4 layers36 × 64 mm
2 layers24.5 × 19.1 mm
Amini KiCad Lock
SimonDar/Amini_KiCad_Lock- Size
- 24.5 × 19.1 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 48
- Nets
- 85
- Pads
- 221
- Tracks, vias
- 458, 73
- Pours
- 18
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 28 May 2024
- Updated
- 26 Jul 2024
Overview
Amini KiCad Lock is an open-source printed circuit board by SimonDar, from the SimonDar/Amini_KiCad_Lock repository on GitHub. It is a 2-layer board of 24.5 × 19.1 mm with 48 parts on 85 nets, routed with 458 tracks and 73 vias.
It is built around the 2450AT18D0100E. Its parts include 19 capacitors, 4 diodes, 4 inductors, 3 resistors and 3 connectors. It belongs with the nRF52 and nRF5x boards of this library.
Main components
1Parts
48| Qty | Value | Footprint | References |
|---|---|---|---|
| 9 | 100nF | Nordic_Semiconductor:CAPC0603X03L_C | C6, C8, C9, C10, C11, C12, C13, C14, C15 |
| 6 | clipboard:7f799c2c-a0ec-4dfc-857c-f149acab8d33 | , , , , , | |
| 4 | 1.0µF | Nordic_Semiconductor:CAPC1005X04L | C2, C3, C5, C16 |
| 4 | TestPoint | TestPoint:TestPoint_Pad_D1.5mm | clk, gnd, io, set |
| 3 | 220R | Nordic_Semiconductor:RESC0603X03L_C | R1, R2, R3 |
| 3 | L0603G | LED_SMD:LED_0603_1608Metric | LED1, LED2, LED3 |
| 2 | 0 | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C1, C18 |
| 2 | 10µH | Nordic_Semiconductor:INDC1608X06L | L2, L3 |
| 1 | 0.7pF | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C17 |
| 1 | 0r | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | L1 |
| 1 | 1.0µF | Capacitor_SMD:C_0402_1005Metric | C7 |
| 1 | 2.2nF | Nordic_Semiconductor:CAPC0603X03L_C | C4 |
| 1 | 2.2nH | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | L4 |
| 1 | 2450AT18D0100 | Nordic_Semiconductor:2450AT18D0100_STD-R | A1 |
| 1 | 32.768kHz | Nordic_Semiconductor:XTAL_2012 | X2 |
| 1 | 32MHz | Nordic_Semiconductor:BT-XTAL_2016 | X1 |
| 1 | Conn_01x02_Pin | Connector_PinHeader_2.00mm:PinHeader_1x02_P2.00mm_Vertical | J1 |
| 1 | Conn_01x04 | Connector_PinHeader_2.54mm:PinHeader_2x02_P2.54mm_Vertical | J2 |
| 1 | Conn_01x04_Pin | Connector_PinHeader_2.00mm:PinHeader_1x04_P2.00mm_Vertical | J3 |
| 1 | D | Diode_SMD:D_0402_1005Metric_Pad0.77x0.64mm_HandSolder | D1 |
| 1 | N.C. | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C19 |
| 1 | SolderJumper_2_Bridged | Jumper:SolderJumper-2_P1.3mm_Bridged_RoundedPad1.0x1.5mm_1 | JP1 |
| 1 | nRF5340-QKxx | Package_DFN_QFN:Nordic_AQFN-94-1EP_7x7mm_P0.4mm | U1 |
Similar boards
- 2 layers42 × 32 mm
RAMS - PCB
JanClyde05/Road-Accident-Monitoring-System
This directory contains the planning, specification, and initial KiCad project for RAMS Wearable PCB Revision C. Do not fabricate from this directory yet -- manual schematic wiring and DRC verification are still needed.
68 parts1 - 4 layers82.4 × 59.6 mm
- 4 layers64.2 × 35.5 mm
- 4 layers67.6 × 63 mm
- 2 layers
- 4 layers53.7 × 46.9 mm
- 4 layers32.2 × 34.1 mm
Questions
How big is the Amini KiCad Lock PCB?
It measures 24.5 × 19.1 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Amini KiCad Lock use?
48 parts, built around the 2450AT18D0100E. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Amini KiCad Lock KiCad files?
From the SimonDar/Amini_KiCad_Lock repository on GitHub, at the commit this page was made from: the board is Amini_Kicad_Lock.kicad_pcb and its schematic Amini_Kicad_Lock.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Amini KiCad Lock design in my own project?
Its repository states no licence, so its author keeps all rights: ask SimonDar before reusing the design.