

This is a project which uses camera to detect the humans and control indoor appliances
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 59
- Nets
- 64
- Pads
- 227
- Tracks, vias
- 514, 57
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 18 Aug 2025
- Updated
- 28 Nov 2025
Overview
Esp32s3 pcb is an open-source printed circuit board by prasannan-robots, from the prasannan-robots/Energy-Management-using-Surveillance-Camera repository on GitHub. It is a 2-layer board with 59 parts on 64 nets, routed with 514 tracks and 57 vias.
It is built around the ESP32-S3-WROOM-1-N8, AMS1117-1.5 and OSY50402C1C, with the ST-TF-003A and XC6206P282MR among its other parts. Its parts include 25 resistors, 10 capacitors, 9 diodes, 5 connectors and 4 ICs. It belongs with the ESP32 boards of this library.
Main components
5ESP32-S3-WROOM-1-N8
SMD,25.5x18mm-40℃~+85℃ -98.2dBm 2.4GHz 20.5dBm 355mA 3V~3.6V 95mA Bluetooth5.0 ESP32-S3 Chip On-board PCB Antenna UART、SPI、I2C、I2S、USB SMD,25.5x18mm WiFi Modules ROHSEspressif SystemsWiFi ModulesAMS1117-1.5
SOT-223-40℃~+125℃ 0.003%Vout 1 1.3V@(1A) 1.5V 18V 1A 5mA 60dB@(120Hz) Fixed Over Current Protection Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSUMWVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsOSY50402C1C
0402-40℃~+85℃ 1.8V~2.6V 120° 20mA 50mcd~200mcd 52mW 590nm Yellow 0402 LED Indication - Discrete ROHSOptoSupplyLED Indication - DiscreteST-TF-003A
UncategorisedUnknown makerXC6206P282MR
SOT-23-3L-40℃~+85℃ 1 150mV@(100mA) 1uA 2.8V 200mA 6V Fixed Over Current Protection Positive SOT-23-3L Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTorex SemiconductorVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
Parts
59| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 100 | Resistor_SMD:R_0402_1005Metric | R1, R4, R5, R6, R7, R8, R9, R14 |
| 8 | LED | LED_THT:LED_D5.0mm_IRGrey | D1, D2, D3, D4, D5, D6, D7, D8 |
| 5 | 100pF | Capacitor_SMD:C_0603_1608Metric | C1, C9, C10, C11, C14 |
| 4 | 10uF | Capacitor_SMD:C_0603_1608Metric | C5, C6, C7, C8 |
| 4 | 47K | Resistor_SMD:R_0402_1005Metric | R16, R17, R18, R19 |
| 4 | MountingHole_2.5mm | MountingHole:MountingHole_2.5mm | REF1, REF2, REF3, REF4 |
| 2 | 0 | Resistor_SMD:R_0402_1005Metric | R2, R21 |
| 2 | 2k | Resistor_SMD:R_0603_1608Metric | R31, R32 |
| 2 | Conn_01x03 | Connector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_Vertical | J3, J4 |
| 1 | 100k | Resistor_SMD:R_0402_1005Metric | R22 |
| 1 | 10K | Resistor_SMD:R_0805_2012Metric | R3 |
| 1 | 1K | Resistor_SMD:R_0402_1005Metric | R15 |
| 1 | 200 | Resistor_SMD:R_0402_1005Metric | R11 |
| 1 | 20k | Resistor_SMD:R_0603_1608Metric | R35 |
| 1 | 2N2219 | Package_TO_SOT_THT:TO-92 | Q1 |
| 1 | 4.7K | Resistor_SMD:R_0402_1005Metric | R10 |
| 1 | 633k | Resistor_SMD:R_0603_1608Metric | R23 |
| 1 | AMS1117-1.5 | Package_TO_SOT_SMD:SOT-89-3 | U3 |
| 1 | Conn_01x07 | Connector_PinSocket_2.54mm:PinSocket_1x07_P2.54mm_Vertical | J5 |
| 1 | ESP32-S3-WROOM-1 | RF_Module:ESP32-S3-WROOM-1 | U1 |
| 1 | Header2.54mm 1*8P | Connector_PinSocket_2.54mm:PinSocket_1x08_P2.54mm_Vertical | J2 |
| 1 | Key | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | U2 |
| 1 | LDR03 | OptoDevice:R_LDR_5.1x4.3mm_P3.4mm_Vertical | R38 |
| 1 | NC | Resistor_SMD:R_0402_1005Metric | R20 |
| 1 | OSY50402C1C | LED_THT:LED_D5.0mm | LED2 |
| 1 | SMD CAP 0.1uF | Capacitor_SMD:C_0603_1608Metric | C2 |
| 1 | ST-TF-003A | ST-TF-003A:SUNTECH_ST-TF-003A | P1 |
| 1 | TE_2-1734839-4_1x24-1MP_P0.5mm_Horizontal | Connector_FFC-FPC:TE_2-1734839-4_1x24-1MP_P0.5mm_Horizontal | U5 |
| 1 | XC6206P282MR | Package_TO_SOT_SMD:SOT-23-3 | 2.8V1 |
Similar boards
- 4 layers80 × 52.7 mm

- 2 layers97.8 × 66.2 mm

The Big One
iustinG-afk/The48ErrCar
ESP32-S3-WROOM-1 RC car controller PCB with Wi-Fi app control (KiCad, ESP-IDF, MIT App Inventor)
86 partsMIT - 2 layers56.1 × 49.1 mm

- 2 layers59 × 91 mm

Smart doorbell
calebhabesh/doorlink
Self-hosted ESP32-S3 smart doorbell with a custom PCB, Raspberry Pi gateway, and web dashboard
108 parts1MIT - 4 layers68.1 × 75 mm

- 4 layers110 × 67.8 mm

- 4 layers100 × 74 mm

Mission board
tmb5932/fixed-wing-drone
The basics needed to allow a RC plane to be turned autonomous on signal.
128 parts - 2 layers95 × 48 mm

Primis FaceTracker
Nieko27/Frame-Workshop
A repo for all things steam frame hardware.
50 parts93CERN-OHL-S-2.0
Questions
What parts does the Esp32s3 pcb use?
59 parts, built around the ESP32-S3-WROOM-1-N8, AMS1117-1.5, OSY50402C1C and ST-TF-003A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Esp32s3 pcb KiCad files?
From the prasannan-robots/Energy-Management-using-Surveillance-Camera repository on GitHub, at the commit this page was made from: the board is esp32s3_pcb/esp32s3_pcb.kicad_pcb and its schematic esp32s3_pcb/esp32s3_pcb.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Esp32s3 pcb design in my own project?
Its repository states no licence, so its author keeps all rights: ask prasannan-robots before reusing the design.