2 layers41 × 34 mm
Canitcam omnivision ov5640
cnlohr/cnhardware
My dumping grounds for all my kicad projects and random hardware bringup.
16 parts114
4 layers110 × 67.8 mm
WildEye PCB
SpecterStrider/Wildeye_PCB_reviewpcb review for carter
- Size
- 110 × 67.8 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 40
- Nets
- 59
- Pads
- 198
- Tracks, vias
- 304, 63
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 25 Jul 2026
- Updated
- 28 Jul 2026
Overview
WildEye PCB is an open-source printed circuit board by SpecterStrider, from the SpecterStrider/Wildeye_PCB_review repository on GitHub. It is a 4-layer board of 110 × 67.8 mm with 40 parts on 59 nets, routed with 304 tracks and 63 vias.
It is built around the ESP32-S3-WROOM-1-N8, USBLC6-2SC6 and XC6206P182MR, with the XC6206P282MR among its other parts. Its parts include 17 capacitors, 6 resistors, 6 ICs, 3 connectors and 2 switches. It belongs with the ESP32 boards of this library.
Main components
4
ESP32-S3-WROOM-1-N8
SMD,25.5x18mm-40℃~+85℃ -98.2dBm 2.4GHz 20.5dBm 355mA 3V~3.6V 95mA Bluetooth5.0 ESP32-S3 Chip On-board PCB Antenna UART、SPI、I2C、I2S、USB SMD,25.5x18mm WiFi Modules ROHSEspressif SystemsWiFi Modules
USBLC6-2SC6
SOT-23-60.35pF、0.8pF 100nA 150W@8/20us 15V 2 5V 6A@8/20us 6V ESD SOT-23-6 ESD and Surge Protection (TVS/ESD) ROHSUMWESD And Surge Protection (TVS/ESD)
XC6206P182MR
SOT-23-25℃~+80℃@(Ta) 1 1.8V 250mA 280mV@(50mA) 40dB@(1kHz) 7uA 8V Fixed Over Current Protection、Short Circuit Protection Positive SOT-23 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSUMWVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
XC6206P282MR
SOT-23-3L-40℃~+85℃ 1 150mV@(100mA) 1uA 2.8V 200mA 6V Fixed Over Current Protection Positive SOT-23-3L Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTorex SemiconductorVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
README
README.mdWildeye_PCB_review
pcb review for carter
Parts
40| Qty | Value | Footprint | References |
|---|---|---|---|
| 9 | 10uF | Capacitor_SMD:C_0603_1608Metric | C1, C2, C3, C5, C7, C9, C12, C13, C15 |
| 8 | 100nF | Capacitor_SMD:C_0603_1608Metric | C4, C6, C8, C10, C11, C14, C16, C17 |
| 4 | MountingHole_2.7mm_M2.5 | MountingHole:MountingHole_2.7mm_M2.5 | M2.5_1, M2.5_2, M2.5_3, M2.5_4 |
| 2 | 10kΩ | Capacitor_SMD:C_0603_1608Metric | R1, R2 |
| 2 | SW_Push | Button_Switch_SMD:SW_SPST_TL3342 | SW1, SW2 |
| 1 | 1MΩ | Resistor_SMD:R_0603_1608Metric | R4 |
| 1 | 330kΩ | Resistor_SMD:R_0603_1608Metric | R5 |
| 1 | 330Ω | Resistor_SMD:R_0603_1608Metric | R3 |
| 1 | 5.1KΩ | Resistor_SMD:R_0603_1608Metric | R6 |
| 1 | Battery Pack - Connector | Connector_JST:JST_PH_B2B-PH-SM4-TB_1x02-1MP_P2.00mm_Vertical | J1 |
| 1 | Camera FPC Connector | Connector_FFC-FPC:Hirose_FH12-24S-0.5SH_1x24-1MP_P0.50mm_Horizontal | J2 |
| 1 | ESP32-S3-WROOM-1 | PCM_Espressif:ESP32-S3-WROOM-1U | U1 |
| 1 | LED | LED_SMD:LED_0603_1608Metric | D1 |
| 1 | MP1584EN Buck-Switching Regulator | WildEye_Footprints_Modules:MP1584EN | M1 |
| 1 | Micro_SD_Card | Connector_Card:microSD_HC_Hirose_DM3AT-SF-PEJM5 | U4 |
| 1 | PIR Socket | Connector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_Vertical | J3 |
| 1 | USBLC6-2SC6 | Package_TO_SOT_SMD:SOT-23-6 | U6 |
| 1 | USB_C_Plug_USB2.0 | Connector_USB:USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | U5 |
| 1 | XC6206P182MR | Package_TO_SOT_SMD:SOT-23-3 | U2 |
| 1 | XC6206P282MR | Package_TO_SOT_SMD:SOT-23-3 | U3 |
Similar boards
- 4 layers100 × 74 mm
Mission board
tmb5932/fixed-wing-drone
The basics needed to allow a RC plane to be turned autonomous on signal.
128 parts - 2 layers59 × 91 mm
Smart doorbell
calebhabesh/doorlink
Self-hosted ESP32-S3 smart doorbell with a custom PCB, Raspberry Pi gateway, and web dashboard
108 parts1MIT - 4 layers68.1 × 75 mm
- 2 layers
Esp32s3 pcb
prasannan-robots/Energy-Management-using-Surveillance-Camera
This is a project which uses camera to detect the humans and control indoor appliances
59 parts - 2 layers95 × 48 mm
Primis FaceTracker
Nieko27/Frame-Workshop
A repo for all things steam frame hardware.
50 parts93CERN-OHL-S-2.0 - 4 layers38.5 × 19.5 mm
- 4 layers246.5 × 95 mm
Viaggio
dataehora/beatconfused
A small web studio of fast, elegant, install-free music tools. Every tool is plain HTML, CSS and vanilla JavaScript with the Web Audio API — no build step, no dependencies, no accounts, works offline after first load.
215 parts1
Questions
How big is the WildEye PCB PCB?
It measures 110 × 67.8 mm and has 4 copper layers, 1.6 mm thick.
What parts does the WildEye PCB use?
40 parts, built around the ESP32-S3-WROOM-1-N8, USBLC6-2SC6, XC6206P182MR and XC6206P282MR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the WildEye PCB KiCad files?
From the SpecterStrider/Wildeye_PCB_review repository on GitHub, at the commit this page was made from: the board is PCB/WildEye_PCB.kicad_pcb and its schematic PCB/WildEye_PCB.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the WildEye PCB design in my own project?
Its repository states no licence, so its author keeps all rights: ask SpecterStrider before reusing the design.