Skip to the content
2 layers91.5 × 87 mmInn BEC panelized, the printed circuit board in 3D

Inn BEC panelized

T3nk4I/Minisumo28

Code and Files for all the minisumo and sumo related projects I make, this repository includes codes, schematics, drawings, 3D files and more to make your own minisumo robot

Size
91.5 × 87 mm
Copper layers
2
Thickness
1.6 mm
Parts
320
Nets
5
Pads
1,120
Tracks, vias
920, 40
Pours
40
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
15 Sep 2023
Updated
19 Jul 2026

Overview

Inn BEC panelized is an open-source printed circuit board by T3nk4I, from the T3nk4I/Minisumo repository on GitHub, published under the GPL-2.0 licence. It is a 2-layer board of 91.5 × 87 mm with 320 parts on 5 nets, routed with 920 tracks and 40 vias.

It is built around the XL1509-5.0. Its parts include 80 capacitors, 80 connectors, 40 ICs, 40 diodes and 40 inductors.

Main components

1

README

README.md

Minisumo

Code and Files for all the minisumo and sumo related projects I make, this repository includes codes, schematics, drawings, 3D files and more to make your own minisumo robot.
Important: These are mostly personal projects, there might be some errors that will be fixed and updated, but I'm not responsable for any damage or malfunction that is caused by using the codes, files, etc. provided in this repository. If you find any errors in my code, PCBs, or any improvements in the 3D designs feel free to comment so I can correct the design, you can also make a pull request

The projects marked in italic are projects that are still on progress

Why open source?

When I started there was little to no info on how to make this kind of competition robots, so I want to make newcomers an easy and accesible database. Also anyone interested in making changes or upgrades can do them depending on their design choice and taste.

Folders

PCB's

  • Main boards:
    • Tei: PCB for minisumo using arduino nano and TB6612FNG
    • Tenn: PCB for minisumo using arduino nano and DRV8871 drivers
    • Inn BEC: Battery Eliminator Circuit, (AKA buck converter) using XL1509 IC, supports up to 36V and has 5V output, also has a L7805 footprint in the back so it can be adaptable.
    • Ma: PCB using SMD atmega 328P and MSKSEMI RZ7899-MS drivers
    • Jyo: PCB for microsumo using Seeeduino Xiao and DRV7781 drivers
  • Sensors:
    • QTMicro: Microsized line sensor suitable for minisumo and microsumo robots

Code

  • Basic: basic minisumo code without line sensors and 2 opponent sensors
  • SumoESP: minisumo code for the Arduino Nano ESP model
  • Tamashi-I7ach1: main code used for minisumo robot I7ach1 which uses a ESP32-C3 as the main board
  • Tamashi-T4nook1: main code used for minisumo robot T4nook1 which uses a atmega328p as the main controller
  • Tamashi-K1tsun3: main code used for minisumo robot K1tsun3 which uses a atmega328p as the main controller

3D Data

  • Flag System: DAMASHI-FLAG-SYSTEM, used for minisumo robots, compatible with the "OH", "JIN" and "MA-JIN" motor brackets.
  • Motor brackets:
    • OH: motor bracket compatible for the minisumo robot chasis in this repository, it can hold 050 style motors
    • JIN: motor bracket compatible for the minisumo robot chasis in this repository, it can hold maxon motors
    • MA-JIN: same as JIN motor bracket, but it can host a qtr-micro line sensor in the back.
  • Robots
    • Gyu-Ma-Oh: The base and the chasis files for Gyu-Ma-Oh, 4 oponent sensors and 1 line sensor.
    • T4nook1: The base and the chasis files for T4nook1, 4 oponent sensors and 2 line sensors.
    • K1tsun3: The base and the chasis files for K1tsun3, 5 oponent sensors and 2 line sensors.

Software that I use

For the most part I try to make all the files as modifiable as possible, but in some cases like the PCB's it's not that possible, so here's a list of software that you can use for the different extensions and file types in this repo.

  • 3D data: I mainly use FUSION360 and FreeCAD but I upload the files in .IGES and .STL so you can use any 3D CAD software and slicer software out there to modify and/or print the parts.
  • PCB's: I upload the gerbers in zip format for easy fabrication, I also upload a separate gerber file and BOM for JLPCB fabrication. As for modifying the files I use Kicad which is a free and open source EDA.
  • Code: I use Visual Studio Code with the PlatformIO extension, but the framework I work on is the arduino framework, so you can use the ArduinoIDE if you want.

You can also visit my ORG. page, DENJU DIVISION where we upload the different files individually, we upload mainly the boards that we have already tested and functioned without problems.

Parts

320
QtyValueFootprintReferences
80Conn_01x02_PinConnector_Wire:SolderWire-0.1sqmm_1x02_P3.6mm_D0.4mm_OD1mmJ1, J1, J1, J1, J1, J1, J1, J1, J1, J1, J1, J1, J1, J1, J1, J1 +64
4022uFCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC1, C1, C1, C1, C1, C1, C1, C1, C1, C1, C1, C1, C1, C1, C1, C1 +24
4047uFCapacitor_SMD:C_1210_3225Metric_Pad1.33x2.70mm_HandSolderC2, C2, C2, C2, C2, C2, C2, C2, C2, C2, C2, C2, C2, C2, C2, C2 +24
4068uHInductor_SMD:L_Bourns-SRN4018L1, L1, L1, L1, L1, L1, L1, L1, L1, L1, L1, L1, L1, L1, L1, L1 +24
40D_SchottkyDiode_SMD:D_SMAD1, D1, D1, D1, D1, D1, D1, D1, D1, D1, D1, D1, D1, D1, D1, D1 +24
40LOGOLOGOG***, G***, G***, G***, G***, G***, G***, G***, G***, G***, G***, G***, G***, G***, G***, G*** +24
40XL1509-5.0Package_SO:SOIC-8_3.9x4.9mm_P1.27mmU1, U1, U1, U1, U1, U1, U1, U1, U1, U1, U1, U1, U1, U1, U1, U1 +24

More from T3nk4I/Minisumo

7
  • 2 layers50 × 91 mmMa panelized, the printed circuit board in 3D

    Ma panelized

    T3nk4I/Minisumo

    Code and Files for all the minisumo and sumo related projects I make, this repository includes codes, schematics, drawings, 3D files and more to make your own minisumo robot

    129 parts28GPL-2.0
  • 2 layers85.5 × 98.5 mmTei panelized, the printed circuit board in 3D

    Tei panelized

    T3nk4I/Minisumo

    Code and Files for all the minisumo and sumo related projects I make, this repository includes codes, schematics, drawings, 3D files and more to make your own minisumo robot

    111 parts28GPL-2.0
  • 2 layers85.5 × 32.5 mmTei, the printed circuit board in 3D

    Tei

    T3nk4I/Minisumo

    Code and Files for all the minisumo and sumo related projects I make, this repository includes codes, schematics, drawings, 3D files and more to make your own minisumo robot

    37 parts28GPL-2.0
  • 2 layers86 × 25 mmTenn, the printed circuit board in 3D

    Tenn

    T3nk4I/Minisumo

    Code and Files for all the minisumo and sumo related projects I make, this repository includes codes, schematics, drawings, 3D files and more to make your own minisumo robot

    34 parts28GPL-2.0
  • 2 layers12 × 15.8 mmShu BEC, the printed circuit board in 3D

    Shu BEC

    T3nk4I/Minisumo

    Code and Files for all the minisumo and sumo related projects I make, this repository includes codes, schematics, drawings, 3D files and more to make your own minisumo robot

    14 parts28GPL-2.0
  • 2 layers18 × 20 mmUART programmer, the printed circuit board in 3D

    UART programmer

    T3nk4I/Minisumo

    Code and Files for all the minisumo and sumo related projects I make, this repository includes codes, schematics, drawings, 3D files and more to make your own minisumo robot

    12 parts28GPL-2.0
  • 2 layers11 × 17 mmInn BEC, the printed circuit board in 3D

    Inn BEC

    T3nk4I/Minisumo

    Code and Files for all the minisumo and sumo related projects I make, this repository includes codes, schematics, drawings, 3D files and more to make your own minisumo robot

    8 parts28GPL-2.0

Similar boards

  • 4 layers50 × 50 mmESP32-Sentinel Kinetic Wireless Dongle, the printed circuit board in 3D

    ESP32-Sentinel Kinetic Wireless Dongle

    alextrical/ESP32-Sentinel-Kinetic-Wireless-Dongle

    ESP8266 based Re-implementation of the Vent-Axia Sentinel Kinetic Wired Remote Controller without a Display

    81 parts6CERN-OHL-S-2.0
  • 2 layers120.4 × 85.7 mmESPrinkler Retic PCB, the printed circuit board in 3D

    ESPrinkler Retic PCB

    slippery-carrot/ESPrinkler-Retic-Controller

    8-Zone reticulation controller based on ESPHome for Home Assistant

    142 parts6GPL-3.0
  • 2 layers127 × 71 mmRgb input, the printed circuit board in 3D

    Rgb input

    hoeken/yarrboard-hardware

    Hardware for the Yarrboard open hardware project

    118 parts4GPL-3.0
  • 2 layers50.7 × 16.8 mmDroneled, the printed circuit board in 3D

    Droneled

    AayanShaikh007/drone

    multipurpose drone that can carry various payloads

    10 parts2
  • 2 layers92.4 × 113.4 mmAutomation, the printed circuit board in 3D

    Automation

    CK20000/STM32-Digital-Twin-Project-Status-Architecture

    Tired of paywalled PCB simulators? Open-source, physics-accurate digital twin for KiCad. Real MCU (Renode), real analog (ngspice), live PyQt6 dashboard. No stubs, no fake numbers. Fork and grow it.

    143 parts2MIT
  • 2 layers138 × 162 mmRemora Nucleo F446ZE Hat, the printed circuit board in 3D

    Remora Nucleo F446ZE Hat

    ben-jacobson/RemoraNucleoHatPCB

    Cost-effective, customisable LinuxCNC motion control unit.

    179 parts1GPL-3.0
  • 2 layers40.1 × 45.9 mmTof mount, the printed circuit board in 3D

    Tof mount

    PawprintPrototyping/OpenSauce26

    Opem Sauce BOIII

    44 parts1GPL-2.0
  • 2 layers63.8 × 52.5 mmMotor Driver Board, the printed circuit board in 3D

    Motor Driver Board

    rdi-wang/Motor_Driver_Board

    PCB for A4988 Stepper Driver + Arduino Pico

    36 parts1

Questions

How big is the Inn BEC panelized PCB?

It measures 91.5 × 87 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Inn BEC panelized use?

320 parts, built around the XL1509-5.0. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Inn BEC panelized KiCad files?

From the T3nk4I/Minisumo repository on GitHub, at the commit this page was made from: the board is PCBS/Boards/Inn BEC/Production/Inn BEC_panelized.kicad_pcb and its schematic PCBS/Boards/Inn BEC/Inn BEC.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Inn BEC panelized design in my own project?

Its repository publishes it under the GPL-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).