.4GHz 20.5dBm 355mA 3V~3.6V 97mA Bluetooth5.0 ESP32-S3 Chip On-board PCB Antenna UART、SPI、I2C、I2S、USB SMD,25.5x18mm WiFi Modules ROHSEspressif SystemsWiFi Modules
MP3302DJ-LF-Z
TSOT-23-5-40℃~+125℃ 1 1.3MHz 180mA 2.5V~6V 36V Analog、PWM Boost Built-in DC-DC Short Circuit Protection、Over Voltage Protection、Over-Temperature Protection (OTP)、LED open-circuit protection、Built-in soft-start TSOT-23-5 LED Drivers ROHSMonolithic Power SystemsLED DriversMLX90640ESF-BAA-000-TU
TO-39-40℃~+85℃ 32Hx24V On-chip defect repair、On-chip temperature sensor TO-39 Temperature Sensors ROHSMelexisImage Sensors
TPB4056A20-ES1R
ESOP-8-40℃~+85℃ 1 1A 4.2V 4.55V~6.1V 80uA Charging IC Constant current charging、Constant voltage charging、Trickle charging、Automatic recharge、Charge termination、Programmable charging current、Soft-start、Under-voltage lockout、Short-Circuit Protection、Overvoltage Protection Lithium Battery Not supported ESOP-8 Battery Management ROHS3PEAKBattery Management
USBLC6-2SC6
SOT-23-60.35pF、0.8pF 100nA 150W@8/20us 15V 2 5V 6A@8/20us 6V ESD SOT-23-6 ESD and Surge Protection (TVS/ESD) ROHSUMWESD And Surge Protection (TVS/ESD)TS-1088R-02526
SMD,4x3mm100,000 cycles 12V 2.5mm 2.6N 2.93mm 3.9mm 50mA Black Round Button SMD(SMT) Tab SPST Surface Mount,Vertical Without Bracket SMD,4x3mm Tactile Switches ROHSXUNPUTactile Switches
B2B-PH-K-S
插件,P=2mmUncategorisedJST
LTST-C170KGKT
0805-55℃~+85℃ 130° 20mA 2V 35mcd 571nm 574nm 75mW Discrete Diode Water Clear Yellow Green 0805 LED Indication - Discrete ROHSLite-OnLED Indication - Discrete
PCM12SMTR
SMD-20℃~+85℃ 6V PC Pin Rectangular Columnar SPDT Surface Mount,Vertical SMD Slide Switches ROHSC&KSlide Switches
README
README.mdThermal-Camera-Project
Repository for a new PCB Project
Parts
56| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 0.1uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2, C8, C9, C10, C11, C14, C16, C19 |
| 5 | 10k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R6, R7, R15, R16, R17 |
| 5 | 10uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C3, C4, C5, C20 |
| 4 | 1uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C12, C13, C21, C22 |
| 3 | 4.7uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C15, C17, C18 |
| 3 | TS-1088R-02526 | Thermal Footprints:SW-SMD_4P-L5.1-W5.1-P3.70-LS6.5-TL_H1.5 | SW2, SW3, SW4 |
| 2 | 100k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R10, R11 |
| 2 | 22 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3, R4 |
| 2 | 22uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C6, C7 |
| 2 | 4.7k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R8, R9 |
| 2 | 5.1k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2 |
| 1 | 1.2k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R5 |
| 1 | 1040310811 | Thermal Footprints:104031-0811_MOL | J3 |
| 1 | 3.9uH | Thermal Footprints:IND_4030 | L1 |
| 1 | 3.9uH | Thermal Footprints:IND_LQH2MCN4R7M02L | L2 |
| 1 | 330 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R12 |
| 1 | 5 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R13 |
| 1 | 5051101592 | Thermal Footprints:CON_5051101592_MOL | J2 |
| 1 | AP63203WU-7 | Thermal Footprints:TSOT-26_L2.9-W1.6-P0.95-LS2.8-BL | U2 |
| 1 | B2B-PH-K-S | Thermal Footprints:CONN-TH_B2B-PH-K-S | J4 |
| 1 | D_Schottky | Thermal Footprints:SOD2512X115N | D1 |
| 1 | ESP32-S3-WROOM-1-N8R2 | Thermal Footprints:WIRELM-SMD_ESP32-S3-WROOM-1 | U4 |
| 1 | LTST-C170KGKT | Thermal Footprints:LED0603-RD | LED1 |
| 1 | MLX90640ESF-BAA-000-TU | Thermal Footprints:TO-39_4P-BD9.3_MLX90640ESF-BAA-000-TU_H5.7 | A1 |
| 1 | MP3302DJ-LF-Z | Thermal Footprints:SOT95P280X100-5N | U5 |
| 1 | PCM12SMTR | Thermal Footprints:SW-SMD_PCM12SMTR | SW1 |
| 1 | TPB4056A20-ES1R | Thermal Footprints:ESOP-8_L4.9-W3.9-P1.27-LS6.0-BL-EP | U1 |
| 1 | USBLC6-2SC6 | Thermal Footprints:SOT-23-6 | U3 |
| 1 | USB_C_Receptacle_USB2.0 | Connector_USB:USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J1 |
Similar boards
- 4 layers90 × 60 mm
- 4 layers268 × 152 mm
Drumboy Main
Randomwaves/Drumboy-Pro
📖 Developer Wiki — full hardware specs, schematics walkthrough, firmware architecture, DSP internals, and memory map.
346 parts10MIT - 4 layers234.1 × 105.6 mm
Gameconsole
Nikhil-Krishnamurthy/Retro-Gaming-Handheld
This project was creating a gaming handheld from scratch, including cadding the case and designing the pcb. This handheld will run retro games up to the SNES.
118 parts1 - 4 layers100 × 100 mm
- 2 layers5.6 × 65.1 mm
Ornament
pmnlla/ornament
weird ahh christmas ornament shaped pcb with neopixels, stm8, and battery charging support. todo add an ftdi ig?
39 partsAGPL-3.0 - 2 layers58.9 × 34.4 mm
CrowdAware Node v1.0
crowdaware-inno-wing-iot/crowdaware-node
Scalable, privacy-aware crowd flow monitoring
10 parts3GPL-3.0 - 2 layers72.4 × 42.4 mm
Work
Heartland-Data/esp32-mintia-sensor-kit
本リポジトリは、MINTIAケースにESP32と各種センサを組み込む試作用ファームウェアの参考実装です。
71 parts1Apache-2.0
Questions
What parts does the Thermal Camera use?
56 parts, built around the ESP32-S3-WROOM-1-N8R2, MP3302DJ-LF-Z, MLX90640ESF-BAA-000-TU and TPB4056A20-ES1R. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Thermal Camera KiCad files?
From the Cameronrlewis/Thermal-Camera-Project repository on GitHub, at the commit this page was made from: the board is Thermal_Camera/Thermal_Camera.kicad_pcb and its schematic Thermal_Camera/Thermal_Camera.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Thermal Camera design in my own project?
Its repository states no licence, so its author keeps all rights: ask Cameronrlewis before reusing the design.