Skip to the content
2 layers97 × 75.5 mmArduino Uno R3, the printed circuit board in 3D

Portfolio, learning and practice attempts using KiCAD.

Size
97 × 75.5 mm
Copper layers
2
Thickness
1.6 mm
Parts
56
Nets
75
Pads
250
Tracks, vias
665, 83
Pours
1
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
28 Mar 2026
Updated
10 May 2026

Overview

Arduino Uno R3 is an open-source printed circuit board by SuganyaBaskaran, from the SuganyaBaskaran/kicad-projects repository on GitHub. It is a 2-layer board of 97 × 75.5 mm with 56 parts on 75 nets, routed with 665 tracks and 83 vias.

It is built around the ATMEGA16U2-MU, ATMEGA328P-PU and LMV358, with the LP2985-33DBV, CD1206-S01575 and CG0603MLC-05E among its other parts. Its parts include 10 capacitors, 4 ICs, 4 inductors, 4 crystals and 3 diodes. It belongs with the AVR (ATmega, ATtiny) boards of this library.

Main components

8

README

README.md

kicad-projects

Portfolio, learning and practice attempts using KiCAD.

Parts

56
QtyValueFootprintReferences
6100nCapacitor_SMD:C_0603_1608MetricC1, C2, C4, C5, C6, C7
3FiducialFiducial:Fiducial_1mm_Mask3mmFID1, FID2, FID3
3YELLOWLED_SMD:LED_0805_2012MetricL2, Rx1, Tx1
21KResistor_SMD:R_Array_Concave_4x0603RN2, RN4
21MResistor_SMD:R_0603_1608MetricR1, R2
21uCapacitor_SMD:C_0603_1608MetricC3, C8
222pCapacitor_SMD:C_0603_1608MetricC9, C11
247uCapacitor_SMD:CP_Elec_6.3x4.9PC1, PC2
2CD1206-S01575Diode_SMD:D_1206_3216MetricD2, D3
2Conn_01x08Connector_PinSocket_2.54mm:PinSocket_1x08_P2.54mm_VerticalIOL1, POWER1
2Conn_02x03_Odd_EvenConnector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_VerticalJ2, J6
110KResistor_SMD:R_Array_Concave_4x0603RN1
116MHZCrystal:Crystal_HC49-U_VerticalY1
122RResistor_SMD:R_Array_Concave_4x0603RN3
16x1F-H8.5Connector_PinSocket_2.54mm:PinSocket_1x06_P2.54mm_VerticalAD1
1ATmega16U2-MPackage_DFN_QFN:QFN-32-1EP_5x5mm_P0.5mm_EP3.6x3.6mmU3
1ATmega328P-PPackage_DIP:DIP-28_W7.62mmZU4
1BLM21Inductor_SMD:L_0805_2012MetricL1
1CG0603MLC- 05ECG0603MLC_05E:VARC1608X56NZ1
1CG0603MLC-05ECG0603MLC_05E:VARC1608X56NZ2
1CSTCE16M0V53-R0Crystal:Resonator_SMD_Murata_CSTxExxV-3Pin_3.0x1.1mmY2
1Conn_01x10Connector_PinSocket_2.54mm:PinSocket_1x10_P2.54mm_VerticalIOH1
1Conn_02x02_Odd_EvenConnector_PinHeader_2.54mm:PinHeader_2x02_P2.54mm_VerticalJ3
1FDN340PPackage_TO_SOT_SMD:SOT-23Q1
1GROUNDJumper:SolderJumper-2_P1.3mm_Open_Pad1.0x1.5mmJP1
1LMV358Package_SO:TSSOP-8_4.4x3mm_P0.65mmU5
1LP2985-3.3Package_TO_SOT_SMD:SOT-23-5U2
1M7Diode_SMD:D_SMBD1
1MF-MSMF050-2 500mAMF_MSMF050_2:FUSM4632X85F1
1NCP1117-5.0_SOT223Package_TO_SOT_SMD:SOT-223-3_TabPin2U1
1ONLED_SMD:LED_0805_2012MetricGREEN1
1POWERSUPPLY_DC21MMXConnector_BarrelJack:BarrelJack_HorizontalX1
1RESETJumper:SolderJumper-2_P1.3mm_Open_Pad1.0x1.5mmJP2
1TS42031-160R-TR-7260switch:TS42RESET1
1USB-B_TH61729-1011BLF:AMPHENOL_61729-1011BLFX2

The 52 most common of 56 parts.

More from SuganyaBaskaran/kicad-projects

3
  • 2 layers57.8 × 36.8 mmAdjustable power supply, the printed circuit board in 3D

    Adjustable power supply

    SuganyaBaskaran/kicad-projects

    Portfolio, learning and practice attempts using KiCAD.

    9 parts
  • 4 layers108.6 × 79.5 mmTemperature sensor monitor, the printed circuit board in 3D

    Temperature sensor monitor

    SuganyaBaskaran/kicad-projects

    Portfolio, learning and practice attempts using KiCAD.

    7 parts
  • 2 layers108.6 × 87 mmEmbedded sensor monitor, the printed circuit board in 3D

    Embedded sensor monitor

    SuganyaBaskaran/kicad-projects

    Portfolio, learning and practice attempts using KiCAD.

    5 parts

Similar boards

  • 2 layers56.6 × 62.2 mmArduinoR3, the printed circuit board in 3D

    ArduinoR3

    Morethanmany2/Arduino-Uno

    As a part of my day-to-day use, i tried to design the Arduino UNO dev board using all the datasheet materials and footprints required for precise design.

    59 parts
  • 4 layers105.4 × 57.5 mmArduino uno r3, the printed circuit board in 3D

    Arduino uno r3

    rajeev2705/PCB_Projects-27-

    58 parts
  • 2 layers101.6 × 53.3 mmMega2560 JOHN, the printed circuit board in 3D

    Mega2560 JOHN

    johnkobbymensah1-lang/ARDUINO-MEGA-2560

    Arduino mega 2560 in kikad

    79 parts
  • 2 layers76 × 56 mm1231949B, the printed circuit board in 3D

    1231949B

    01231949/kicad

    assignment

    60 parts
  • 2 layers70 × 50.5 mmArduino Uno, the printed circuit board in 3D

    Arduino Uno

    Tetteh-EkuPrince/KicadProject_ArduinoUno

    46 parts
  • 2 layers158 × 34 mmTaggerMainboard, the printed circuit board in 3D

    TaggerMainboard

    Infinitag/Hardware

    Files for the INFINITAG hardware

    75 parts6
  • 4 layers124 × 89.4 mmATMega 328 PU Board, the printed circuit board in 3D

    ATMega 328 PU Board

    olexsu/ATmega328_control_Board

    Custom ATmega328 embedded control board designed in KiCad with Arduino firmware.

    140 parts

Questions

How big is the Arduino Uno R3 PCB?

It measures 97 × 75.5 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Arduino Uno R3 use?

56 parts, built around the ATMEGA16U2-MU, ATMEGA328P-PU, LMV358 and LP2985-33DBV. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Arduino Uno R3 KiCad files?

From the SuganyaBaskaran/kicad-projects repository on GitHub, at the commit this page was made from: the board is Arduino Uno R3/Arduino Uno R3.kicad_pcb and its schematic Adjustable power supply/Adjustable power supply.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Arduino Uno R3 design in my own project?

Its repository states no licence, so its author keeps all rights: ask SuganyaBaskaran before reusing the design.