Skip to the content
2 layers128.9 × 116 mmEsp32-steering, the printed circuit board in 3D

Custom PCB, code and 3D printed files to have buttons on a sim racing steering wheel

Size
128.9 × 116 mm
Copper layers
2
Thickness
1.6 mm
Parts
26
Nets
49
Pads
138
Tracks, vias
244, 41
Pours
1
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
4 Feb 2026
Updated
5 Nov 2026

Overview

Esp32-steering is an open-source printed circuit board by TanmayChhatbar, from the TanmayChhatbar/esp32-steering_buttons repository on GitHub. It is a 2-layer board of 128.9 × 116 mm with 26 parts on 49 nets, routed with 244 tracks and 41 vias.

It is built around the WS2812B and TL1100F160Q. Its parts include 10 diodes, 10 switches, 1 IC and 1 connector. It belongs with the ESP32 boards of this library.

Main components

2

README

README.md

ESP32 Steering Buttons

Demo Video

What you will need

  • A steering wheel
  • A few buttons
  • A few encoders
  • ESP32-S3 Supermini
  • Simagic QR70 Quick-release (I use this for powering the ESP32 on the board)

Notes

This repository is more a demo than a guide for DIY wheel buttons for an ESP32.

It uses the lemmingdev/ESP32-BLE-Gamepad library to handle the joystick control component.

LED is WIP.

Parts

26
QtyValueFootprintReferences
10WS2812BLED_SMD:LED_WS2812B_PLCC4_5.0x5.0mm_P3.2mmD1, D2, D3, D4, D5, D6, D7, D8, D9, D10
6TL1100F160Qesp32-steering-lib:SW_TL1100F160QS1, S2, S3, S4, S5, S6
4SW_SPSTButton_Switch_SMD:SW_Push_SPST_NO_Alps_SKRKSD1, SD2, SD3, SD4
2RotaryEncoder_Switch_MPRotary_Encoder:RotaryEncoder_Alps_EC11E-Switch_Vertical_H20mm_MountingHolesSW1, SW2
2SW_SPSTesp32-steering-lib:SW_D2FC_OMRSW4, SW5
1Conn_01x02userFootprints:JST_XH_S2B-XH-A-1_1x02_P2.50mm_Horizontal-shortJ1
1~esp32-steering-lib:ESP32-S3 SuperminiU1

Similar boards

  • 2 layers120 × 90 mmGame, the printed circuit board in 3D

    Game

    cem-keske/reflex_game

    32 parts
  • 2 layers160 × 55 mmTbc ui, the printed circuit board in 3D

    Tbc ui

    philmcm/tbc_ui

    43 parts
  • 4 layers99 × 53.3 mmPSLab, the printed circuit board in 3D

    PSLab

    fossasia/pslab-hardware

    PSLab Hardware Design and Schematics https://pslab.io

    199 parts1.7kApache-2.0
  • 2 layers26 × 30 mmMicrocontroller, the printed circuit board in 3D

    Microcontroller

    FrameworkComputer/ExpansionCards

    Reference designs and documentation to create Expansion Cards for the Framework Laptop

    34 parts1.1kCC-BY-4.0
  • 4 layers82.6 × 82.5 mmJumperless2, the printed circuit board in 3D

    Jumperless2

    Architeuthis-Flux/Jumperless

    A jumperless breadboard

    208 parts914
  • 2 layers95.3 × 161.9 mmDfh badge, the printed circuit board in 3D

    Dfh badge

    tanaes/whopping_Voron_mods

    135 parts787GPL-3.0
  • 2 layers42.8 × 28.8 mmMM Skirt, the printed circuit board in 3D

    MM Skirt

    PrintersForAnts/Micron

    If you want to purchase full kits there are 3 available (Kits are slowly updating to R1 hardware just make sure to double check the included hardware in your kit and if you have any questions reach out in the discord)

    11 parts741GPL-3.0

Questions

How big is the Esp32-steering PCB?

It measures 128.9 × 116 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Esp32-steering use?

26 parts, built around the WS2812B and TL1100F160Q. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Esp32-steering KiCad files?

From the TanmayChhatbar/esp32-steering_buttons repository on GitHub, at the commit this page was made from: the board is KiCAD/esp32-steering.kicad_pcb and its schematic KiCAD/esp32-steering.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Esp32-steering design in my own project?

Its repository states no licence, so its author keeps all rights: ask TanmayChhatbar before reusing the design.