

SMPS Breakout Board
- Size
- 60 × 40 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 27
- Nets
- 8
- Pads
- 92
- Tracks, vias
- 85, 153
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 7 May 2022
- Updated
- 4 Jun 2022
Overview
SMPS Breakout Board is an open-source printed circuit board by ScottGibb, from the ScottGibb/SMPS-Breakout-Board repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 60 × 40 mm with 27 parts on 8 nets, routed with 85 tracks and 153 vias.
It is built around the LM2596S-3.3. Its parts include 7 capacitors, 5 resistors, 5 connectors, 2 ICs and 2 diodes. It belongs with the interfaces and adapters and microcontroller boards boards of this library.
Main components
1Parts
27| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | MountingHole | MountingHole:MountingHole_3.5mm_Pad_Via | H1, H2, H3, H4 |
| 3 | 100nF | Capacitor_SMD:C_1206_3216Metric | C2, C5, C7 |
| 2 | 100K | Resistor_SMD:R_1206_3216Metric | R3, R4 |
| 2 | 10nF | Capacitor_SMD:C_1206_3216Metric | C3, C6 |
| 2 | Conn_01x02_Male | Connector_JST:JST_PH_B2B-PH-K_1x02_P2.00mm_Vertical | J2, J6 |
| 2 | Screw_Terminal_01x02 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2_1x02_P5.00mm_Horizontal | J1, J3 |
| 1 | 0.1 2W | Resistor_SMD:R_2512_6332Metric | R1 |
| 1 | 10K | Resistor_SMD:R_1206_3216Metric | R2 |
| 1 | 1N5821 | Diode_SMD:D_SMA | D1 |
| 1 | 220uF | Capacitor_SMD:CP_Elec_10x10.5 | C4 |
| 1 | 22uH | Inductor_SMD:L_12x12mm_H8mm | L1 |
| 1 | 330 | Resistor_SMD:R_1206_3216Metric | R5 |
| 1 | 680uF | Capacitor_SMD:CP_Elec_10x12.5 | C1 |
| 1 | Conn_01x03_Male | Connector_JST:JST_PH_B3B-PH-K_1x03_P2.00mm_Vertical | J4 |
| 1 | INA169 | Package_TO_SOT_SMD:SOT-23-5 | U2 |
| 1 | LED | LED_SMD:LED_1206_3216Metric | D2 |
| 1 | LM2596S-3.3 | Package_TO_SOT_SMD:TO-263-5_TabPin3 | U1 |
| 1 | LOGO | LOGO | G*** |
Similar boards
- 2 layers100 × 70 mm

- 2 layers100 × 80 mm

Meganecan gw
Barbedx/MeganeCAN
ESP32-based CAN-bus companion for Renault Megane 2 infotainment displays.
68 parts3 - 4 layers80 × 95 mm

Usb charging hub
hackclub/reflow
A YSWS for the northern hemisphere's summer and the aussie's winter. Run by @pmnlla, with love and loads of carrots.
214 parts2 - 4 layers149.5 × 113 mm

1. PDU
SshgurkiratSingh/CCMS_PORTAL
A full-stack smart streetlight fleet management system with real-time monitoring, remote control, and analytics.
111 parts2 - 2 layers140.3 × 98.7 mm

MEOW System Integration
andrewgond/M.E.O.W-Mealtime-Electronic-Observation-and-Weighing
M.E.O.W. automated pet feeder, a system that dispenses food and logs pet weight using load cells and RFID identification.
40 parts1Apache-2.0 - 2 layers50 × 50 mm

- 2 layers175 × 90 mm

Controller
Circuit-Digest/machine-vision-robotic-assembly-system
A machine vision-based robotic assembly system using the MechArm 270, NVIDIA Jetson Nano, and a custom ESP32 controller board for automated pick-and-place and miniature car assembly.
95 parts1MIT - 2 layers142.5 × 99 mm

Questions
How big is the SMPS Breakout Board PCB?
It measures 60 × 40 mm and has 2 copper layers, 1.6 mm thick.
What parts does the SMPS Breakout Board use?
27 parts, built around the LM2596S-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the SMPS Breakout Board KiCad files?
From the ScottGibb/SMPS-Breakout-Board repository on GitHub, at the commit this page was made from: the board is SMPS Breakout Board.kicad_pcb and its schematic SMPS Breakout Board.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the SMPS Breakout Board design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).