2 layers178.3 × 100.1 mm
4 layers112 × 52 mm
ESE RuizHerbelinAsfary
SamiAsfary/Project_ESE- Size
- 112 × 52 mm
- Copper layers
- 4
- Thickness
- 4.69 mm
- Parts
- 77
- Nets
- 96
- Pads
- 317
- Tracks, vias
- 653, 80
- Pours
- 5
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 28 Sep 2022
- Updated
- 1 Dec 2022
Overview
ESE RuizHerbelinAsfary is an open-source printed circuit board by SamiAsfary, from the SamiAsfary/Project_ESE repository on GitHub. It is a 4-layer board of 112 × 52 mm with 77 parts on 96 nets, routed with 653 tracks and 80 vias.
It is built around the ZXBM5210-S. Its parts include 18 connectors, 16 capacitors, 12 resistors, 5 ICs and 4 diodes. It belongs with the STM32 boards of this library.
Main components
1Parts
77| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | SolderJumper_2_Open | Jumper:SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mm | JP201, JP202, JP303, JP304, JP501, JP502, JP503, JP504, JP505, JP506, JP507, JP508 |
| 6 | 100nF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C303, C304, C305, C501, C502, C506 |
| 5 | 2k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R201, R202, R204, R205, R309 |
| 4 | Conn_01x05_Female | Connector_JST:JST_XH_B5B-XH-A_1x05_P2.50mm_Vertical | J205, J206, J207, J208 |
| 4 | MountingHole_Pad | MountingHole:MountingHole_3.2mm_M3_Pad_Via | H101, H102, H103, H104 |
| 3 | Conn_01x03_Female | Connector_JST:JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical | J203, J204, J503 |
| 2 | 1.1k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R306, R307 |
| 2 | 10pF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C306, C307 |
| 2 | 10uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C503, C504 |
| 2 | 1uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C403, C404 |
| 2 | Conn_01x06_Female | Connector_JST:JST_XH_B6B-XH-A_1x06_P2.50mm_Vertical | J501, J502 |
| 2 | Conn_01x07_Female | Connector_JST:JST_XH_B7B-XH-A_1x07_P2.50mm_Vertical | J201, J202 |
| 2 | I2C1 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J101, J104 |
| 2 | MTRX_test | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J102, J105 |
| 2 | ZXBM5210-S | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U501, U502 |
| 1 | 1.7k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R305 |
| 1 | 10R | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R303 |
| 1 | 10k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R501 |
| 1 | 10uF | Capacitor_THT:C_Radial_D5.0mm_H5.0mm_P2.00mm | C401 |
| 1 | 16MHz | Crystal:Crystal_SMD_EuroQuartz_MT-4Pin_3.2x2.5mm | Y301 |
| 1 | 1A11-NF5STSE-B | kicad:1A11-NF5STSE-B | S401 |
| 1 | 1uF | Capacitor_THT:C_Radial_D5.0mm_H5.0mm_P2.00mm | C505 |
| 1 | 2.4k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R304 |
| 1 | 22uF | Capacitor_THT:C_Radial_D5.0mm_H5.0mm_P2.00mm | C402 |
| 1 | 4.7uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C302 |
| 1 | 6.5k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R308 |
| 1 | 600R@100MHz | Inductor_SMD:L_0805_2012Metric_Pad1.05x1.20mm_HandSolder | L301 |
| 1 | AZ1117_Reg5V | kicad:SOT230P700X180-4N | U401 |
| 1 | Blue | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D301 |
| 1 | Conn_01x02_Female | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J401 |
| 1 | Conn_02x07_Odd_Even | Connector_PinHeader_1.27mm:PinHeader_2x07_P1.27mm_Vertical_SMD | J301 |
| 1 | Green | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D304 |
| 1 | LOGO | kicad:bonk | |
| 1 | LOGO | kicad:logoEnsea | |
| 1 | MIC5317_Reg3V | SOT95P280X145-5N:SOT95P280X145-5N | U402 |
| 1 | Red | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D302 |
| 1 | STM32G070RBTx | kicad:QFP50P1200X1200X160-64N | U301 |
| 1 | SW_MEC_5E | kicad:SWITCH_43SMTR92LFS | SW301 |
| 1 | UART3 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J103 |
| 1 | Yellow | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D303 |
Similar boards
- 2 layers83 × 71 mm
- 4 layers112 × 52 mm
Beerator
Artpel1805/Beerator
Le but du projet est de réaliser intégralement un robot capable de se déplacer, de chercher et d’attraper une canette (de bière ? 😶), relever sa couleur, puis de la déposer dans la zone de couleur correspondante.
56 parts2 - 2 layers87.6 × 83.8 mm
ENEL200Group01
cva68/ESPBreadboardRobot
Peripheral and breakout board for the ESP-32, with firmware designed for use with Microsoft MakeCode
88 parts2MIT - 2 layers36.8 × 69.2 mm
- 4 layers110 × 50 mm
Projet robot ESE
Groupe-Projet-ESE/BeerRobot
Chelsea COMLAN - Alix HAVRET - Loïcia KOEHL - Quentin SIMON
68 parts - 4 layers113.1 × 57 mm
- 4 layers90 × 70 mm
Kyttiludzinator
Lazorme/Ludz-le-chat
The Lidar and motor drivers are in drvLIDAR and drvMotor, respectively.
116 parts
Questions
How big is the ESE RuizHerbelinAsfary PCB?
It measures 112 × 52 mm and has 4 copper layers, 4.69 mm thick.
What parts does the ESE RuizHerbelinAsfary use?
77 parts, built around the ZXBM5210-S. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the ESE RuizHerbelinAsfary KiCad files?
From the SamiAsfary/Project_ESE repository on GitHub, at the commit this page was made from: the board is Electronics/ESE_RuizHerbelinAsfary/ESE_RuizHerbelinAsfary.kicad_pcb and its schematic Electronics/ESE_RuizHerbelinAsfary/Actuator.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the ESE RuizHerbelinAsfary design in my own project?
Its repository states no licence, so its author keeps all rights: ask SamiAsfary before reusing the design.