2 layers167.6 × 81.3 mm
Project 1
Thornbots/Electrical
Here is where we store all relevant files for the Electrical team. In here you will store all of the KiCad files that you produce through out the year.
99 parts
6 layers152.4 × 121.9 mm
ROSE PILK v1
Thornbots/ElectricalHere is where we store all relevant files for the Electrical team. In here you will store all of the KiCad files that you produce through out the year.
- Size
- 152.4 × 121.9 mm
- Copper layers
- 6
- Thickness
- 1.6 mm
- Parts
- 132
- Nets
- 173
- Pads
- 646
- Tracks, vias
- 0, 0
- Routed
- Not yet
- KiCad
- KiCad 7 (file 20221018)
- Created
- 4 Sep 2023
- Updated
- 2 Nov 2026
Overview
ROSE PILK v1 is an open-source printed circuit board by Thornbots, from the Thornbots/Electrical repository on GitHub. It is a 6-layer board of 152.4 × 121.9 mm with 132 parts on 173 nets.
It is built around the RP2040, SN65HVD230DR and W25Q128JVSIQ, with the RT6150B-33GQW, CD4515BE and XT30UPB-M among its other parts. Its parts include 56 resistors, 21 capacitors, 19 connectors, 17 diodes and 11 ICs. It belongs with the RP2040 boards of this library.
Main components
8
RP2040
LQFN-56(7x7)12bit 133MHz 30 LQFN-56(7x7) Microcontrollers (MCU/MPU/SOC) ROHSRaspberry PiMicrocontrollers (MCU/MPU/SOC)
SN65HVD230DR
SOP-8CAN TransceiversTokmas
W25Q128JVSIQ
SOIC-8-208mil-40℃~+85℃ 100,000 cycles 120ms@(32KB) 128Mbit 133MHz 1uA 2.7V~3.6V 20 Years 3ms Power-on reset、Hardware write protection、Software write protection、Write enable latch、Absolute write protection SPI SOIC-8-208mil NOR FLASH ROHSWinbondNOR FLASH
RT6150B-33GQW
WDFN-10(2.5x2.5)-40℃~+125℃@(TJ) 1 1.8V~5.5V 3.3V 60uA 800kHz~1.2MHz 800mA Buck-Boost Buck-Boost Built-in Fixed Yes WDFN-10(2.5x2.5) DC-DC Converters ROHSRichtek TechDC-DC Converters
CD4515BE
PDIP-24-55℃~+125℃ 0.04uA 135ns@15V,50pF 3V~18V 6.8mA 6.8mA CD4000 Decoder Single Supply PDIP-24 Signal Switches, Multiplexers, DecodersTexas InstrumentsSignal Switches, Multiplexers, Decoders
XT30UPB-M
--、Aviation model plug 0.65mΩ 15A DC 500V Gold Plated Male PA Yellow - Power connector / plug connectorAMASSPlug
TL3301NF160QG
SMD-4P,6x6mm1.6N 12V 4.3mm 50mA 6mm 6mm Black Gull Wing Round Button SPST Surface Mount,Vertical Without Bracket SMD-4P,6x6mm Tactile Switches ROHSE-SwitchTactile Switches
PN2222A
TO-92-3-55℃~+150℃ 1 NPN 1A 300MHz 300mV 40V 625mW NPN TO-92-3 Bipolar (BJT) ROHSNTE ElectronicsBipolar (BJT)
README
README.mdElectrical Team Repo!
Here is where we store all relevant files for the Electrical team. In here you will store all of the KiCad files that you produce through out the year.
Parts
132| Qty | Value | Footprint | References |
|---|---|---|---|
| 15 | 1uF | Capacitor_THT:CP_Radial_D5.0mm_P2.00mm | C5, C6, C7, C8, C9, C10, C11, C12, C20, C21, C22, C26, C34, C35, C36 |
| 15 | LED | LED_THT:LED_D3.0mm | D1, D2, D3, D4, D5, D6, D7, D8, D9, D10, D11, D12, D13, D14, D15 |
| 15 | R_US | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R13, R14, R15, R16, R17, R18, R19, R20, R21, R22, R23, R24, R25, R26, R27 |
| 14 | 27 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R6, R7, R8, R9, R10, R11, R12, R36, R38, R39, R40, R41, R42, R43 |
| 8 | 0 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R46, R47, R48, R49, R50, R51, R52, R53 |
| 6 | 10K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R3, R4, R5, R34, R35, R44 |
| 6 | Conn_02x08_Counter_Clockwise | Connector_PinSocket_2.00mm:PinSocket_2x08_P2.00mm_Vertical | J12, J13, J14, J15, J18, J19 |
| 3 | Conn_01x01_Pin | Connector_PinSocket_1.27mm:PinSocket_1x01_P1.27mm_Vertical | J8, J9, J10 |
| 3 | Conn_01x03 | Connector_PinHeader_2.00mm:PinHeader_1x03_P2.00mm_Vertical | J2, J6, J7 |
| 2 | 120 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R32, R33 |
| 2 | 1K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R37, R45 |
| 2 | 1N5817 | Diode_THT:D_DO-41_SOD81_P10.16mm_Horizontal | D16, D17 |
| 2 | 200 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R2, R54 |
| 2 | 47uF | Capacitor_THT:C_Disc_D7.0mm_W2.5mm_P5.00mm | C1, C4 |
| 2 | 5.1K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R28, R29 |
| 2 | ASDMB-12MHz | Oscillator:Oscillator_SMD_Abracon_ASDMB-4Pin_2.5x2.0mm | U2, U8 |
| 2 | R | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R30, R31 |
| 2 | RP2040 | Package_DFN_QFN:QFN-56-1EP_7x7mm_P0.4mm_EP3.2x3.2mm | U3, U9 |
| 2 | SN65HVD230DR | SN65HVD230DR:SOIC127P599X175-8N | U5, U7 |
| 2 | SW_Push | PS1024ALRED:SW_PS1024ALRED | SW1, SW2 |
| 2 | TL3301NF160QG | TL3301NF160QG:SW_TL3301NF160QG | S1, S2 |
| 2 | W25Q128JVS | Package_SO:SOIC-8_5.23x5.23mm_P1.27mm | U1, U10 |
| 1 | .47uF | Capacitor_THT:C_Disc_D7.0mm_W2.5mm_P5.00mm | C2 |
| 1 | 100K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1 |
| 1 | 10uF | Capacitor_THT:CP_Radial_D5.0mm_P2.50mm | C1 |
| 1 | 10uF MUST BE TANTALUM | Capacitor_THT:CP_Radial_D5.0mm_P2.00mm | C4 |
| 1 | 121 Nominal | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R2 |
| 1 | 2.2uH | Capacitor_THT:CP_Radial_D5.0mm_P2.00mm | L1 |
| 1 | 22uF | Capacitor_THT:C_Disc_D7.0mm_W2.5mm_P5.00mm | C3 |
| 1 | 5k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1 |
| 1 | CD4515BE | CD4515BE:DIP254P1080X508-24 | U12 |
| 1 | Conn_01x02 | ul_SM02B-GHS-TB:CONN_SM02B-GHS-TB_JST | J3 |
| 1 | Conn_01x04 | SM04B_GHS_TB_LF__SN__:JST_SM04B-GHS-TB_LF__SN_- | J4 |
| 1 | Conn_01x04_Pin | Connector_PinHeader_2.00mm:PinHeader_1x04_P2.00mm_Horizontal | J16 |
| 1 | Conn_02x08_Odd_Even | Connector_PinSocket_2.00mm:PinSocket_2x08_P2.00mm_Vertical | J5 |
| 1 | Conn_02x09_Odd_Even | Connector_PinHeader_2.00mm:PinHeader_2x09_P2.00mm_Vertical | J17 |
| 1 | Conn_02x24_Odd_Even | Connector_PinHeader_2.00mm:PinHeader_2x24_P2.00mm_Vertical | J11 |
| 1 | LM2940CT-5.0_NOPB | LM2940CT-5.0:TO254P1054X470X1955-3 | Q1 |
| 1 | PN2222A | Package_TO_SOT_THT:TO-92_Inline | Q3 |
| 1 | RT6150B-33GQW | RT6150B:SON50P250X250X80-11N | U11 |
| 1 | SW_Push_DPDT | Button_Switch_THT:SW_CuK_JS202011CQN_DPDT_Straight | SW3 |
| 1 | USB_C_Receptacle | Connector_USB:USB_C_Receptacle_Molex_105450-0101 | J1 |
| 1 | XT30UPB-M | XT30UPB-M:XT30UPB-M | U4 |
More from Thornbots/Electrical
12- 4 layers75 × 100 mm
Control Board V3
Thornbots/Electrical
Here is where we store all relevant files for the Electrical team. In here you will store all of the KiCad files that you produce through out the year.
76 parts - 4 layers65 × 90 mm
ROSE PILK v1
Thornbots/Electrical
Here is where we store all relevant files for the Electrical team. In here you will store all of the KiCad files that you produce through out the year.
55 parts - 4 layers65 × 90 mm
ROSE PILK v1
Thornbots/Electrical
Here is where we store all relevant files for the Electrical team. In here you will store all of the KiCad files that you produce through out the year.
51 parts - 2 layers52.5 × 45 mm
Measurement Testing
Thornbots/Electrical
Here is where we store all relevant files for the Electrical team. In here you will store all of the KiCad files that you produce through out the year.
32 parts - 2 layers127 × 91.1 mm
Project-1
Thornbots/Electrical
Here is where we store all relevant files for the Electrical team. In here you will store all of the KiCad files that you produce through out the year.
24 parts - 2 layers45 × 55 mm
Cap Bank V3
Thornbots/Electrical
Here is where we store all relevant files for the Electrical team. In here you will store all of the KiCad files that you produce through out the year.
18 parts - 2 layers75 × 50 mm
Slipring Board
Thornbots/Electrical
Here is where we store all relevant files for the Electrical team. In here you will store all of the KiCad files that you produce through out the year.
16 parts - 2 layers101.6 × 76.2 mm
ArmorPanel
Thornbots/Electrical
Here is where we store all relevant files for the Electrical team. In here you will store all of the KiCad files that you produce through out the year.
15 parts - 2 layers58.4 × 45.7 mm
Prj1 9 10 23
Thornbots/Electrical
Here is where we store all relevant files for the Electrical team. In here you will store all of the KiCad files that you produce through out the year.
14 parts - 2 layers79.4 × 47.6 mm
Charger Thingy
Thornbots/Electrical
Here is where we store all relevant files for the Electrical team. In here you will store all of the KiCad files that you produce through out the year.
13 parts - 2 layers75 × 75 mm
Armor Panel
Thornbots/Electrical
Here is where we store all relevant files for the Electrical team. In here you will store all of the KiCad files that you produce through out the year.
12 parts
Similar boards
- 4 layers55 × 73.5 mm
- 4 layers100 × 100 mm
FarmMesh Node
chinawrj/FarmMesh-Node
Developing an integrated hardware and software solution for farm-wide Mesh networking: RP2350B/ESP32-C5 nodes, firmware, network protocols, and Wi-Fi/BLE sensor access.
164 parts - 4 layers60 × 56.1 mm
- 4 layers60 × 56.1 mm
AvionicsPower
esb8/AvionicsPower
PCB of a Power Management and supply board for an Avionics stack.
82 parts2 - 2 layers80 × 65 mm
PixAppleV1.0
mrkingseasheep/PixApple
PixApple is designed as a RP2040 breakout board. It features 8 general use GPIOs, 1 SPI interface, 1 I2C interface, 4 ADC channels, 4 PWM channels and a CAN bus.
85 parts1GPL-3.0 - 2 layers75 × 40 mm
PicoTop Board Rev2
7west/PicoTop
A very basic computer & OS based on the RP2350 microcontroller
86 parts66 - 2 layers76.2 × 122.2 mm
Calculator full schematic revB
SCREAM325/TI_INFINITY
contains PCB file for PCBway and GCODE files for speaker case.
116 parts - 4 layers
Questions
How big is the ROSE PILK v1 PCB?
It measures 152.4 × 121.9 mm and has 6 copper layers, 1.6 mm thick.
What parts does the ROSE PILK v1 use?
132 parts, built around the RP2040, SN65HVD230DR, W25Q128JVSIQ and RT6150B-33GQW. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the ROSE PILK v1 KiCad files?
From the Thornbots/Electrical repository on GitHub, at the commit this page was made from: the board is 2023-24/noname-board/ROSE-PILK_v1/ROSE-PILK_v1.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the ROSE PILK v1 design in my own project?
Its repository states no licence, so its author keeps all rights: ask Thornbots before reusing the design.