
Lora framework
- Size
- 26 × 28 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 20
- Nets
- 37
- Pads
- 104
- Tracks, vias
- 218, 47
- Pours
- 5
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 3 Jan 2025
- Updated
- 1 Jan 2026
Overview
Lora framework is an open-source printed circuit board by TheSilentDefender, from the TheSilentDefender/lora_expansion_card repository on GitHub, published under the MIT licence. It is a 4-layer board of 26 × 28 mm with 20 parts on 37 nets, routed with 218 tracks and 47 vias.
It is built around the E22-400MM22S, TLV76733DRVR and XDBM-0339-1530. Its parts include 7 capacitors, 4 resistors, 3 ICs, 2 switches and 1 connector. It belongs with the radio and wireless boards and the STM32 boards of this library.
Main components
3E22-400MM22S
SMD,10x10mm-147dBm 1.8V~3.7V 100mA 22.3dBm 433MHz、470MHz 6.5mA 7km Continuous frequency coverage LoRa SPI Stamp Hole Antenna、IPEX interface SMD,10x10mm LoRa Modules ROHSChengdu Ebyte Elec TechLoRa ModulesTLV76733DRVR
WSON-6(2x2)-40℃~+125℃@(Tj) 1 1.4V@(1A) 16V 1A 3.3V 46dB@(1MHz) 50uA 60uVrms Fixed Over Current Protection、Over Temperature Protection、Soft Start Positive WSON-6(2x2) Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTexas InstrumentsVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsXDBM-0339-1530
SMD-40℃~+85℃ 1 10,000 cycles 15.5mm 24P 5A Male Surface Mount, Right Angle Type-C USB 3.1 SMD USB Connectors ROHSLian Xin TechnologyUSB Connectors
README
README.mdlora_expansion_card
Parts
20| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 0.1uF | Capacitor_SMD:C_0402_1005Metric | C1, C2 |
| 2 | 5.1k | Resistor_SMD:R_0402_1005Metric | R1, R4 |
| 2 | MountingHole | MountingHole:MountingHole_2.2mm_M2 | H1, H2 |
| 2 | SW_Push | Button_Switch_SMD:SW_Push_SPST_NO_Alps_SKRK | SW1, SW2 |
| 1 | 0.1nF | Capacitor_SMD:C_0402_1005Metric | C7 |
| 1 | 100k | Resistor_SMD:R_0402_1005Metric | R3 |
| 1 | 100nF | Capacitor_SMD:C_0402_1005Metric | C3 |
| 1 | 10k | Resistor_SMD:R_0402_1005Metric | R2 |
| 1 | 1uF | Capacitor_SMD:C_0402_1005Metric | C6 |
| 1 | 2.2uF | Capacitor_SMD:C_0402_1005Metric | C5 |
| 1 | 4.7uF | Capacitor_SMD:C_0402_1005Metric | C4 |
| 1 | Conn_Coaxial_Small | Connector_Coaxial:MMCX_Molex_73415-0961_Horizontal_1.6mm-PCB | J1 |
| 1 | E22-400MM22S | footprints:MOD20_E22-400MM22S_CGD-M | U1 |
| 1 | STM32F042F6Px | Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm | U2 |
| 1 | TLV76733DRVR | footprints:SON65P200X200X80-7N | U3 |
| 1 | XDBM-0339-1530 | footprints:USB-C-SMD_USB-3.1-C-TYPE | USB1 |
Similar boards
- 4 layers16 × 39 mm

- 4 layers40 × 75 mm

CUR flight computer 25-26
CU-Rocketry/flight_computer
Competition Flight Computer Module 25-26
169 parts1 - 4 layers18 × 26 mm

- 4 layers40 × 40 mm

- 6 layers31.2 × 33 mm

4in1-mini
OpenDrone-hw/OpenESC-20x20
Open-source 4-in-1 AM32 ESC for FPV drones. 20x20 mm, 2-6S, one MCU per motor, CERN-OHL-S-2.0.
191 parts279CERN-OHL-S-2.0 - 4 layers55 × 55 mm

- 4 layers50 × 42 mm

- 6 layers41.6 × 80.4 mm

4in1-panel
OpenDrone-hw/OpenESC-30x30
Open-source 4-in-1 AM32 ESC for FPV drones. 30.5x30.5 mm, 2-8S, one MCU per motor, CERN-OHL-S-2.0.
404 parts85CERN-OHL-S-2.0
Questions
How big is the Lora framework PCB?
It measures 26 × 28 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Lora framework use?
20 parts, built around the E22-400MM22S, TLV76733DRVR and XDBM-0339-1530. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Lora framework KiCad files?
From the TheSilentDefender/lora_expansion_card repository on GitHub, at the commit this page was made from: the board is Electrical/lora_framework.kicad_pcb and its schematic Electrical/lora_framework.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Lora framework design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).