
JPL MP3 circuit
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

4-Layer XC7Z010 DDR3 Layout
7z010 ddr is an open-source printed circuit board by Stanlazy, from the Stanlazy/7z010_ddr repository on GitHub, published under the GPL-3.0 licence. It is a 4-layer board with 51 parts on 61 nets, routed with 2,035 tracks and 164 vias.
Its parts include 37 capacitors, 5 resistors and 2 ICs. It belongs with the fPGA and programmable logic boards and the FPGA and CPLD boards of this library.
A compact layout of XC7Z010 with DDR3.
Tested with DDR3L-1066 on PCB manufactured by JLC.
Traces are length matched to ±0.5mm with board thickness of 1.2mm
Package delay's equivalent length are calculated with dielectric constant of 4.05.
Traces are cutting reference plane? It works.™
| Qty | Value | Footprint | References |
|---|---|---|---|
| 26 | C | Capacitor_SMD:C_0201_0603Metric | C1, C2, C10, C11, C13, C14, C15, C16, C17, C18, C21, C23, C24, C25, C26, C28 +10 |
| 7 | C | Capacitor_SMD:C_0402_1005Metric | C6, C12, C20, C27, C32, C36, C37 |
| 6 | 40Ω | Resistor_SMD:R_Array_Convex_4x0402 | RN1, RN2, RN3, RN4, RN5, RN6 |
| 4 | C | Capacitor_SMD:C_0201_0603Metric_WideGap | C19, C22, C29, C31 |
| 3 | 80Ω | Resistor_SMD:R_0201_0603Metric | R1, R4, R5 |
| 1 | 240Ω | Resistor_SMD:R_0201_0603Metric | R3 |
| 1 | 4K7Ω | Resistor_SMD:R_0201_0603Metric | R2 |
| 1 | DDR3 | Package_BGA:BGA-96_9.0x13.0mm_Layout2x3x16_P0.8mm_NoPaste | U1 |
| 1 | xc7z010clg400 | Package_BGA:Xilinx_CLG400_NoPaste_JLC_Package_Delay | U2 |
The 50 most common of 51 parts.

hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!



murexrobotics/electrical
Highly integrated electronics design and printed circuit boards (PCBs) for the MATE ROV Competition. Attempt the impossible.


dbalsom/arduinoX86
An interface between an Arduino Due or Arduino GIGA and 8088, 8086, V20, V30, 186 or 286 CPUs

gcormier/esphome-pressure
esphome board with a differential pressure sensor, supporting a variety of power sources

51 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Stanlazy/7z010_ddr repository on GitHub, at the commit this page was made from: the board is 7z010_ddr.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).