
FlightPCB
Shubhamai/tsar
General-purpose & fully programmable flight computer PCB desgined in KiCad EDA

General-purpose & fully programmable flight computer PCB desgined in KiCad EDA
FlightPCB is an open-source printed circuit board by Shubhamai, from the Shubhamai/tsar repository on GitHub. It is a 4-layer board of 49.6 × 99.8 mm with 205 parts on 244 nets, routed with 3,284 tracks and 418 vias.
It is built around the MIMXRT1062DVJ6B, MKL02Z32VFG4 and 2450FM07A0029001T, with the W25Q64JVXGIM, BMP390 and MMC5983MA among its other parts. Its parts include 61 capacitors, 59 resistors, 11 ICs, 8 connectors and 5 inductors. It belongs with the NXP (LPC, Kinetis, i.MX RT) boards of this library.
This repository contains Tsar flight computer that I have been developing for autonomous vehicles. The goal is to build a general-purpose & fully programmable flight computer that can be used for any autonomous model vehicles. The design is intended to be modular, cost-effective, and easy to manufacture.
The PCB is designed in KiCad and updated to version 8.0.3.

The design is very similar to V2 but with different IO style and no pyro channels. The secondary chip is STM32G0 for a lower number of components. The design is still in progress.

With learnings from V1, V2 was designed to be more cost-effective, less complex, and easier to manufacture. The BOM cost was around $60-80, and the board had 4 layers. With a trace width and minimum clearance of 0.2mm, QFN chips, and 0603 components, it was easier to manufacture and assemble. The board was manufactured and partially tested but not yet used in flight.

The first attempt at designing a flight computer. The design was powerful, using Teensy, but highly complex and less cost-effective. The BOM cost was around $120-150, and the board had 4 layers. With a trace width and minimum clearance of 0.127mm, BGA chips, and 0402 components, it was challenging to manufacture and assemble. This version was never manufactured or tested.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 18 | 100nF | Capacitor_SMD:C_0603_1608Metric | C1, C11, C17, C18, C20, C23, C55, C56, C57, C58, C59, C60, C61, C62, C63, C65 +2 |
| 12 | 1k | Resistor_SMD:R_0603_1608Metric | R15, R17, R18, R19, R20, R21, R22, R23, R24, R32, R45, R46 |
| 11 | 0.22uF | Capacitor_SMD:C_0402_1005Metric | C27, C29, C30, C34, C35, C40, C42, C44, C46, C47, C48 |
| 7 | 4.7uF | Capacitor_SMD:C_0603_1608Metric | C2, C3, C32, C36, C37, C39, C41 |
| 6 | 2.2k | Resistor_SMD:R_0603_1608Metric | R43, R44, R47, R48, R51, R52 |
| 5 | 100k | Resistor_SMD:R_0603_1608Metric | R39, R41, R55, R57, R59 |
| 5 | 1k | Resistor_SMD:R_0402_1005Metric | R26, R31, R33, R34, R35 |
| 4 | 1 | Resistor_SMD:R_0603_1608Metric | R3, R4, R7, R37 |
| 4 | 10nF | Capacitor_SMD:C_0402_1005Metric | C4, C7, C45, C49 |
| 4 | 10uF | Capacitor_SMD:C_0603_1608Metric | C33, C38, C43, C68 |
| 4 | 27k | Resistor_SMD:R_0603_1608Metric | R53, R54, R56, R58 |
| 4 | 470 | Resistor_SMD:R_0603_1608Metric | R9, R11, R12, R38 |
| 4 | 5.1k | Resistor_SMD:R_0603_1608Metric | R1, R2, R14, R16 |
| 4 | MountingHole_Pad | MountingHole:MountingHole_2.7mm_M2.5_Pad_Via | H1, H2, H3, H4 |
| 4 | ZXMN2F30FH | Package_TO_SOT_SMD:SOT-23 | Q2, Q3, Q4, Q5 |
| 3 | 1uF | Capacitor_SMD:C_0603_1608Metric | C6, C54, C64 |
| 3 | TestPoint | TestPoint:TestPoint_Pad_D1.0mm | TP2, TP4, TP9 |
| 2 | 100nF | Capacitor_SMD:C_0402_1005Metric | C8, C10 |
| 2 | 10uF | Capacitor_SMD:C_0805_2012Metric | C5, C15 |
| 2 | 12pF | Capacitor_SMD:C_0402_1005Metric | C50, C51 |
| 2 | 20pF | Capacitor_SMD:C_0402_1005Metric | C52, C53 |
| 2 | 27 | Resistor_SMD:R_0603_1608Metric | R49, R50 |
| 2 | 27pF | Capacitor_SMD:C_0603_1608Metric | C66, C67 |
| 2 | 30k | Resistor_SMD:R_0603_1608Metric | R13, R30 |
| 2 | 4.7uH | Inductor_SMD:L_0805_2012Metric | L2, L4 |
| 2 | Antenna | Connector_Coaxial:SMA_Amphenol_901-144_Vertical | AE1, AE3 |
| 2 | DNF | Resistor_SMD:R_0603_1608Metric | R27, R36 |
| 2 | Polyfuse | Fuse:Fuse_1206_3216Metric | F1, F2 |
| 2 | W25Q64JVXGIM | MIMXRT1062DVJ6B:XSON8_4x4mm | U16, U17 |
| 1 | 0 | Resistor_SMD:R_0402_1005Metric | R25 |
| 1 | 0.01 | Resistor_SMD:R_2512_6332Metric | R8 |
| 1 | 10 nF, 10%, 16 V, X7R | Capacitor_SMD:C_0603_1608Metric | C14 |
| 1 | 10 Ω, 5%, 0.25 W | Resistor_SMD:R_0402_1005Metric | R6 |
| 1 | 100k | Resistor_SMD:R_0805_2012Metric | R5 |
| 1 | 10k | Resistor_SMD:R_0603_1608Metric | R28 |
| 1 | 113k | Resistor_SMD:R_0603_1608Metric | R10 |
| 1 | 120 | Inductor_SMD:L_0805_2012Metric | L3 |
| 1 | 15uH | Inductor_SMD:L_0805_2012Metric | L1 |
| 1 | 2.2M | Resistor_SMD:R_0603_1608Metric | R42 |
| 1 | 2.2uF | Capacitor_SMD:C_0603_1608Metric | C31 |
| 1 | 220k | Resistor_SMD:R_0603_1608Metric | R29 |
| 1 | 22uF | Capacitor_SMD:C_0805_2012Metric | C19 |
| 1 | 2450FM07A0029001T | CustomFootprints:2450FM07A0029001T | U7 |
| 1 | 27 nH, 5% | Inductor_SMD:L_0402_1005Metric | L5 |
| 1 | 3.3V Power ( Green ) | LED_SMD:LED_0402_1005Metric | D3 |
| 1 | 32.768 kHz | Crystal:Crystal_SMD_2012-2Pin_2.0x1.2mm | Y3 |
| 1 | 470K | Resistor_SMD:R_0603_1608Metric | R40 |
| 1 | 470nF | Capacitor_SMD:C_0402_1005Metric | C9 |
| 1 | 52MHz | Crystal:Crystal_SMD_2016-4Pin_2.0x1.6mm | Y1 |
| 1 | AP7361C-33FGE-7 | Package_DFN_QFN:MLF-8-1EP_3x3mm_P0.65mm_EP1.55x2.3mm | U5 |
| 1 | BAT54C | Package_TO_SOT_SMD:SOT-23 | D12 |
| 1 | BMI088 | CustomFootprints:BMI088 | U22 |
| 1 | BMP390 | CustomFootprints:BMP390 | U9 |
| 1 | Buzzer | Buzzer_Beeper:Buzzer_CUI_CPT-9019S-SMT | BZ1 |
| 1 | Crystal | Crystal:Crystal_SMD_Abracon_ABM8G-4Pin_3.2x2.5mm | Y4 |
| 1 | Crystal_GND23 24 MHz | Crystal:Crystal_SMD_Abracon_ABM3B-4Pin_5.0x3.2mm | Y2 |
| 1 | Enable Power | TerminalBlock_Phoenix:TerminalBlock_Phoenix_PT-1,5-2-5.0-H_1x02_P5.00mm_Horizontal | J3 |
| 1 | GPS ( Blue ) | LED_SMD:LED_0402_1005Metric | D8 |
| 1 | GPS RXD | TestPoint:TestPoint_Pad_D1.0mm | TP5 |
| 1 | GPS TXD | TestPoint:TestPoint_Pad_D1.0mm | TP6 |
| 1 | INA219AxDCN | Package_TO_SOT_SMD:SOT-23-8 | U11 |
| 1 | INT1 | Jumper:SolderJumper-2_P1.3mm_Bridged_Pad1.0x1.5mm | JP1 |
| 1 | INT2 | Jumper:SolderJumper-2_P1.3mm_Bridged_Pad1.0x1.5mm | JP2 |
| 1 | LOGO | LOGO | G*** |
| 1 | MAX-M10S | RF_GPS:ublox_MAX | U1 |
| 1 | MIMXRT1062DVJ6B | MIMXRT1062DVJ6B:BGA196C80P14X14_1200X1200X152 | IC1 |
| 1 | MKL02Z32VFG4 | Package_DFN_QFN:QFN-16-1EP_3x3mm_P0.5mm_EP1.9x1.9mm | U13 |
| 1 | MMC5983MA | CustomFootprints:MMC5983MA | U2 |
| 1 | Micro_SD_Card | Connector_Card:microSD_HC_Molex_47219-2001 | J31 |
| 1 | OnOFF | TestPoint:TestPoint_Pad_D1.0mm | TP13 |
| 1 | PDZ10B, 115 10V 400mW | Diode_SMD:D_0805_2012Metric | D1 |
| 1 | PMIC_ON_REQ | TestPoint:TestPoint_Pad_D1.0mm | TP12 |
| 1 | PTB2 | TestPoint:TestPoint_Pad_D1.0mm | TP11 |
| 1 | Polyfuse | Fuse:Fuse_1812_4532Metric | F3 |
| 1 | Power In | TerminalBlock_Phoenix:TerminalBlock_Phoenix_PT-1,5-2-5.0-H_1x02_P5.00mm_Horizontal | J2 |
| 1 | Pyro 1 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_PT-1,5-2-5.0-H_1x02_P5.00mm_Horizontal | J5 |
| 1 | Pyro 2 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_PT-1,5-2-5.0-H_1x02_P5.00mm_Horizontal | J6 |
| 1 | Pyro 3 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_PT-1,5-2-5.0-H_1x02_P5.00mm_Horizontal | J7 |
| 1 | Pyro 4 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_PT-1,5-2-5.0-H_1x02_P5.00mm_Horizontal | J10 |
| 1 | Pyro Arm | TerminalBlock_Phoenix:TerminalBlock_Phoenix_PT-1,5-2-5.0-H_1x02_P5.00mm_Horizontal | J4 |
The 177 most common of 205 parts.

Wierdwizard2587/Custom-Teensy-4.1-PCB-Design
Custom Designed MCU design based upon Teensy 4.1





Kev1n8088/OshTelemega
The Mega3080 FCU is an evolved clone of the Altus Metrum Telemega. Using the same firmware (meaning the same sensor suite), the primary developments are: - USB-C - Wago style spring terminals - Better GPS RF routing…


katetriestocode/trailmap
this is the working version! (disclaimer: no antenna as it has not delivered yet, so manual gps coords insertion for now!)
It measures 49.6 × 99.8 mm and has 4 copper layers, 1.58 mm thick.
205 parts, built around the MIMXRT1062DVJ6B, MKL02Z32VFG4, 2450FM07A0029001T and W25Q64JVXGIM. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Shubhamai/tsar repository on GitHub, at the commit this page was made from: the board is v1/FlightPCB.kicad_pcb and its schematic v1/FlightPCB.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask Shubhamai before reusing the design.