
Bldc&foc motor controller
bejaouihamza/bldc-foc-pcb
This open-source hardware project is a compact, single-board FOC (Field-Oriented Control) motor driver designed for precision robotics, drones, CNC machines, and automation systems.

Machine base borad is an open-source printed circuit board by ShaYJ555, from the ShaYJ555/harvester repository on GitHub. It is a 4-layer board of 85 × 95 mm with 76 parts on 124 nets, routed with 474 tracks and 60 vias.
It is built around the SS54 and XT60PW-M. Its parts include 23 resistors, 19 capacitors, 19 connectors, 9 ICs and 2 inductors.
本项目是胡萝卜收割机的电控部分内容主要包含以下内容
使用两个esp32配合5颗drv8825来实现功能控制

slaveboard&masterboard之间通过硬件串口2通信
用于控制机器底盘的运动。
用于控制机器步进电机和舵机的运动。
| Qty | Value | Footprint | References |
|---|---|---|---|
| 15 | 10k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R2, R3, R4, R5, R6, R7, R8, R9, R10, R11, R12, R13, R14, R15 |
| 5 | C_Polarized_Small | Capacitor_SMD:CP_Elec_6.3x7.7 | C1, C2, C3, C4, C5 |
| 5 | Conn_01x04 | MyConnector:CONN-TH_4P-P2.54-XH2.54-WO-4P | J6, J7, J8, J9, J10 |
| 5 | Conn_02x03_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_Vertical | J1, J2, J3, J4, J5 |
| 4 | 100nf | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C8, C9, C15, C16 |
| 4 | 220uf | Capacitor_SMD:CP_Elec_6.3x7.7 | C6, C11, C13, C19 |
| 3 | Conn_01x03 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J16, J17, J18 |
| 3 | Conn_01x04 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J12, J13, J14 |
| 2 | 200k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R16, R20 |
| 2 | 20k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R17, R21 |
| 2 | 4.7nf | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C12, C18 |
| 2 | 4.7uH | Inductor_SMD:L_Sumida_CDMC6D28_7.25x6.5mm | L1, L2 |
| 2 | 4.7uf | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C7, C14 |
| 2 | 47uf | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C10, C17 |
| 2 | TestPoint | TestPoint:TestPoint_Pad_D2.0mm | TP1, TP2 |
| 2 | esp_module | ProjectLibrary:esp_module | U1, U7 |
| 2 | std:5f48b54a4a9c4b9abe6e863ac7419a9f | ProjectLibrary:SCT2450 | U8, U9 |
| 1 | 10.2k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R23 |
| 1 | 10k | Potentiometer_THT:Potentiometer_Bourns_3296W_Vertical | RV1 |
| 1 | 15k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R18 |
| 1 | 3.3k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R19 |
| 1 | 31.6k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R24 |
| 1 | Conn_01x03 | MyConnector:CONN-TH_3P-P5.00_WJ500V-5.08-3P | J19 |
| 1 | Conn_01x08 | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Horizontal | J15 |
| 1 | SS54 | Diode_SMD:D_SMB_Handsoldering | D1 |
| 1 | XT60PW-M | MyConnector:AMASS_XT60PW-M | J11 |
| 1 | stepper1 | ProjectLibrary:stepper_motor | U2 |
| 1 | stepper2 | ProjectLibrary:stepper_motor | U3 |
| 1 | stepper3 | ProjectLibrary:stepper_motor | U4 |
| 1 | stepper4 | ProjectLibrary:stepper_motor | U5 |
| 1 | stepper5 | ProjectLibrary:stepper_motor | U6 |

bejaouihamza/bldc-foc-pcb
This open-source hardware project is a compact, single-board FOC (Field-Oriented Control) motor driver designed for precision robotics, drones, CNC machines, and automation systems.

BenjamimKrug/robo_humanoide
Repositorio para arquivos gerais necessários para o desenvolvimento do Robô humanoide





danielwilczak101/EasyControls
Originally part of the NASA Asteroid flyer program has been repurposed by the EPPL to allow anyone interested in controls to go online and connect with a real working device and test their own control algorithms on a…

IITB-Rocket-Team-Avionics/Ember
Experimental Flight Computer with potential mitigations of previous issues faced by FLYTE and a testbed for new systems.
It measures 85 × 95 mm and has 4 copper layers, 1.6 mm thick.
76 parts, built around the SS54 and XT60PW-M. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the ShaYJ555/harvester repository on GitHub, at the commit this page was made from: the board is hardware/machine_base_borad/machine_base_borad.kicad_pcb and its schematic hardware/machine_base_borad/machine_base_borad.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask ShaYJ555 before reusing the design.