Skip to the content
2 layersProj1, the printed circuit board in 3D

This repository contains the schematic diagram for a smart tap based on IR sensor.

Copper layers
2
Thickness
1.6 mm
Parts
12
Nets
10
Pads
44
Tracks, vias
120, 2
Pours
2
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
19 Jul 2025
Updated
19 Jul 2025

Overview

Proj1 is an open-source printed circuit board by Shreya-A-K, from the Shreya-A-K/Smart_tap_project repository on GitHub. It is a 2-layer board with 12 parts on 10 nets, routed with 120 tracks and 2 vias.

It is built around the TSSP58038. Its parts include 5 resistors, 2 capacitors, 2 ICs, 1 diode and 1 transistor.

Main components

1

README

README.md

Smart_tap_project

This repository contains the schematic diagram for a smart tap based on IR sensor. This a simple project made using components like IR sensor, 555 timer IC, n-MOSFET, solenoid valve, DC motor etc.

Parts

12
QtyValueFootprintReferences
21kResistor_SMD:R_0201_0603MetricR4, R5
110kResistor_SMD:R_0201_0603MetricR3
110nFCapacitor_SMD:C_0603_1608MetricC1
12.2kResistor_SMD:R_0201_0603MetricR1
1330kResistor_SMD:R_0201_0603MetricR2
182muFCapacitor_SMD:C_0603_1608MetricC2
19VBattery:BatteryHolder_Keystone_103_1x20mmBT1
1LEDLED_SMD:LED_0201_0603MetricD1
1LM555xMPackage_SO:SOIC-8_3.9x4.9mm_P1.27mmU2
1NMOSmosfet_library:MosfetQ1
1TSSP58038OptoDevice:Vishay_MINICAST-3PinU1

Similar boards

  • 2 layers11 × 22.1 mmIr smart led controller, the printed circuit board in 3D

    Ir smart led controller

    dotcypress/ir-smart-led-controller

    IR Remote Controller for WS2812(or analog) LED Strip

    7 parts10Apache-2.0
  • 2 layers57.7 × 50 mmKiCAD Board, the printed circuit board in 3D

    KiCAD Board

    XasWorks/dragon-home

    A rework of our old SmartHome project, this time done cleanly and neatly~

    47 parts8GPL-3.0
  • 2 layers57.8 × 34 mmDangerDonut, the printed circuit board in 3D

    DangerDonut

    gavin4d/dangerDonut

    Danger Donut is a work-in-progress 150 gram melty brain combat robot.

    65 parts5
  • 2 layers188.9 × 115 mmLayer3, the printed circuit board in 3D

    Layer3

    8076ducc/robocup-2025

    ducc.'s RCJ Soccer 2025 Team Repository

    59 parts4
  • 2 layers95 × 90.5 mmTeensy ver, the printed circuit board in 3D

    Teensy ver

    MUNAKATA-EPC/Artemis_2023

    アルテミス2023シーズンのリポジトリです。詳しくはwikiで。

    151 parts2
  • 2 layers50 × 58 mmMonitor osd control, the printed circuit board in 3D

    Monitor osd control

    amos42/pcb_monitor_osd_control

    Monitor OSD Control Board

    21 parts1
  • 4 layers76.2 × 25.4 mmCurio, the printed circuit board in 3D

    Curio

    dotcypress/curio

    Glorified Infrared Remote Control.

    31 parts1
  • 2 layers84.9 × 59.5 mmIR PCB, the printed circuit board in 3D

    IR PCB

    Kushal-Sachdeva78/VVS-Ballers-RoboCup

    Autonomous RoboCupJunior Soccer (IR League) robots by Team VVS Ballers: 9th place at RoboCup 2026 in Incheon. Teensy 4.1 multi-board electronics, IR/line/ultrasonic sensing, OpenMV vision, 48 V solenoid kicker.

    54 parts1MIT

Questions

What parts does the Proj1 use?

12 parts, built around the TSSP58038. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Proj1 KiCad files?

From the Shreya-A-K/Smart_tap_project repository on GitHub, at the commit this page was made from: the board is Proj1.kicad_pcb and its schematic Proj1.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Proj1 design in my own project?

Its repository states no licence, so its author keeps all rights: ask Shreya-A-K before reusing the design.