
Fully Differential
4ms/4ms-kicad-lib
libraries for KiCAD schematics and footprints

Four channel mixer for Eurorack (KiCad)
4ch Mixer is an open-source printed circuit board by Schenktronics, from the Schenktronics/ST04-quad-mixer repository on GitHub. It is a 2-layer board of 30 × 100 mm with 60 parts on 33 nets, routed with 292 tracks and 44 vias.
It is built around the TL074HID, TL072HID and MRA4003T3G-MS. Its parts include 23 resistors, 10 diodes, 8 capacitors, 7 connectors and 2 ICs. It belongs with the audio and music boards of this library.
A 6HP Eurorack four-channel active mixer from Schenktronics. Each channel has an input jack and a level knob that takes it from silent up to its own level. The four channels are summed into two outputs: a non-inverting mix (+) and an inverted one (-). Unplugged inputs are silent, so only the channels you patch affect the mix.
| Document | For | |
|---|---|---|
| User Manual | Using the module | |
| Assembly Guide | Building the kit | |
| Bill of Materials (CSV) | Parts and sourcing |
hardware/
ST-04_Quad Mixer.step 3D model of the assembled module
mixer/ Main PCB (KiCad 10)
4ch Mixer.kicad_sch Schematic
4ch Mixer.kicad_pcb PCB layout
4ch Mixer.step 3D model
lib/ Custom symbols and footprints
panel/ Faceplate (KiCad 10, made as an aluminum PCB)
4ch Mixer Faceplate.kicad_pcb Faceplate layout
4ch Mixer Faceplate.step 3D model
docs/ Manual, assembly guide, BOM, images
pdf/ PDF versions of the manual and assembly guideThe .github/ folder holds the automation that builds the PDFs. You can ignore it.
| Board | Size | Layers | Thickness | Notes |
|---|---|---|---|---|
| Main PCB | 30 x 100 mm | 2 | 1.6 mm | Standard green is fine. Surface-mount parts on the back. |
| Faceplate | 30 x 128.5 mm | 1 | 1.6 mm | Aluminum PCB, white solder mask, black silkscreen. Only the front copper layer is used, so FR4 works too. |
The BOM lists every part, including the surface-mount ones the kits ship with already soldered. The jack pads are oval so the board can also take panel-mount style jacks, which may be easier to source. The CUI MJ-3507 is one example: its sleeve is a solder lug rather than a pin, so each one needs a short wire from that lug to the jack's square pad.
This hardware design and its documentation are licensed under CC BY-NC-SA 4.0. See LICENSE.
The Schenktronics name and logo are trademarks of Schenktronics LLC and are not covered by the CC BY-NC-SA 4.0 license.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 13 | 10k | Resistor_SMD:R_0805_2012Metric | R1, R2, R3, R4, R9, R10, R11, R12, R13, R14, R15, R16, R17 |
| 8 | 1N4148 | Diode_SMD:D_SOD-323 | D3, D4, D5, D6, D7, D8, D9, D10 |
| 6 | 1k | Resistor_SMD:R_0805_2012Metric | R18, R19, R20, R21, R22, R23 |
| 6 | ~ | _NTSFootprints:Jack_3.5mm_QingPu_WQP-PJ398SM_Vertical_CenterHole_OvalPads | J1, J2, J3, J4, J5, J6 |
| 4 | 0 | Resistor_SMD:R_0805_2012Metric | R5, R6, R7, R8 |
| 4 | 0.1uf | Capacitor_SMD:C_0805_2012Metric | C1, C2, C3, C4 |
| 4 | 100k | _NTSFootprints:Potentiometer_Alps_RK09L_Plated_Mount_Holes | RV1, RV2, RV3, RV4 |
| 3 | Fiducial:Fiducial_1mm_Mask2mm | FID1, FID2, FID3 | |
| 2 | 10pf | Capacitor_SMD:C_0805_2012Metric | C7, C8 |
| 2 | 10uf | Capacitor_SMD:C_0805_2012Metric | C5, C6 |
| 2 | 200mA | Fuse:Fuse_1206_3216Metric | F1, F2 |
| 2 | MRA4003T3G | Diode_SMD:D_SMA | D1, D2 |
| 1 | LOGO | _NTSFootprints:SchentronicsLogoSmed | G*** |
| 1 | Power | _NTSFootprints:PinHeader_2x05_P2.54mm_Vertical_Shrouded | P1 |
| 1 | TL072H | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U2 |
| 1 | TL074H | Package_SO:SOIC-14_3.9x8.7mm_P1.27mm | U1 |

4ms/4ms-kicad-lib
libraries for KiCAD schematics and footprints



storskegg/opamp-tester
Single, Dual, and Quad OpAmp simple tester




It measures 30 × 100 mm and has 2 copper layers, 1.6 mm thick.
60 parts, built around the TL074HID, TL072HID and MRA4003T3G-MS. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Schenktronics/ST04-quad-mixer repository on GitHub, at the commit this page was made from: the board is hardware/mixer/4ch Mixer.kicad_pcb and its schematic hardware/mixer/4ch Mixer.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask Schenktronics before reusing the design.