

- Size
- 100 × 100 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 148
- Nets
- 181
- Pads
- 577
- Tracks, vias
- 1,281, 342
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 16 Apr 2024
- Updated
- 16 Apr 2024
Overview
Wheel is an open-source printed circuit board by TEXNITIS, from the TEXNITIS/2024_pcb_wheel repository on GitHub. It is a 2-layer board of 100 × 100 mm with 148 parts on 181 nets, routed with 1,281 tracks and 342 vias.
It is built around the L7805, SN74HC14PWR-TP and RJ45. Its parts include 65 resistors, 20 capacitors, 12 transistors, 2 connectors and 2 switches.
Main components
3L7805
TO-220ST0℃~+125℃@(Tj) 1 1.2A 20V 2V@(1A) 42uV 500uA 5V 73dB@(120Hz) Fixed Positive Short Circuit Protection TO-220ST Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSOSENVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsSN74HC14PWR-TP
TSSOP-14-40℃~+125℃ 1.5V、1.9V、2.2V、2.4V、3.8V 100mV、300mV、400mV、450mV、550mV、550mV 10uA 2V~6V 3.5ns@5V,15pF 6 74HC Schmitt trigger TSSOP-14 Inverters ROHSTECH PUBLICInvertersRJ45
TH-12PTH-12P SMT ROHSJLCPCB AssemblyUncategorised
README
README.md2024_pcb_wheel
Parts
148| Qty | Value | Footprint | References |
|---|---|---|---|
| 46 | 10k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R2, R10, R11, R12, R14, R16, R18, R20, R22, R24, R25, R26, R27, R28, R29, R30 +30 |
| 17 | 0.1u | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C3, C4, C6, C7, C8, C10, C11, C12, C13, C14, C15, C16, C17, C18, C19, C20 +1 |
| 12 | 20k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R13, R15, R17, R19, R21, R23, R31, R61, R62, R63, R64, R65 |
| 12 | 2SC1945 | Package_TO_SOT_SMD:SC-59_Handsoldering | Q1, Q2, Q3, Q4, Q5, Q6, Q7, Q8, Q9, Q10, Q11, Q12 |
| 6 | ADuM1401xRW | Package_SO:SOIC-16W_7.5x10.3mm_P1.27mm | MD_Iso_0, MD_Iso_1, MD_Iso_2, MD_Iso_3, MD_Iso_4, MD_Iso_5 |
| 6 | Conn_01x04_Female | Connector_JST:JST_XH_S4B-XH-A_1x04_P2.50mm_Horizontal | MD_conn_0, MD_conn_1, MD_conn_2, MD_conn_3, MD_conn_4, MD_conn_5 |
| 6 | Conn_01x05_Female | Connector_JST:JST_XH_S5B-XH-A_1x05_P2.50mm_Horizontal | ENC_conn_0, ENC_conn_1, ENC_conn_2, ENC_conn_3, ENC_conn_4, ENC_conn_5 |
| 5 | 330 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R3, R5, R56, R57 |
| 5 | CQY99 | LED_SMD:LED_PLCC-2_3.4x3.0mm_AK | LED_Blue1, LED_Green1, LED_Red1, Load_Debug1, Power_Debug1 |
| 3 | 0.33u | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C2, C5 |
| 3 | L7805 | Package_TO_SOT_SMD:TO-252-3_TabPin2 | Load_5V1, Power_3V3, Power_5V1 |
| 3 | SN74HC14PWR | SN74HC14PWR:SOP65P640X120-14N | ST0, ST1, ST2 |
| 2 | 100 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R66, R67 |
| 2 | Conn_01x02_Female | Connector_AMASS:AMASS_XT60-F_1x02_P7.20mm_Vertical | Load1, Power1 |
| 1 | Conn_01x02_Male | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | SBDBT_Debug1 |
| 1 | Conn_01x03_Female | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J2 |
| 1 | Conn_01x04_Male | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | Diso_Debug1 |
| 1 | Conn_01x05_Female | Connector_PinSocket_2.54mm:PinSocket_1x05_P2.54mm_Vertical | J1 |
| 1 | D | Diode_SMD:D_1206_3216Metric_Pad1.42x1.75mm_HandSolder | D1 |
| 1 | LOGO | myfootprint:wheel_rogo_25 | G*** |
| 1 | LOGO | myfootprint:rogo3 | G*** |
| 1 | LOGO | myfootprint:simple_rogo_1 | G*** |
| 1 | LOGO | myfootprint:TEXNITIS_rogo_25 | G*** |
| 1 | MCP2561-E-P | Package_DIP:DIP-8_W7.62mm | CAN_Recieber1 |
| 1 | NUCLEO-F446RE-Nucleo | 475679941301370898_MODULE_NUCLEO-F446RE:MODULE_NUCLEO-F446RE | Nucleo-F446RE_1 |
| 1 | RJ45 | myfootprint:RJ45_43860-0004 | CAN_LAN1 |
| 1 | SBDBT5V-SBDBT5V-2020Main-Main_2021-rescue | 487701742415511602_SBDBT5V:SBDBT5V | SBDBT1 |
| 1 | SW_MEC_5G | Button_Switch_THT:SW_Tactile_SPST_Angled_PTS645Vx39-2LFS | SW2 |
| 1 | SW_Push_DPDT | Button_Switch_THT:SW_E-Switch_EG2219_DPDT_Angled | SW1 |
The 143 most common of 148 parts.
Similar boards
- 2 layers

- 2 layers

- 2 layers

- 4 layers221.5 × 130.8 mm

MEP MAXI-85V-1-REV-2-Interface Board
JGilcreast/MetalHead
An opensource firmware and software drop-in replacement for the 85V Automatic Stirrup Bender by CRS Specialties Inc. ...short story behind the name...
407 parts - 4 layers90 × 70 mm

InclinationMeter
soldernerd/InclinationMeter
A battery-powered, Bluetooth-enabled precision electronic level instrument for machine tool geometry inspection and granite surface plate qualification.
118 parts - 2 layers100 × 50 mm

- 2 layers44.9 × 95.6 mm

Bluetoothkiste
julianschick/bluetoothkiste
Bluetooth-Box für Segelflugzeuge zur Kommunikation mit LX und FLARM
62 parts5MIT - 2 layers

ATMEGA 32 1
ernest-czachorowski/Flood-Sensors-KiCad-Files
This repository contains KiCad files for my master's thesis IoT infrastructure, which includes water leak detection sensors.
74 partsMIT
Questions
How big is the Wheel PCB?
It measures 100 × 100 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Wheel use?
148 parts, built around the L7805, SN74HC14PWR-TP and RJ45. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Wheel KiCad files?
From the TEXNITIS/2024_pcb_wheel repository on GitHub, at the commit this page was made from: the board is Wheel/v2/wheel/wheel.kicad_pcb and its schematic Wheel/v1/wheel/wheel.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Wheel design in my own project?
Its repository states no licence, so its author keeps all rights: ask TEXNITIS before reusing the design.