4 layers99 × 53.3 mm
PSLab
fossasia/pslab-hardware
PSLab Hardware Design and Schematics https://pslab.io
199 parts1.7kApache-2.0
2 layers60 × 68 mm
Electrical speed regulator for sewing machine. Uses Hall probe instead of unreliable carbon discs.
- Size
- 60 × 68 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 30
- Nets
- 19
- Pads
- 81
- Tracks, vias
- 149, 0
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 26 Dec 2018
- Updated
- 11 Feb 2019
Overview
Regulator is an open-source printed circuit board by TheColonelYoung, from the TheColonelYoung/Sewing_machine_regulator repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 60 × 68 mm with 30 parts on 19 nets, routed with 149 tracks and 0 vias.
It is built around the TL082. Its parts include 8 resistors, 8 diodes, 3 capacitors, 1 IC and 1 connector. It belongs with the power boards of this library.
Main components
1README
README.mdElectrical regulator for sewing machine
Based on design from: Robov elektro
Parts
30| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | D | Diode_THT:D_DO-15_P12.70mm_Horizontal | D1, D2, D3, D4 |
| 2 | 6k8/2W | Resistor_THT:R_Axial_DIN0918_L18.0mm_D9.0mm_P22.86mm_Horizontal | R1, R2 |
| 1 | 100R/1W | Resistor_THT:R_Axial_DIN0614_L14.3mm_D5.7mm_P15.24mm_Horizontal | R7 |
| 1 | 100k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R9 |
| 1 | 100n | Capacitor_THT:C_Disc_D7.0mm_W2.5mm_P5.00mm | C1 |
| 1 | 100n/400V | Capacitor_THT:C_Rect_L18.0mm_W7.0mm_P15.00mm_FKS3_FKP3 | C3 |
| 1 | 15k | Potentiometer_THT:Potentiometer_Bourns_3339P_Vertical | RV2 |
| 1 | 18k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R5 |
| 1 | 220R | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R8 |
| 1 | 27k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R6 |
| 1 | 330k | Potentiometer_THT:Potentiometer_Bourns_3339P_Vertical | RV1 |
| 1 | 33n | Capacitor_THT:C_Disc_D7.0mm_W2.5mm_P5.00mm | C2 |
| 1 | 5V1 | Diode_THT:D_DO-41_SOD81_P7.62mm_Horizontal | D5 |
| 1 | 820R | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R4 |
| 1 | Conn_01x06 | TerminalBlock:TerminalBlock_bornier-6_P5.08mm | J1 |
| 1 | D | Diode_THT:D_DO-35_SOD27_P7.62mm_Horizontal | D6 |
| 1 | KT505 | Package_TO_SOT_THT:TO-39-3 | D8 |
| 1 | LED | LED_THT:LED_D5.0mm | D7 |
| 1 | LOGO | TCY_logo:TCY_LOGO_13x6mm | G*** |
| 1 | LOGO | TCY_logo:Jamala_LOGO_16x8mm | G*** |
| 1 | LOGO | TCY_logo:QR_sewing_machine_regulator | G*** |
| 1 | MAF100 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | HG1 |
| 1 | TL082 | Package_DIP:DIP-8_W7.62mm | U1 |
The 27 most common of 30 parts.
Similar boards
- 2 layers82.1 × 82.1 mm
Uncut Gem
QuantumVillage/UncutGem
A prototype Full Stack fully Open Source NV Center Diamond Magnetometer
207 parts210AGPL-3.0 - 2 layers96.8 × 97 mm
Psoc5power
profdc9/DRSSTC-PCB-Pack
A pack of PCBs for a dual resonant solid state tesla coil setup. Pretty much everything you need.
133 parts59 - 2 layers130.6 × 112 mm
- 2 layers48 × 36.5 mm
Osillyscope etchable
tvlad1234/osillyscope
Low cost, low part count CH32V003-based oscilloscope
31 parts30MIT - 2 layers60 × 50 mm
- 2 layers79 × 107 mm
Eurorack spinfx
grappendorf/eurorack-spinfx
Spin FV-1 based effects module for Eurorack systems
80 parts16 - 2 layers167.8 × 200.6 mm
Random Jazz Generator
telec16/modular-synth
Little side project, don't expect much updates.
132 parts16
Questions
How big is the Regulator PCB?
It measures 60 × 68 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Regulator use?
30 parts, built around the TL082. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Regulator KiCad files?
From the TheColonelYoung/Sewing_machine_regulator repository on GitHub, at the commit this page was made from: the board is pcb/regulator.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Regulator design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).