Skip to the content
2 layers159.9 × 99.9 mmSer4, the printed circuit board in 3D

solarenergyracers.ch - control system

Size
159.9 × 99.9 mm
Copper layers
2
Thickness
1.6 mm
Parts
10
Nets
30
Pads
60
Tracks, vias
0, 0
Routed
Not yet
KiCad
KiCad 5 (file 20171130)
Created
26 Jan 2021
Updated
17 Sep 2022

Overview

Ser4 is an open-source printed circuit board by SolarEnergyRacers, from the SolarEnergyRacers/solar_car_control_system repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 159.9 × 99.9 mm with 10 parts on 30 nets.

It is built around the ADS1115IDGS.

Main components

1

README

docs/electroCad/README.md

ELT-Schema and Board Design

[toc]

Open Questions

  • Do we need 5V and 3.3V on Main board?
  • Should we provide additional 5V to Steering-wheel board (brightness)?
  • Do we need one or two CAN bus transceivers?
  • The new designed elements (PCF, ADS) and other parts need to add a footprint in library

Rules and Hints

  • all new for SER4 designed elements should get the tag "SER4"

Main-board

Layout Idea

  • Board 150x100mount1

  • --> The IO and ADC board are stripped of of all connectors and reassembled, see below) mount2

To change connectors:

  • PCF8574 boards
    • remove all plugs
    • reassembly 9 pin plug (8 IOs and Interrupt) and 4 pin I2C pin (I2C) on backside
    • can possibly be shortened a little
    • drill mounting hole
  • ADS1115 grove boards
    • remove all plugs and connectors
    • reassembly 4 pins (analog in) and 4 pins (I2C) on backside
  • CAN
    • IC names missing in doc/data-sheets

Steering-wheel Board

Parts

10
QtyValueFootprintReferences
8SW_MEC_5EButton_Switch_THT:SW_MEC_5GTH9SW301, SW302, SW303, SW304, SW305, SW306, SW307, SW308
1ADS1115IDGSPackage_SO:TSSOP-10_3x3mm_P0.5mmADC2
1CR2013-MI2120Display:CR2013-MI2120Display0

Similar boards

  • 4 layers70 × 43 mmUSMU v10, the printed circuit board in 3D

    USMU v10

    joeltroughton/uSMU

    Credit card-sized, USB-powered 4 quadrant source-measure unit hardware and firmware

    137 parts187
  • 4 layers66.3 × 40.2 mmCm4 drone, the printed circuit board in 3D

    Cm4 drone

    dridri/bcflight

    Raspberry Pi based drone flight controller and remote control

    56 parts175GPL-3.0
  • 4 layers192.1 × 126.9 mmStradex1, the printed circuit board in 3D

    Stradex1

    Bylin-code/Stradex1

    STRADEX1 Documentation and Build Instructions ============== I've always wanted to put my violin skills to use in a MIDI environment, but there really isn't a controller on the market that can emulate the feel of a…

    24 parts101
  • 4 layers100 × 49.8 mmExpansion board, the printed circuit board in 3D

    Expansion board

    reubenstr/zuko

    A quadruped robot dog!

    75 parts51MIT
  • 2 layers96 × 74.4 mmMonolith, the printed circuit board in 3D

    Monolith

    luftaquila/monolith

    DIY wireless real-time datalogging platform for Student Formula and Baja.

    138 parts45
  • 4 layers160 × 73.2 mmMainPCB, the printed circuit board in 3D

    MainPCB

    doppelgrau/esp32-f9p-io-board

    An IO-PCB (two motor-driver/H-bridge, CAN, RS232, ADS1115, relay, ethernet, ardusimple f9p compatible connector) with an ESP32 for 12V power, three 15V tolerant analog inputs, three 5V tolerant inputs.

    162 parts39
  • 2 layers140.7 × 86.5 mmUPD board, the printed circuit board in 3D

    UPD board

    uniclogs/uniclogs-hardware

    University Class Open Ground Station Hardware

    185 parts32GPL-3.0
  • 4 layers20 × 30 mmNanoAmmeter v2, the printed circuit board in 3D

    NanoAmmeter v2

    joeltroughton/nanoAmmeter

    A small ammeter for measuring printed glucose biosensors

    35 parts29

Questions

How big is the Ser4 PCB?

It measures 159.9 × 99.9 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Ser4 use?

10 parts, built around the ADS1115IDGS. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Ser4 KiCad files?

From the SolarEnergyRacers/solar_car_control_system repository on GitHub, at the commit this page was made from: the board is docs/electroCad/ser4.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Ser4 design in my own project?

Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).