2 layers42 × 52 mm
HonkLock
TemuWolverine/HonkLock
Open-source automated blast gate system, running on ESP32-S3s, with machine detection
24 parts25MIT
2 layers40 × 57.5 mm
HonklockGateway
TemuWolverine/HonkLock25Open-source automated blast gate system, running on ESP32-S3s, with machine detection
- Size
- 40 × 57.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 26
- Nets
- 25
- Pads
- 97
- Tracks, vias
- 147, 17
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 1 Jul 2026
- Updated
- 19 Oct 2026
Overview
HonklockGateway is an open-source printed circuit board by TemuWolverine, from the TemuWolverine/HonkLock repository on GitHub, published under the MIT licence. It is a 2-layer board of 40 × 57.5 mm with 26 parts on 25 nets, routed with 147 tracks and 17 vias.
It is built around the AMS1117-3.3. Its parts include 9 capacitors, 4 resistors, 3 ICs and 2 switches. It belongs with the ESP32 boards of this library.
Main components
1Parts
26| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 100nF | Capacitor_SMD:C_0805_2012Metric | C1, C6, C7, C9 |
| 4 | 10uF | Capacitor_SMD:C_0805_2012Metric | C2, C4, C5, C8 |
| 2 | 10k | Resistor_SMD:R_0805_2012Metric | R6, R7 |
| 2 | 5.1k | Resistor_SMD:R_0805_2012Metric | R4, R5 |
| 2 | Kobee Studio | kobee-studio-6AD34A20 | kobee-studio-6AD34A20, kobee-studio-6AD34A41 |
| 1 | 1uF | Capacitor_SMD:C_0805_2012Metric | C3 |
| 1 | 2.4GHz | EasyEDA_Lib:BULETM-SMD_ESPRESSIF_ESP32-C3-WROOM-02-N4-4MB | U1 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U3 |
| 1 | Boot | Button_Switch_SMD:SW_SPST_TS-1088-xR020 | SW4 |
| 1 | Kobee Studio | kobee-studio-6A97AC2D | kobee-studio-6A97AC47 |
| 1 | Kobee Studio | kobee-studio-6A97ABF4 | kobee-studio-6ACAF5BA |
| 1 | Kobee Studio | kobee-studio-6A97AC75 | kobee-studio-6A97AC75 |
| 1 | Kobee Studio | kobee-studio-6A96C1A4 | kobee-studio-6AD34A97 |
| 1 | LOGO | LOGO | G*** |
| 1 | Reset | Button_Switch_SMD:SW_SPST_TS-1088-xR020 | SW3 |
| 1 | ~ | EasyEDA_Lib:USB-C-TH_UC23-0B16F00P11 | USB1 |
| 1 | ~ | EasyEDA_Lib:COMM-SMD_16P-P1.27_E07-433M20S | U2 |
More from TemuWolverine/HonkLock
2- 2 layers40 × 31 mm
HonkLockSensorBoard
TemuWolverine/HonkLock
Open-source automated blast gate system, running on ESP32-S3s, with machine detection
21 parts25MIT
Similar boards
- 2 layers290.1 × 130 mm
- 2 layers26.2 × 45.5 mm
PL18 multiprotocol
pascallanger/DIY-Multiprotocol-TX-Module
Multiprotocol TX Module (or MULTI-Module) is a 2.4GHz transmitter module which controls many different receivers and models.
24 parts1.9kGPL-3.0 - 4 layers99 × 53.3 mm
PSLab
fossasia/pslab-hardware
PSLab Hardware Design and Schematics https://pslab.io
199 parts1.7kApache-2.0 - 4 layers85 × 56 mm
- 4 layers100 × 54 mm
32Bit shift register
MaltWhiskey/Mega-Cube
16x16x16 PL9823 Cube with Teensy 4.0 and FlexIO driver
64 parts766 - 2 layers44.2 × 29.3 mm
- 2 layers78 × 60 mm
- 2 layers59.1 × 99.9 mm
Cheap FOCer 2 60mm
shamansystems/Cheap-FOCer-2
Low-Cost Motor Controller based on the VESC 6
193 parts407
Questions
How big is the HonklockGateway PCB?
It measures 40 × 57.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the HonklockGateway use?
26 parts, built around the AMS1117-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the HonklockGateway KiCad files?
From the TemuWolverine/HonkLock repository on GitHub, at the commit this page was made from: the board is PCB/Gateway/HonklockGateway.kicad_pcb and its schematic PCB/Gateway/HonklockGateway.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the HonklockGateway design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).