
RaffstoreController
Rhynaz/RaffstoreControlSystem
Web enabled relay board with hardware button support for easy smart home integration

Senior design project
Merged is an open-source printed circuit board by Samorales-03, from the Samorales-03/The_Cart_Buddy repository on GitHub, published under the MIT licence. It is a 2-layer board of 209.9 × 135.9 mm with 110 parts on 143 nets, routed with 957 tracks and 163 vias.
It is built around the CH340C, ESP32-S3-WROOM-1-N8 and LM2576T-3.3, with the LM2576T-5.0, L298N and L7805 among its other parts. Its parts include 26 capacitors, 16 resistors, 16 diodes, 16 connectors and 12 ICs. It belongs with the ESP32 and STM32 boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | 5006 | sams:KEYSTONE_5006 | TP1, TP2, TP3, TP4, TP5, TP6, TP7, TP8, TP9, TP10 |
| 8 | 0.1uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C18, C19, C21, C22, C23, C24, C25, C26 |
| 8 | ~ | Diode_SMD:D_0805_2012Metric | D3, D4, D5, D6, D7, D8, D9, D10 |
| 6 | 0.1uF | sams:K104K10X7RF5UH5_VIS | C2, C6, C7, C8, C9, C10 |
| 5 | 0Ohm | sams:RES_CRCW_0805_VIS-L | R1, R5, R6, R9, R10 |
| 4 | 10kOhm | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R2, R3, R7, R8 |
| 4 | ~ | MountingHole:MountingHole_2.5mm_Pad_Via | H1, H2, H3, H4 |
| 3 | 10uF | sams:CAP_FG18_TDK | C1, C4, C5 |
| 3 | Conn_02x03_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_Vertical | J4, J5, J16 |
| 3 | ESD | sams:CPDQ-L | U2, U3, U4 |
| 2 | 1N5820 | Diode_THT:D_DO-201AD_P15.24mm_Horizontal | D11, D12 |
| 2 | 220 uF | Motor Footys:CAP_PC_8X12_NCH | C11, C12 |
| 2 | 22uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C17, C20 |
| 2 | 5.1k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R13, R16 |
| 2 | BAT60JFILM | Diode_SMD:D_SOD-323_HandSoldering | D13, D15 |
| 2 | L101011MS02Q | 3.3 lib:SW_1MS02Q_CNK | SW1, SW2 |
| 2 | LED | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D14, D16 |
| 2 | SK102M025ST | 3.3 lib:SK102M025ST_CND | C14, C16 |
| 2 | SW | sams:SW_PTS645SK50SMTR92LFS | S3, S4 |
| 1 | 100k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R15 |
| 1 | 1N5819 | sams:CR_DO-41_SDS | D1 |
| 1 | 1k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R14 |
| 1 | 1uF | sams:CAPRB500W50L400T250H550 | C3 |
| 1 | 2kOhm | sams:STA_CF18_STP | R12 |
| 1 | 3kOhm | sams:STA_CF14_STP | R11 |
| 1 | 68Ohm | sams:RESC2012X60N | R4 |
| 1 | BJT | sams:SOT236 | U7 |
| 1 | CH340C | Package_SO:SOIC-16_3.9x9.9mm_P1.27mm | U6 |
| 1 | Conn_02x05_Odd_Even | Connector_IDC:IDC-Header_2x05_P2.54mm_Vertical | J17 |
| 1 | ECA-1HM471 | 3.3 lib:PCAP_10x20_PAN | C13 |
| 1 | ENA | Motor Footys:CON2_1X2_TUC_HTS_SAI | J10 |
| 1 | ENB | Motor Footys:CON2_1X2_TUC_HTS_SAI | J11 |
| 1 | ESP32-S3-WROOM-1-N8 | sams:ESP32-S3-WROOM-1_EXP | U1 |
| 1 | FerriteBead | Inductor_SMD:L_0805_2012Metric_Pad1.15x1.40mm_HandSolder | FB1 |
| 1 | GPIO Inputs | Motor Footys:CON4_1X4_TU_HTS_SAI | J12 |
| 1 | Jumper | Motor Footys:CON2_1X2_TUC_HTS_SAI | J9 |
| 1 | L298N | Motor Footys:Multiwatt15_V_STM | CR1 |
| 1 | L7805 | Package_TO_SOT_THT:TO-220-3_Vertical | U8 |
| 1 | LD1117S33TR_SOT223 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U11 |
| 1 | LDO | sams:SAMTEC_TS-103-T-A | J3 |
| 1 | LDO | sams:SOT-25_TOR-L | U5 |
| 1 | LED-red | sams:LED0805N_CML-L | D2 |
| 1 | LEFT | sams:61302211121 | J6 |
| 1 | LM2576T-3.3 | Package_TO_SOT_THT:TO-220-5_Vertical | U9 |
| 1 | LM2576T-5 | Package_TO_SOT_THT:TO-220-5_Vertical | U10 |
| 1 | Micro-USB | 3.3 lib:AMPHENOL_10103594-0001LF | J1 |
| 1 | Motor A | Motor Footys:CONN_OSTTC022162_OST | J13 |
| 1 | Motor B | Motor Footys:CONN_OSTTC022162_OST | J14 |
| 1 | ON | sams:SAMTEC_TS-103-T-A | J2 |
| 1 | PE-52626NL | 3.3 lib:IND_PE-526_LOWPROFILE_PUL | L1 |
| 1 | PE-52626NL | Library 5v:IND_PE-526_LOWPROFILE_PUL | L2 |
| 1 | RIGHT | sams:61302211121 | J7 |
| 1 | STM32F091R_B-C_Tx | Package_QFP:LQFP-64_10x10mm_P0.5mm | U12 |
| 1 | SW_Push | Button_Switch_SMD:SW_SPST_PTS645 | SW3 |
| 1 | Terminal_01x02 | Motor Footys:CONN_OSTTC022162_OST | J15 |
| 1 | UHE1H101MPD1TD | Library 5v:CAP_RN_8X11P5_NCH | C15 |
| 1 | fuse | sams:0ZCF_BEL | F1 |

Rhynaz/RaffstoreControlSystem
Web enabled relay board with hardware button support for easy smart home integration

TiboDevC/clockclock
Personal project of a kinetic clock inspired by Humans Since 1982, using 48 stepper motors to display time in an artistic and dynamic way.

ayaamghi/4C
4 Channel motor controller board for high voltage high amperage solutions. Integrated PID.

LJWsao/sinitsa
KiCAD files for the all band receiver. This can pick up strong local sources of RF such as AM and FM radio stations.



hack-a-tack/FPGA_Logic_Analyzer
(Info applies to rev. 1, update for later revisions (only final rev. matters in the README)) FPGA-based 8-channel logic analyzer implemented on iCE40UP5K.

Hakman482/fpga-power-quality-monitor
A complete hardware–FPGA–software prototype for real-time single-phase power-quality measurement, developed as an MSc Electronic & Electrical Engineering project.
It measures 209.9 × 135.9 mm and has 2 copper layers, 1.29 mm thick.
110 parts, built around the CH340C, ESP32-S3-WROOM-1-N8, LM2576T-3.3 and LM2576T-5.0. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Samorales-03/The_Cart_Buddy repository on GitHub, at the commit this page was made from: the board is merged.kicad_pcb and its schematic ESP32.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).