Skip to the content
2 layers63.1 × 95 mmBUZZER, the printed circuit board in 3D

A PCB which buzzes!

Size
63.1 × 95 mm
Copper layers
2
Thickness
1.6 mm
Parts
24
Nets
25
Pads
78
Tracks, vias
140, 2
Pours
1
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
25 May 2026
Updated
28 May 2026

Overview

BUZZER is an open-source printed circuit board by Sash-Reek2010, from the Sash-Reek2010/The-Buzz repository on GitHub. It is a 2-layer board of 63.1 × 95 mm with 24 parts on 25 nets, routed with 140 tracks and 2 vias.

It is built around the NE556. Its parts include 6 capacitors, 2 resistors, 2 ICs and 1 connector.

Main components

1

README

README.md

The Buzz

The Buzz

A PCB which buzzes! You can change the tone and frequency using the potentiometers and make cool buzz combinations! It features the LM556 timer as the main IC here! The buzzers used here are passive piezo buzzers.

Schematic

The schematic is made in KiCAD!

Buzz 4

PCB

The PCB is also made in KiCAD!

Buzz 1 Buzz 2

PCB View & Render

Buzz 3 Render

Try it out!

KiCanvas Link

BOM

NameQuantity
Passive Piezo Buzzer10
10uF Capacitor2
10nF Capacitor2
100nF Capacitor1
100uF Capacitor1
LM556 IC1
USB A Connector1
10k Resistor2
10k Potentiometer2
CD4017 IC1

Thanks for Reading. - Sashreek!

Parts

24
QtyValueFootprintReferences
10BuzzerBuzzer_Beeper:Buzzer_12x9.5RM7.6BZ1, BZ2, BZ3, BZ4, BZ5, BZ6, BZ7, BZ8, BZ9, BZ10
210kPotentiometer_THT:Potentiometer_Bourns_3386P_VerticalRV1, RV2
210kResistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_HorizontalR2, R3
210nFCapacitor_THT:C_Disc_D8.0mm_W5.0mm_P5.00mmC3, C4
210uFCapacitor_THT:C_Disc_D8.0mm_W5.0mm_P5.00mmC1, C2
1100nFCapacitor_THT:C_Disc_D8.0mm_W5.0mm_P5.00mmC6
1100uFCapacitor_THT:C_Radial_D5.0mm_H11.0mm_P2.00mmC7
14017Package_DIP:DIP-16_W7.62mmU1
1LM556ser:DIL14IC1
1LOGOLOGO.
1USB_AConnector_USB:USB_A_Molex_67643_HorizontalJ1

Similar boards

  • 4 layers184.2 × 169.5 mmSB mini II, the printed circuit board in 3D

    SB mini II

    simonboak/SB-mini-II

    A homebrewed Apple II clone

    97 parts76MIT
  • 2 layers100 × 77.5 mmDiskII, the printed circuit board in 3D

    DiskII

    btb/DiskII

    An Apple Disk II controller clone using standard EPROMs

    35 parts71Apache-2.0
  • 2 layers100 × 77.5 mmSmartDiskII, the printed circuit board in 3D

    SmartDiskII

    btb/SmartDiskII

    An hybrid Disk ][ and SmartPort controller

    42 parts60Apache-2.0
  • 4 layers163 × 174.4 mmGd rev3b, the printed circuit board in 3D

    Gd rev3b

    baldengineer/Mega-IIe

    Using the Mega II from a IIgs to make a Apple IIe compatible computer: The Mega IIe!

    440 parts33MIT
  • 4 layers330.2 × 215.9 mmRetroii, the printed circuit board in 3D

    Retroii

    jonthomasson/retroii

    Retro ][ is a 6502 based computer based off of the Apple ][.

    302 parts33
  • 2 layers134.6 × 106.4 mmRenovation ssi 2001, the printed circuit board in 3D

    Renovation ssi 2001

    roybaer/renovation_ssi_2001

    Innovation SSI-2001 replica that can be built without vintage components

    95 parts26
  • 2 layers70.8 × 108.5 mmSequencer, the printed circuit board in 3D

    Sequencer

    sphawes/diySynth

    39 parts14
  • 2 layers88.9 × 63.5 mmAlpenglowSMTGarden, the printed circuit board in 3D

    AlpenglowSMTGarden

    AlpenglowIndustries/Alpenglow_SMTGarden_PCB

    A fun kit with lots of blinky lights and 555 timers that gives you lots of practice with different sizes of surface mount components

    155 parts11MIT

Questions

How big is the BUZZER PCB?

It measures 63.1 × 95 mm and has 2 copper layers, 1.6 mm thick.

What parts does the BUZZER use?

24 parts, built around the NE556. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the BUZZER KiCad files?

From the Sash-Reek2010/The-Buzz repository on GitHub, at the commit this page was made from: the board is Source/BUZZER.kicad_pcb and its schematic Source/BUZZER.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the BUZZER design in my own project?

Its repository states no licence, so its author keeps all rights: ask Sash-Reek2010 before reusing the design.