2 layers20.8 × 51.3 mm
Neutron c
TheZoq2/ergodoxer
An ergodox inspired split keyboard with more keys than a standard ergodox
32 parts
2 layers197.6 × 173.1 mm
Ergodoxer
TheZoq2/ergodoxerAn ergodox inspired split keyboard with more keys than a standard ergodox
- Size
- 197.6 × 173.1 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 167
- Nets
- 140
- Pads
- 1,074
- Tracks, vias
- 2,532, 84
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 25 Feb 2019
- Updated
- 6 Aug 2019
Overview
Ergodoxer is an open-source printed circuit board by TheZoq2, from the TheZoq2/ergodoxer repository on GitHub. It is a 2-layer board of 197.6 × 173.1 mm with 167 parts on 140 nets, routed with 2,532 tracks and 84 vias.
It is built around the WS2812B and WS2812. Its parts include 50 diodes, 49 switches, 1 IC and 1 connector. It belongs with the keyboards and input boards of this library.
Main components
2
WS2812B
5mm X 5mm Surface Mount RGB LED with Intelligent ControlWorldsemiUncategorised
WS2812
SMD5050-4P1.57mm 1000mcd 110mcd 120us 2kHz 3.7V~5.3V 300ns 320mcd 451nm 523nm 5mm 5mm 623nm 800Kbit/s Built-in power-on reset circuit、Built-in power-on reset circuit Top-mount SMD5050-4P RGB LEDs(Built-in IC) ROHSWorldsemiRGB LEDs(Built-In IC)
Parts
167| Qty | Value | Footprint | References |
|---|---|---|---|
| 49 | 1N4148 | Diodes_ThroughHole:D_DO-35_SOD27_P7.62mm_Horizontal | D1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +33 |
| 48 | WS2812B | switches:LED_WS2812B-inverted | LE23, LED1, LED2, LED10, LED11, LED12, LED13, LED14, LED15, LED16, LED17, LED18, LED19, LED20, LED21, LED22 +32 |
| 40 | SW_Push | switches:SW_Cherry_MX_1.00u_PCB_dual | SW2, SW10, SW11, SW12, SW14, SW15, SW16, SW17, SW18, SW20, SW21, SW22, SW23, SW24, SW26, SW27 +24 |
| 7 | SW_Push_mod | switches:SW_Cherry_MX_1.00u_PCB_dual | SW1, SW7, SW13, SW19, SW25, SW31, SW37 |
| 4 | SolderJumper_3_Open | Jumper:SolderJumper-3_P1.3mm_Open_Pad1.0x1.5mm | JP1, JP2, JP3, JP4 |
| 2 | SW_Push | switches:SW_Cherry_MX_2.00u_PCB_reversible | SW43, SW46 |
| 1 | USB_C_Receptacle_USB2.0 | Connectors_USB:USB_C_Receptacle_GCT_USB4085 | J1 |
| 1 | WS2812 | switches:LED_WS2812B-inverted | LED43 |
| 1 | neutron-c | neutron-c:neutron-c | U1 |
The 153 most common of 167 parts.
More from TheZoq2/ergodoxer
1Similar boards
- 2 layers230.5 × 82 mm
Vitamins included
Duckle29/Vitamins-included
This repo holds a variation of the lets split. This board requires no soldering
214 parts49BSD-3-Clause - 4 layers61 × 100 mm
BigCore
Dschadu/Geistwerk-BigCore
An ESP32-based open hardware control board designed for Bottango-powered animatronic and motion projects.
152 parts4CERN-OHL-W-2.0 - 2 layers26 × 79.5 mm
- 2 layers131.5 × 95 mm
Clarinoid devboard
thenfour/Clarinoid
an electronic wind instrument / clarinet / flute / not sure
121 parts4 - 2 layers308.8 × 130.3 mm
CyberKeeb2040
zli117/CyberKeeb2040
Hardware design for a mechanical keyboard based on RP2040 that also has a Pi Zero onboard.
182 parts98CC-BY-SA-4.0 - 2 layers99.1 × 99.1 mm
TangNanoDCJ11MEM
ryomuk/TangNanoDCJ11MEM
Memory system and UART implemented on Tang Nano 20K for DEC DCJ11 PDP-11 Processor
45 parts86MIT - 2 layers49.5 × 30 mm
- 4 layers50 × 50 mm
HSCanT
cherry-embedded/HSCanT-hardware
HSCanT is a USB to 4-channel CAN FD tool designed based on the HPM5321 chip.
130 parts52Apache-2.0
Questions
How big is the Ergodoxer PCB?
It measures 197.6 × 173.1 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Ergodoxer use?
167 parts, built around the WS2812B and WS2812. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Ergodoxer KiCad files?
From the TheZoq2/ergodoxer repository on GitHub, at the commit this page was made from: the board is ergodoxer.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Ergodoxer design in my own project?
Its repository states no licence, so its author keeps all rights: ask TheZoq2 before reusing the design.