Skip to the content
4 layers67.9 × 23.9 mmARC Reactor PCB, the printed circuit board in 3D

Wi-Fi controllable arc reactor board featuring an ESP32-C3-MINI-1, native USB flashing, a dual-diode power OR-ing circuit, and a 9-LED WS2812B addressable ring. Powered by a 2S–4S battery or USB-C.

Size
67.9 × 23.9 mm
Copper layers
4
Thickness
1.61 mm
Parts
43
Nets
56
Pads
194
Tracks, vias
188, 319
Pours
7
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
17 Oct 2026
Updated
31 Oct 2026

Overview

ARC Reactor PCB is an open-source printed circuit board by SuperMK15, from the SuperMK15/ARC_Reactor_PCB repository on GitHub. It is a 4-layer board of 67.9 × 23.9 mm with 43 parts on 56 nets, routed with 188 tracks and 319 vias.

It is built around the ESP32-C3-MINI-1, SN74AHCT1G125DBV and AP63205WU, with the AP2112K-3.3, WS2812B and SMAJ18A among its other parts. Its parts include 11 diodes, 10 capacitors, 8 resistors, 5 ICs and 4 connectors. It belongs with the power and radio and wireless boards and the ESP32 and RISC-V boards of this library.

Main components

7

README

README.md

Arc Reactor PCB

Wi-Fi controllable arc reactor board featuring an ESP32-C3-MINI-1, native USB flashing, a dual-diode power OR-ing circuit, and a 9-LED WS2812B addressable ring. Powered by a 2S–4S battery or USB-C.

Arc Reactor PCB

Features

  • ESP32-C3-MINI-1 module with onboard Wi-Fi
  • 9x WS2812B-B/W addressable RGB LEDs in a center-and-ring layout
  • Native USB-C interface for data flashing and 5V power input
  • Dual-diode power OR-ing circuit (LM66200) for seamless switching between USB and battery power
  • Wide-input synchronous step-down buck converter (AP63205) supporting 2S–4S LiPo inputs
  • Low-dropout regulator (AP2112K-3.3) for stable 3.3V MCU power
  • SN74AHCT1G125 level shifter for reliable 3.3V to 5V WS2812B data transmission
  • TVS diode (SMAJ18A) and breakout header for UART serial debugging

PCB Layers

Front Copper

Front Copper

Internal Ground (In1)

Ground

Internal Power (In2)

Power

Back Copper

Back Copper

Design Files

Designed in KiCad 10. Includes the complete schematic, 4-layer PCB layout, Bill of Materials (BOM), Component Placement List (CPL), and fabrication files.

Parts

43
QtyValueFootprintReferences
9WS2812BLED_SMD:LED_WS2812B_PLCC4_5.0x5.0mm_P3.2mmD3, D4, D5, D6, D7, D8, D9, D10, D11
510kResistor_SMD:R_0603_1608MetricR1, R4, R5, R6, R8
3100nFCapacitor_SMD:C_0603_1608MetricC2, C4, C8
31uFCapacitor_SMD:C_0603_1608MetricC3, C9, C10
222uFCapacitor_SMD:C_0805_2012MetricC5, C6
25.1kResistor_SMD:R_0603_1608MetricR2, R3
2Conn_01x01Connector_Wire:SolderWire-0.5sqmm_1x01_D0.9mm_OD2.3mmJ1, J2
2LOGOLOGOG1, G2
2SW_PushButton_Switch_SMD:SW_SPST_TS-1088-xR020SW1, SW2
110uFCapacitor_SMD:C_0805_2012MetricC7
110uFCapacitor_SMD:C_0603_1608MetricC1
1330Resistor_SMD:R_0603_1608MetricR7
14.7uHFNR4030S4R7MT:IND-SMD_L4.0-W4.0_FNR40XXSL1
1AP2112K-3.3Package_TO_SOT_SMD:SOT-23-5U5
1AP63205WUPackage_TO_SOT_SMD:TSOT-23-6U2
1Conn_01x03Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_VerticalJ4
1ESP32-C3-MINI-1PCM_Espressif:ESP32-C3-MINI-1U1
1LM66200DRLRLM66200DRLR:SOT-583-8_L2.1-W1.2-P0.50-LS1.6-BLU4
1SMAJ18ADiode_SMD:D_SMAD1
1SMAJ5.0ADiode_SMD:D_SMAD2
1SN74AHCT1G125SN74AHCT1G125:SOT-23-5_L3.0-W1.7-P0.95-LS2.8-BRU3
1USB_C_ReceptacleConnector_USB:USB_C_Receptacle_HRO_TYPE-C-31-M-12J3

Similar boards

  • 2 layers40 × 40 mmVibe lamp core v1, the printed circuit board in 3D

    Vibe lamp core v1

    laofahai/vibe-lamp

    Physical ESP32 status lamp for AI coding agents, with built-in Claude Code/Codex hooks and a generic event API.

    26 partsMIT
  • 2 layers82.4 × 46 mmThpdl 2511, the printed circuit board in 3D

    Thpdl 2511

    sthivaios/thpdl_2511

    THDPL-2511 Firmware and PCB Repo

    37 parts
  • 2 layers49.3 × 45.4 mmKbxIrBlaster, the printed circuit board in 3D

    KbxIrBlaster

    kbx81/kbxIRBlaster

    ESP32-based IR MegaBlaster!

    81 parts58CC-BY-SA-4.0
  • 4 layers22.9 × 22.9 mmTornado, the printed circuit board in 3D

    Tornado

    2crabs/Tornado-Board

    45 parts1CERN-OHL-S-2.0
  • 4 layers72.5 × 85.4 mmSbcb, the printed circuit board in 3D

    Sbcb

    jaguilar/sbcb

    112 parts
  • 2 layers100 × 100 mmIO 16 8 1, the printed circuit board in 3D

    IO 16 8 1

    PPUC/Hardware_IO_16_8_1

    Hardware for the generic I/O Board for PPUC

    227 parts5
  • 4 layers25 × 25 mmOpenPrint, the printed circuit board in 3D

    OpenPrint

    dac63701/OpenPrint

    52 parts
  • 2 layers95 × 140 mmRadio Kiosk v2c, the printed circuit board in 3D

    Radio Kiosk v2c

    Filip-Kin/frc-radio-kiosk

    Bench box that powers and configures FRC radios: dual-mode PoE (802.3at via LTC4279, passive 12 V via TPS26600), USB-C PD or DC in, 15.6 V out for the Toughbook, 4x CR123A backup, STM32F072 firmware.

    239 parts

Questions

How big is the ARC Reactor PCB PCB?

It measures 67.9 × 23.9 mm and has 4 copper layers, 1.61 mm thick.

What parts does the ARC Reactor PCB use?

43 parts, built around the ESP32-C3-MINI-1, SN74AHCT1G125DBV, AP63205WU and AP2112K-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the ARC Reactor PCB KiCad files?

From the SuperMK15/ARC_Reactor_PCB repository on GitHub, at the commit this page was made from: the board is Arc_Reactor_PCB.kicad_pcb and its schematic Arc_Reactor_PCB.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the ARC Reactor PCB design in my own project?

Its repository states no licence, so its author keeps all rights: ask SuperMK15 before reusing the design.