
TeensyMaestro Main PCB
rimuadmin/TeensyMaestro-Hardware
Hardware for the TeensyMaestro

A standalone TCA8418 PCB with a 3x4 keypad
Multi Tap Keypad is an open-source printed circuit board by Slankydudl, from the Slankydudl/T9-Keypad-Module repository on GitHub. It is a 2-layer board of 44 × 43 mm with 23 parts on 48 nets, routed with 176 tracks and 19 vias.
It is built around the TS-1187A-B-A-B and B5B-XH-A(LF)(SN). Its parts include 12 switches, 4 resistors, 3 fuses, 2 capacitors and 1 IC. It belongs with the keyboards and input boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | SW-SMD_4P-L5.1-W5.1-P3.70-LS6.5-TL_H1.5 | MyLib:easyeda2kicad__TS-1187A-B-A-B_2a0d7a9c99 | SW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8, SW9, SW10, SW11, SW12 |
| 3 | 4.7kΩ | MyLib:PCM_JLCPCB__R_0603_737c711aa2 | R1, R2, R3 |
| 3 | G-fid | MyLib:Self_Made__JLCPCB_Global_Fiducial_fe76e9f661 | F1, F1, F1 |
| 1 | 100nF | MyLib:PCM_JLCPCB__C_0603_631b1e4012 | C2 |
| 1 | 10kΩ | MyLib:PCM_JLCPCB__R_0603_737c711aa2 | R4 |
| 1 | 10uF | MyLib:PCM_JLCPCB__C_0603_631b1e4012 | C1 |
| 1 | 6pin header | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J1 |
| 1 | TCA8418RTWR | MyLib:easyeda2kicad__TCA8418RTWR_3b4f66023a | U1 |

rimuadmin/TeensyMaestro-Hardware
Hardware for the TeensyMaestro


kaihchang/Kai_Simple_split_keyboard
Kai Simple is a cradio (or some call it Sweep) variation that fits author's hands best. Author's first KB design: https://github.com/kaihchang/Ascendsplaysplitkeyboard


AndreyPodlesni/stm32wl-lora-rf-pcb
4-layer RF PCB design of a low-power LoRa sensor node based on STM32WLE5CCU6, featuring 50Ω controlled impedance RF routing, SMA antenna interface, and HDC2022 temperature & humidity sensor. Designed in KiCad.

doug7410/nowplaying-appliance
Build guide, BOM and hardware for the Now-Playing desk appliance: HUB75 spectrum + touch now-playing display driven by room-mic song recognition


Emwm/BikeLightIoT7
An ESP32-based smart tracking and monitoring system for bicycles, combining GNSS (GPS) tracking, motion detection, power management, battery monitoring, and LoRa communication to create an intelligent, low-power system…
It measures 44 × 43 mm and has 2 copper layers, 1.6 mm thick.
23 parts, built around the TS-1187A-B-A-B and B5B-XH-A(LF)(SN). The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Slankydudl/T9-Keypad-Module repository on GitHub, at the commit this page was made from: the board is Multi Tap Keypad.kicad_pcb and its schematic Multi Tap Keypad.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask Slankydudl before reusing the design.