Skip to the content
4 layers57.3 × 48.3 mmES9033 prototype, the printed circuit board in 3D

prototype board with ES9033 DAC

Size
57.3 × 48.3 mm
Copper layers
4
Thickness
1.56 mm
Parts
48
Nets
44
Pads
180
Tracks, vias
229, 99
Pours
13
Routed
Yes
KiCad
KiCad 6 (file 20211014)
Created
9 Sep 2022
Updated
3 Oct 2022

Overview

ES9033 prototype is an open-source printed circuit board by fabianmuehlberger, from the fabianmuehlberger/ES9033_prototype repository on GitHub. It is a 4-layer board of 57.3 × 48.3 mm with 48 parts on 44 nets, routed with 229 tracks and 99 vias.

It is built around the ES9033Q, LT3042 and TVS1400DRV. Its parts include 14 capacitors, 9 resistors, 4 connectors, 3 ICs and 1 switch.

Main components

3

README

README.md

ES9033_prototype

prototype board with ES9033 DAC

Parts

48
QtyValueFootprintReferences
71uCapacitor_SMD:C_0805_2012MetricC201, C202, C203, C205, C207, C208, C211
6Jumper_3_OpenConnector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_VerticalJP203, JP204, JP205, JP206, JP207, JP208
447kResistor_SMD:R_0805_2012MetricR203, R204, R205, R206
4MountingHole_PadMountingHole:MountingHole_3.2mm_M3_DIN965_PadH101, H102, H103, H104
4NetTie_2NetTie:NetTie-2_SMD_Pad0.5mmNT201, NT202, NT203, NT204
22n2Capacitor_SMD:C_0805_2012MetricC209, C210
2300Resistor_SMD:R_0805_2012MetricR201, R202
2conn_2x4_P2.52mmConnector_PinHeader_2.54mm:PinHeader_2x04_P2.54mm_VerticalJ102, J103
2jumper_openJumper:SolderJumper-2_P1.3mm_Open_Pad1.0x1.5mmJP201, JP202
12u2Capacitor_SMD:C_0805_2012MetricC206
133k2Resistor_SMD:R_0805_2012MetricR301
1453kResistor_SMD:R_0805_2012MetricR302
149k9Resistor_SMD:R_0805_2012MetricR303
14u7project_lib:1206_splitC303
14u7Capacitor_SMD:C_0805_2012MetricC204
14u7Capacitor_SMD:C_1206_3216MetricC301
1Conn_01x02Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJ101
1Conn_01x04Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_VerticalJ104
1ECS-2520MV-xxx-xxOscillator:Oscillator_SMD_ECS_2520MV-xxx-xx-4Pin_2.5x2.0mmX201
1ES9033Package_DFN_QFN:QFN-28-1EP_5x5mm_P0.5mm_EP3.35x3.35mmU201
1LT3042Package_DFN_QFN:DFN-10-1EP_3x3mm_P0.5mm_EP1.7x2.5mmU302
1SW_SP3TButton_Switch_SMD:SW_SP3T_PCM13SW201
1TVS1400DRVPackage_SON:WSON-6-1EP_2x2mm_P0.65mm_EP1x1.6mmU301
1u47Capacitor_SMD:C_1206_3216MetricC302

Similar boards

  • 6 layers60 × 30 mmUdsp card, the printed circuit board in 3D

    Udsp card

    crsknr/hw_udsp-card

    A compact DSP development board for real-time embedded audio and sensing

    221 parts2GPL-3.0
  • 4 layers100 × 100 mmGammaSpectrometer, the printed circuit board in 3D

    GammaSpectrometer

    RobertGawron/GammaSpectrometer

    Device for quantitative analyze energy spectra of gamma-ray sources. Allows to study what radioactive isotopes in what quantities are present in measured sample.

    326 parts16MIT
  • 4 layers326.3 × 76 mmMini project, the printed circuit board in 3D

    Mini project

    Mohit623148/analog-parametric-equalizer

    5-band analog parametric audio equalizer using State Variable Filter (SVF) topology — LTspice simulation + KiCad schematic & 4-layer PCB

    89 parts1MIT
  • 2 layers79 × 57.8 mmStasisV3, the printed circuit board in 3D

    StasisV3

    Ace6Rings/Stasis-1

    project for stasis

    77 partsMIT
  • 4 layers174 × 111 mmPedalboard hw, the printed circuit board in 3D

    Pedalboard hw

    arjepsen/Pedalboard-integrated-audio

    A custom Raspberry Pi Compute Module 5 guitar-processing platform with integrated low-latency audio and a separate ESP32-S3 user-interface board.

    118 partsCERN-OHL-P-2.0
  • 2 layers161.3 × 91.4 mmAstroCam, the printed circuit board in 3D

    AstroCam

    engstad/AstroCam

    My hobby project is to create a camera suitable for astronomy pictures. Here you can follow my work. It is slow going, since I don't have much time to allocate for this. So don't expect too many updates.

    112 parts
  • 4 layers220 × 160.5 mmHauptplatine, the printed circuit board in 3D

    Hauptplatine

    JoshCrouch/HELIOS

    A basic SDR Project to practice designing an RF Front-End

    531 parts
  • 4 layers163.1 × 105 mmLEFT, the printed circuit board in 3D

    LEFT

    lnvke/DH-BTK-0

    Bluetooth keyboard HID device.

    109 parts

Questions

How big is the ES9033 prototype PCB?

It measures 57.3 × 48.3 mm and has 4 copper layers, 1.56 mm thick.

What parts does the ES9033 prototype use?

48 parts, built around the ES9033Q, LT3042 and TVS1400DRV. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the ES9033 prototype KiCad files?

From the fabianmuehlberger/ES9033_prototype repository on GitHub, at the commit this page was made from: the board is ES9033_prototype/ES9033_prototype.kicad_pcb and its schematic ES9033_prototype/DAC.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the ES9033 prototype design in my own project?

Its repository states no licence, so its author keeps all rights: ask fabianmuehlberger before reusing the design.