

Electronics V2
Better Peter
- Size
- 102 × 62 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 90
- Nets
- 91
- Pads
- 424
- Tracks, vias
- 692, 77
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 28 Jan 2025
- Updated
- 27 Apr 2026
Overview
Electronics V2 is an open-source printed circuit board by Stuyoly-Tech, from the Stuyoly-Tech/Robot-Tour-Beter-2025 repository on GitHub. It is a 2-layer board of 102 × 62 mm with 90 parts on 91 nets, routed with 692 tracks and 77 vias.
It is built around the ESP32-S3-WROOM-1-N8, DAC081C081CIMK and TMC2209, with the TVS1400DRV and BC547 among its other parts. Its parts include 27 capacitors, 24 resistors, 11 ICs, 8 switches and 7 connectors. It belongs with the ESP32 boards of this library.
Main components
5ESP32-S3-WROOM-1-N8
SMD,25.5x18mm-40℃~+85℃ -98.2dBm 2.4GHz 20.5dBm 355mA 3V~3.6V 95mA Bluetooth5.0 ESP32-S3 Chip On-board PCB Antenna UART、SPI、I2C、I2S、USB SMD,25.5x18mm WiFi Modules ROHSEspressif SystemsWiFi ModulesDAC081C081CIMK
TSOT-23-6-40℃~+125℃ 0.6LSB 1 130nA 2.7V~5.5V 4.5us 8 I2C Power-on reset、Power-down mode、Multi-chip synchronization Voltage Buffer TSOT-23-6 Digital to Analog Converters (DAC) ROHSTexas InstrumentsDigital To Analog Converters (DAC)TMC2209
UncategorisedTRINAMICTVS1400DRV
WSON-6-EP(2x2)-40℃~+125℃ 120pF 14V 16.9V 19.3V 2.2nA 43A@8/20us 80W@8/20us IEC 61000-4-2、IEC 61000-4-5 TVS Unidirectional WSON-6-EP(2x2) ESD and Surge Protection (TVS/ESD) ROHSTexas InstrumentsESD And Surge Protection (TVS/ESD)BC547
TO-92Bipolar (BJT)Jiangsu Changjing Electronics Technology (CJ)
Parts
90| Qty | Value | Footprint | References |
|---|---|---|---|
| 17 | 100n | Capacitor_SMD:C_0603_1608Metric | C1, C2, C3, C5, C6, C10, C11, C12, C13, C14, C15, C16, C17, C18, C23, C24 +1 |
| 15 | 10k | Resistor_SMD:R_0603_1608Metric | R1, R2, R3, R9, R10, R11, R13, R14, R15, R16, R17, R18, R19, R25, R26 |
| 4 | 10u | Capacitor_SMD:C_0603_1608Metric | C19, C20, C21, C22 |
| 4 | 1k | Resistor_SMD:R_0603_1608Metric | R12, R21, R22, R23 |
| 4 | 330m | Resistor_SMD:R_0603_1608Metric | R4, R5, R8, R20 |
| 4 | LOGO | LOGO | G***, G***, G***, G*** |
| 2 | 100u | Capacitor_Tantalum_SMD:CP_EIA-7343-30_AVX-N | C4, C9 |
| 2 | 10n | Capacitor_SMD:C_0603_1608Metric | C26, C27 |
| 2 | 22n | Capacitor_SMD:C_0603_1608Metric | C8, C25 |
| 2 | NCP1117-3.3_SOT223 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U1, U7 |
| 2 | TMC2209 | Package_DFN_QFN:QFN-28-1EP_5x5mm_P0.5mm_EP3.75x3.75mm | U2, U9 |
| 2 | TVS1400DRV | Package_SON:WSON-6-1EP_2x2mm_P0.65mm_EP1x1.6mm | U10, U11 |
| 1 | 1.5k | Resistor_SMD:R_0603_1608Metric | R24 |
| 1 | BC547 | Package_TO_SOT_THT:TO-92_Inline | Q1 |
| 1 | BOOT | Button_Switch_SMD:SW_Push_1P1T_NO_CK_KMR2 | SW4 |
| 1 | BTN_0 | Button_Switch_SMD:SW_SPST_PTS645 | SW1 |
| 1 | BTN_1 | Button_Switch_SMD:SW_SPST_PTS645 | SW5 |
| 1 | BTN_2 | Button_Switch_SMD:SW_SPST_PTS645 | SW6 |
| 1 | BTN_3 | Button_Switch_SMD:SW_SPST_PTS645 | SW7 |
| 1 | Battery | TerminalBlock_Phoenix:TerminalBlock_Phoenix_PT-1,5-2-3.5-H_1x02_P3.50mm_Horizontal | BT1 |
| 1 | Buzzer | Buzzer_Beeper:Buzzer_12x9.5RM7.6 | BZ1 |
| 1 | DAC081C081CIMK | Package_TO_SOT_SMD:SOT-23-6 | U4 |
| 1 | D_Schottky | Package_TO_SOT_SMD:TO-277A | D2 |
| 1 | ESP32-S3-WROOM-1 | RF_Module:ESP32-S3-WROOM-1 | U3 |
| 1 | IMU_L | Package_LGA:Bosch_LGA-14_3x2.5mm_P0.5mm | U5 |
| 1 | IMU_R | Package_LGA:Bosch_LGA-14_3x2.5mm_P0.5mm | U6 |
| 1 | INCR_0 | Rotary_Encoder:RotaryEncoder_Bourns_Vertical_PEC12R-3x17F-Sxxxx | SW8 |
| 1 | L1 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_PT-1,5-2-3.5-H_1x02_P3.50mm_Horizontal | J6 |
| 1 | L2 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_PT-1,5-2-3.5-H_1x02_P3.50mm_Horizontal | J7 |
| 1 | LED_0 | LED_SMD:LED_0603_1608Metric | D3 |
| 1 | LED_3V3 | LED_SMD:LED_0603_1608Metric | D5 |
| 1 | LED_5V | LED_SMD:LED_0603_1608Metric | D6 |
| 1 | LED_SD | LED_SMD:LED_0603_1608Metric | D4 |
| 1 | MOT_L | TerminalBlock_Phoenix:TerminalBlock_Phoenix_PT-1,5-4-3.5-H_1x04_P3.50mm_Horizontal | J1 |
| 1 | MOT_R | TerminalBlock_Phoenix:TerminalBlock_Phoenix_PT-1,5-4-3.5-H_1x04_P3.50mm_Horizontal | J2 |
| 1 | MSTP_SEL | Button_Switch_SMD:SW_DIP_SPSTx02_Slide_6.7x6.64mm_W6.73mm_P2.54mm_LowProfile_JPin | SW2 |
| 1 | Power Probes | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J5 |
| 1 | RST | Button_Switch_SMD:SW_Push_1P1T_NO_CK_KMR2 | SW3 |
| 1 | SD_Card | Connector_Card:SD_Hirose_DM1AA_SF_PEJ82 | J3 |
| 1 | SSD1036 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | U8 |
| 1 | STATUS_LED | LED_SMD:LED_0603_1608Metric | D1 |
| 1 | USB_C_Receptacle_USB2.0_14P | Connector_USB:USB_C_Receptacle_GCT_USB4110 | J4 |
More from Stuyoly-Tech/Robot-Tour-Beter-2025
1- 2 layers100 × 60 mm

Similar boards
- 2 layers79 × 57.8 mm

- 2 layers80 × 64.8 mm

- 4 layers69 × 99 mm

- 6 layers80 × 49 mm

ButterStick
butterstick-fpga/butterstick-hardware
Basic ECP5 based GigE to SYZYGY interface.
256 parts225 - 4 layers80 × 49 mm

- 6 layers50 × 37 mm

Gregdavill advent calendar of circuits 2020 ecpbreaker
oomlout/oomlout_oomp_project_bot_v_2
124 parts - 4 layers326.3 × 76 mm

Mini project
Mohit623148/analog-parametric-equalizer
5-band analog parametric audio equalizer using State Variable Filter (SVF) topology — LTspice simulation + KiCad schematic & 4-layer PCB
89 parts1MIT - 4 layers57.3 × 48.3 mm

Questions
How big is the Electronics V2 PCB?
It measures 102 × 62 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Electronics V2 use?
90 parts, built around the ESP32-S3-WROOM-1-N8, DAC081C081CIMK, TMC2209 and TVS1400DRV. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Electronics V2 KiCad files?
From the Stuyoly-Tech/Robot-Tour-Beter-2025 repository on GitHub, at the commit this page was made from: the board is Electronics V2/Electronics V2.kicad_pcb and its schematic Electronics V2/Electronics V2.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Electronics V2 design in my own project?
Its repository states no licence, so its author keeps all rights: ask Stuyoly-Tech before reusing the design.