
SeguidordelineasV2.1
aguuzzo/GZX
Este proyecto implementa un robot seguidor de líneas basado en un Arduino Nano, 6 sensores CNY70, motores Pololu y un driver de motores.

El robot Sumo "Bati" está diseñado como un proyecto de robótica para poder competir en la LNR.
Placa Bati V3 is an open-source printed circuit board by TaielST, from the TaielST/Robot_Sumo_Bati repository on GitHub. It is a 2-layer board of 70 × 50 mm with 18 parts on 34 nets, routed with 89 tracks and 0 vias.
It is built around the CNY70. Its parts include 12 connectors, 1 IC and 1 switch. It belongs with the ESP32 boards of this library.
El robot Sumo "Bati" está diseñado como un proyecto de robótica para poder competir en la LNR.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | CNY70 | Connector_JST:JST_PH_B3B-PH-K_1x03_P2.00mm_Vertical | J10, J12 |
| 2 | DRIVER | EESTN5:pin_strip_4 | J3, J4 |
| 2 | Mounting_Hole | EESTN5:Tornillo_M3_8mm | H2, H4 |
| 2 | Ultrasonido | Connector_JST:JST_EH_B4B-EH-A_1x04_P2.50mm_Vertical | J8, J9 |
| 1 | BAT + | EESTN5:BORNERA2_AZUL | J1 |
| 1 | BAT - | EESTN5:BORNERA2_AZUL | J2 |
| 1 | Buzzer | Connector_JST:JST_PH_B2B-PH-K_1x02_P2.00mm_Vertical | J6 |
| 1 | ESP32_DevKit_V1_CH9102X | EESTN5:ESP32_DevKit_V1_CH9102X | U1 |
| 1 | Fuente step down | EESTN5:BORNERA3_AZUL | J7 |
| 1 | LOGO | EESTN5:batilogo | G*** |
| 1 | SSD1306-SSD1306-128x64_OLED | EESTN5:128x64OLED | Display1 |
| 1 | SW_SPDT | EESTN5:SW_SPDT_TH_Vertical | SW1 |
| 1 | Sharp | Connector_JST:JST_PH_B3B-PH-K_1x03_P2.00mm_Vertical | J5 |
| 1 | Switch est | EESTN5:Pin_Header_3 | J11 |

aguuzzo/GZX
Este proyecto implementa un robot seguidor de líneas basado en un Arduino Nano, 6 sensores CNY70, motores Pololu y un driver de motores.

Pierini-Franco/Repositor_Automatico
The React app provides a way to order multiple products in a single order. At the same time, employees can order a single product

Carlos-Santos-prog/rc-car-esp32
Vehículo RC de combate con seguidor de línea basado en ESP32. Diseño electrónico completo en KiCad 10.


dinge321/motor_pcb
This is a pcb for a 6V motor project using an unspecified microcontroler with the driver L293D

Falcon-Mauricio/Triatlon_B2023
Repositorio dedicado al desarrollo de un robot capas de realizar tres disciplinas: Velocista - Quita obstáculos - Radio Controlado


It measures 70 × 50 mm and has 2 copper layers, 1.6 mm thick.
18 parts, built around the CNY70. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the TaielST/Robot_Sumo_Bati repository on GitHub, at the commit this page was made from: the board is Hardware/placa_Bati_V3/placa_Bati_V3.kicad_pcb and its schematic Hardware/Bati_V4/Bati_V4.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask TaielST before reusing the design.