

Fietscomputer mainboard ESP32
Eindproject van Sybe Van den Bergh
- Size
- 50 × 100 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 25
- Nets
- 43
- Pads
- 148
- Tracks, vias
- 174, 13
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 2 Sep 2025
- Updated
- 5 Nov 2025
Overview
Fietscomputer mainboard ESP32 is an open-source printed circuit board by Sybe3010, from the Sybe3010/BikeESP32--final-integrated-project- repository on GitHub, published under the MIT licence. It is a 4-layer board of 50 × 100 mm with 25 parts on 43 nets, routed with 174 tracks and 13 vias.
It is built around the ESP32-S3-WROOM-1-N8 and AMS1117-3.3. Its parts include 7 resistors, 7 switches, 6 capacitors, 2 ICs and 2 connectors. It belongs with the computers and single-board computers boards and the ESP32 boards of this library.
Main components
2ESP32-S3-WROOM-1-N8
SMD,25.5x18mm-40℃~+85℃ -98.2dBm 2.4GHz 20.5dBm 355mA 3V~3.6V 95mA Bluetooth5.0 ESP32-S3 Chip On-board PCB Antenna UART、SPI、I2C、I2S、USB SMD,25.5x18mm WiFi Modules ROHSEspressif SystemsWiFi ModulesAMS1117-3.3
SOT-223-40℃~+125℃ 0.003%Vout 1 1.1V@(800mA) 15V 1A 3.3V 5mA 72dB@(120Hz) Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
README
README.mdBIKE-ESP32
BikeEsp32 is a final project made by Sybe Van den Bergh. I am a 16 year old student Informatica and Datacommunication Science. Since this project has just started I will not accept any pull requests, I can accept this kind of requests as of July 2026 when I graduate.
The Project
This project features a ESP32-S3 devkit equiped with 16MB ROM and 8MB PSRAM, to connect al sensor and actuators there is a PCB. The board is programmed using VSCode on PlatformIO. The chosen platform is Arduino meanly because that is what we use at school, but also because of the great support. In the future I would like to expand the project and make a custom PCB.
The Progress
- Searching information
- Testing Maps
- Making home/settings screens
- Making activities
- Reading BLE sensors
- Documenting
Parts
25| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 10K | Resistor_SMD:R_0805_2012Metric | R1, R2, R4, R5, R6, R7, R8 |
| 3 | 0.1uF | Capacitor_SMD:C_0805_2012Metric | C3, C4, C5 |
| 3 | 10uF | Capacitor_SMD:C_0805_2012Metric | C1, C2, C6 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U2 |
| 1 | BOOT1 | Button_Switch_THT:SW_PUSH_6mm | SW2 |
| 1 | Conn_01x04_Pin | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J2 |
| 1 | ESP32-S3-WROOM-1 | RF_Module:ESP32-S3-WROOM-1 | U1 |
| 1 | LAP_BUTTON | CUSTOM FOODPRINTS:KNOP ANGLED | SW5 |
| 1 | MAIN_BUTTON | Button_Switch_THT:SW_PUSH_6mm | SW6 |
| 1 | PAGE_BUTTON | Button_Switch_THT:SW_PUSH_6mm | SW4 |
| 1 | POWER_LED | LED_SMD:LED_0603_1608Metric | D1 |
| 1 | RESET1 | Button_Switch_THT:SW_PUSH_6mm | SW1 |
| 1 | USB_C_Receptacle_USB2.0_14P | Connector_USB:USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J1 |
| 1 | ZOOM+_BUTTON | CUSTOM FOODPRINTS:KNOP ANGLED | SW8 |
| 1 | ZOOM-_BUTTON | CUSTOM FOODPRINTS:KNOP ANGLED | SW7 |
Similar boards
- 2 layers86 × 54 mm

- 2 layers55 × 100 mm

- 2 layers110 × 100 mm

PidginTranslator
DevMubarak1/PidginTranslator
Handheld translator for Nigerian languages. No internet needed for common phrases, YarnGPT for everything else.
14 parts21MIT - 4 layers58.5 × 85.5 mm

- 2 layers50.6 × 71.1 mm

Open ESPilot
Tomas-Kuchta-FPV/Open-ESPilot
An open-source project to develop a custom ESP32-based flight controller designed primarily for use with ArduPilot. Focused on affordability, flexibility, and ease of integration with various robotic and UAV platforms.
109 parts18CERN-OHL-W-2.0 - 4 layers102 × 100 mm

Zelvicka
RoboticsBrno/Robutek
Robůtek je robotická platforma založená na čipu ESP32-S3. Je velice rozšitiřelný, ale ze základu umí jezdit, kreslit fixou, jezdit po čáře, pohybovat se bludištěm. Programování je přes Jaculus.
214 parts12 - 2 layers156 × 66 mm

Dash 6.8
romioRN/Dash6.8-hardware
wifi name "service", password 12345678, connect to 192.167.4.1
152 parts11Apache-2.0 - 4 layers100 × 100 mm

Questions
How big is the Fietscomputer mainboard ESP32 PCB?
It measures 50 × 100 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Fietscomputer mainboard ESP32 use?
25 parts, built around the ESP32-S3-WROOM-1-N8 and AMS1117-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Fietscomputer mainboard ESP32 KiCad files?
From the Sybe3010/BikeESP32--final-integrated-project- repository on GitHub, at the commit this page was made from: the board is PCB/fietscomputer_mainboard_ESP32/fietscomputer_mainboard_ESP32.kicad_pcb and its schematic PCB/fietscomputer_mainboard_ESP32/fietscomputer_mainboard_ESP32-2.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Fietscomputer mainboard ESP32 design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).