4 layers110 × 100 mm
4 layers49.4 × 49.5 mm
Open Source Antminer Hashboard Tester
- Size
- 49.4 × 49.5 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 64
- Nets
- 70
- Pads
- 244
- Tracks, vias
- 504, 82
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 5 Jan 2024
- Updated
- 5 Jan 2024
Overview
AntFix is an open-source printed circuit board by SirVapes, from the SirVapes/HashHero-Tester repository on GitHub, published under the MIT licence. It is a 4-layer board of 49.4 × 49.5 mm with 64 parts on 70 nets, routed with 504 tracks and 82 vias.
It is built around the PCA9546ARGVR, M93C46-WDW6TP and RT9080-33GJ5. Its parts include 17 capacitors, 15 resistors, 4 ICs, 3 connectors and 1 switch.
Main components
3
PCA9546ARGVR
VQFN-16-EP(4x4)VQFN-16-EP(4x4) Interface - Specialized ROHSTexas InstrumentsInterface - Specialized
M93C46-WDW6TP
TSSOP-8-40℃~+85℃ 1Kbit 2.5V~5.5V 200 Years 2MHz 4,000,000 Cycles 5ms Noise suppression function、Built-in power-on reset (POR)、Built-in write enable latch (WEL) TSSOP-8 EEPROM ROHSSTMicroelectronicsEEPROM
RT9080-33GJ5
TSOT-23-5-40℃~+125℃@(Tj) 1 2uA 3.3V 360mV@(600mA) 42uVrms 5.5V 600mA 75dB@(1kHz) Fixed Over Current Protection、Over Temperature Protection、Enable Positive TSOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSRichtek TechVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
README
README.mdHashHero
Open Source Antminer Hashboard Tester
Parts
64| Qty | Value | Footprint | References |
|---|---|---|---|
| 15 | TestPoint | TestPoint:TestPoint_Pad_D1.5mm | TP2, TP5, TP6, TP7, TP8, TP9, TP10, TP11, TP15, TP16, TP17, TP18, TP19, TP20, TP25 |
| 10 | 0.1uF | Capacitor_SMD:C_0805_2012Metric | C9, C10, C11, C12, C13, C14, C15, C16, C17, C21 |
| 7 | 4.7K | Resistor_SMD:R_0805_2012Metric | R1, R2, R3, R20, R21, R39, R40 |
| 4 | MountingHole_Pad | DOWNLOADED:MountingHole_3mm_Pad | H1, H2, H3, H4 |
| 3 | 10K | Resistor_SMD:R_0805_2012Metric | R7, R8, R9 |
| 2 | 1uF | Capacitor_SMD:C_0805_2012Metric | C7, C8 |
| 2 | 27pf | Capacitor_SMD:C_0805_2012Metric | C1, C2 |
| 2 | 4.7uF | Capacitor_SMD:CP_Elec_4x5.4 | C18, C19 |
| 2 | 5.1K | Resistor_SMD:R_0805_2012Metric | R4, R5 |
| 2 | FerriteBead_Small | Resistor_SMD:R_0603_1608Metric | FB1, FB2 |
| 2 | LOGO | LOGO | G***, G*** |
| 1 | 12K | Resistor_SMD:R_0805_2012Metric | R12 |
| 1 | 12MHz | DOWNLOADED:XTAL_405C35B12M00000 | Y1 |
| 1 | 1K | Resistor_SMD:R_0805_2012Metric | R11 |
| 1 | 2.2K | Resistor_SMD:R_0805_2012Metric | R6 |
| 1 | 3.3uF | Capacitor_SMD:C_0805_2012Metric | C6 |
| 1 | FT4232HQ | DOWNLOADED:QFN50P900X900X105-65N | U1 |
| 1 | Hashboard0 | DOWNLOADED:CONN-SMD_X2026WRS-2X09D-LPSW | J2 |
| 1 | M93C46-WDW6TP | DOWNLOADED:TSSOP8_STM | U3 |
| 1 | PCA9546ARGVR | DOWNLOADED:QFN-16_EP_4x4_Pitch0.65mm | U5 |
| 1 | PSU Comm | DOWNLOADED:CONN-TH_6P-P2.00_PHD-2X3A | J1 |
| 1 | RT9080-33GJ5 | DOWNLOADED:RT9080-33GJ5 | U2 |
| 1 | SW_SPDT | DOWNLOADED:OS102011MA1QN1 | SW1 |
| 1 | USB_C_Receptacle_USB2.0 | Connector_USB:USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J8 |
Similar boards
- 4 layers110 × 100 mm
- 4 layers56.5 × 99.8 mm
BitaxeGamma
bitaxeorg/bitaxeGamma
Bitaxe based on the BM1370 from the S21 Pro
147 parts432CERN-OHL-S-2.0 - 2 layers80 × 129.1 mm
Smart Plant
JGAguado/Smart_Plant
The Smart Plant is a board that can be plugged directly on the soil, close to the plant, that allows the measurement of the environment (soil moisture, environment temperature & illuminance), and presents the…
75 parts303 - 4 layers84.5 × 129.5 mm
- 4 layers106.6 × 205.2 mm
SparkFun Thing Plus ESP32-S3 panelized
Valar-Systems/MiniSpeedCam
MiniSpeedCam
1,652 parts116CERN-OHL-S-2.0 - 4 layers138.1 × 104.6 mm
V7-kaleido
vroland/epdiy-hardware
Hardware design files for EPDiy: https://github.com/vroland/epdiy.
140 parts75CC-BY-SA-4.0 - 2 layers100 × 50 mm
Questions
How big is the AntFix PCB?
It measures 49.4 × 49.5 mm and has 4 copper layers, 1.6 mm thick.
What parts does the AntFix use?
64 parts, built around the PCA9546ARGVR, M93C46-WDW6TP and RT9080-33GJ5. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the AntFix KiCad files?
From the SirVapes/HashHero-Tester repository on GitHub, at the commit this page was made from: the board is AntFix.kicad_pcb and its schematic AntFix.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the AntFix design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).