Skip to the content
2 layers10 × 100 mmFinal kicad, the printed circuit board in 3D
Size
10 × 100 mm
Copper layers
2
Thickness
1.6 mm
Parts
25
Nets
32
Pads
67
Tracks, vias
134, 15
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
22 Jan 2025
Updated
13 Mar 2025

Overview

Final kicad is an open-source printed circuit board by SyHilichurl, from the SyHilichurl/514_final repository on GitHub. It is a 2-layer board of 10 × 100 mm with 25 parts on 32 nets, routed with 134 tracks and 15 vias.

It is built around the MPU-6050. Its parts include 8 connectors, 5 resistors, 4 capacitors, 2 switches and 1 IC.

Main components

1

README

README.md

Parts

25
QtyValueFootprintReferences
20.1UCapacitor_SMD:C_0603_1608MetricC1, C2
210kResistor_SMD:R_0603_1608MetricR3, R4
24.7KResistor_SMD:R_0603_1608MetricR1, R2
110KConnector_PinHeader_1.00mm:PinHeader_1x02_P1.00mm_VerticalFSR1
110uFCapacitor_SMD:C_0603_1608MetricC4
1200Resistor_SMD:R_0603_1608MetricR5
12200PFCapacitor_SMD:C_0603_1608MetricC3
1Battery_CellConnector_JST:JST_PH_B2B-PH-K_1x02_P2.00mm_VerticalBT1
1LEDLED_THT:LED_D3.0mmD1
1MPU-6050Sensor_Motion:InvenSense_QFN-24_4x4mm_P0.5mmU1
1Motor_DCConnector_PinHeader_1.00mm:PinHeader_1x02_P1.00mm_VerticalM1
1NPNCrystal:Resonator-3Pin_W6.0mm_H3.0mmQ1
1PIN1Connector_PinHeader_1.00mm:PinHeader_1x01_P1.00mm_VerticalJ3
1PIN2Connector_PinHeader_1.00mm:PinHeader_1x01_P1.00mm_VerticalJ4
1PIN3Connector_PinHeader_1.00mm:PinHeader_1x01_P1.00mm_VerticalJ5
1PIN4Connector_PinHeader_1.00mm:PinHeader_1x01_P1.00mm_VerticalJ6
1SCLConnector_PinHeader_1.00mm:PinHeader_1x01_P1.00mm_VerticalJ2
1SDAConnector_PinHeader_1.00mm:PinHeader_1x01_P1.00mm_VerticalJ1
1SW_PushButton_Switch_THT:SW_PUSH_6mmSW1
1SW_SPSTButton_Switch_THT:SW_DIP_SPSTx01_Slide_6.7x4.1mm_W7.62mm_P2.54mm_LowProfileSW2
1negConnector_PinHeader_1.00mm:PinHeader_1x01_P1.00mm_VerticalJ7
1posConnector_PinHeader_1.00mm:PinHeader_1x01_P1.00mm_VerticalJ8

Similar boards

  • 2 layers23 × 120 mmFeather multi oled, the printed circuit board in 3D

    Feather multi oled

    idlehandsdev/volumetric_display

    TENEX OLED Displays

    72 parts312CC-BY-SA-4.0
  • 4 layers95 × 50 mmControl board, the printed circuit board in 3D

    Control board

    ZhuYanzhen1/MM32_CLion

    本项目是全国大学生智能车竞赛GDUT 2022年极速越野组的项目文件。采用了LQR控制器和多速率卡尔曼融合算法,并在单片机上实现。This project is the project document for the GDUT 2022 Extreme Off-Road Category of the National Student Intelligent Vehicle Competition.

    129 parts58AGPL-3.0
  • 2 layers50 × 66 mmBluePhil, the printed circuit board in 3D

    BluePhil

    pms67/BluePhil

    STM32-based development board with various sensors.

    106 parts53MIT
  • 2 layers36 × 43 mmAsac fc rev a, the printed circuit board in 3D

    Asac fc rev a

    victorhook/asac-fc

    asac fc is an rp2040 based flight controller made for FPV drone flying

    119 parts52GPL-3.0
  • 4 layers305 × 208.3 mmControlBoard, the printed circuit board in 3D

    ControlBoard

    paradise-fi/RoFI

    Distributed Metamorphic Robots

    224 parts42
  • 2 layers98.5 × 17.8 mmWeeSpindel, the printed circuit board in 3D

    WeeSpindel

    c-/weeSpindel

    Smaller, simpler version of the iSpindel. NOTE: Work-in-progress

    22 parts17
  • 2 layers36.2 × 36.2 mmDrone PCB, the printed circuit board in 3D

    Drone PCB

    PlumPot55/PCB_Designs

    Source Files of our PCB we did as a community

    50 parts15
  • 2 layers26 × 21.3 mmPModBoard, the printed circuit board in 3D

    PModBoard

    pms67/PModlet

    PMOD PCB with USB-to-UART converter and IMU (MPU-6050, I2C) for FPGAs.

    19 parts15MIT

Questions

How big is the Final kicad PCB?

It measures 10 × 100 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Final kicad use?

25 parts, built around the MPU-6050. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Final kicad KiCad files?

From the SyHilichurl/514_final repository on GitHub, at the commit this page was made from: the board is final_kicad/final.kicad_pcb and its schematic final_kicad/final.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Final kicad design in my own project?

Its repository states no licence, so its author keeps all rights: ask SyHilichurl before reusing the design.