
Main panel
google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards

It's a macro pad with LEDS, volume slider, Oled and 9 keys using a cool matrix system. Diodes too!
MacroPad is an open-source printed circuit board by SSLTunezz, from the SSLTunezz/Beesta-pad repository on GitHub. It is a 2-layer board of 100 × 85.2 mm with 34 parts on 33 nets, routed with 366 tracks and 60 vias.
It is built around the SK6812MINI-E and PTA3043-2010CPB103. Its parts include 18 diodes, 9 switches, 3 resistors and 2 ICs. It belongs with the keyboards and input and lEDs and displays boards of this library.
It's a macropad/hackpad that has 9 keys, 9 diodes, an OLED screen, a slide potentiometer and an XIOA RP2040 and most importantly LEDS YAYAYAY !
Big thanks to: Simon for helping me out alot on kicad
The hackpad guide, a great starting place
How did this start? Well it started off with my friend who made a really cool split keyboard so I was like "I wanna make one too!" expect everwhere I went, all the websites said "THIS IS AN ADVANCED PROJECT, DO SMTH SIMPLER" so a macro pad was a perfect starting step!
What softwares did I use? I used KICAD for PCB making and Schematics. I used ONSHAPE for the designing of the case I used SnapMagic (website) to find parts and footprints I used alot of help from helpfull people :)
Components
Switches and Diodes: This macropad uses a matrix system becuase it has 9 keys. What's a matrix system? Well I'm glad you asked: A matrix system is simply a more efficent way of wiring up the keys. Normally each switch requires thier own pin, but as you can imagine, at some point you run out of pins on your microcontroller, hence a matrix system basically optimizes this and for 9 keys, you only need 6 pins, for 16 keys you only need 8 pins, etc...
Potentiometer: It also has a slide potentiometer, which I intend to use for volume control but do as you will! It can also be used for anything really.
Screens: The OLED screen is for bongo cat or maybe another software I plan to implement later. One key thing I learned from wiring the OLED up is that the SDA AND SCL actually have co responding pins on the XIAO or else it won't work
Onshape Case: I designed a onshape case to hold everythign together, it's not final yet but It looks really cool and also has some clear parts so you can see the diodes Some Pictures of the schematics, pcb and Case
Drawings: I also made silkscreen drawings cause that was so fun! I tried to make different versions or Orpheus but I'm not to sure how good it looks...
Challenges and Whatnot: Some challenged I faced while making this macro pad was the fact that this was my first time touching KICAD and making an electronics project like this. I learned how to kicad schematic, pcb and so much other cool stuff!
A challenge I faced, was I coudn't rap my head around the fact that the Leds would be under the board but after some pictures I understood.
A MASSIVE life changed were VIA'S. I never knew they existed until my friend told me about them and they were sooooooooo usefull, it made everything much simpler.
I also learned how to import 3d models into KICAD (pro tip: It's very hard). It was super hard cause I would import them but then when exporting eveythign they would despawn which was not usefull as I needed them for the case. Apperantly you have to link global models and KICAD expects a folder that isn't made so you have to go into package contents and make the folder it wants etc... But it was very rewarding for my export to finally include the 3d models.
Pictures:
Schematics:
PCB:
Case: (The open components will have a see through plastic/glassy material over it.
Finally here is the Bill of Materials: You can order from whichever websites are cheaper for you, understand that some manufactures were choosen not for item price, but shipping.
To print: Print both stl files
| Qty | Value | Footprint | References |
|---|---|---|---|
| 9 | 1N4148 | Diode_THT:D_DO-35_SOD27_P7.62mm_Horizontal | D1, D2, D3, D4, D5, D6, D7, D8, D9 |
| 9 | SK6812MINI-E | LED_SMD:LED_SK6812MINI-E_3.2x2.8mm_P1.5mm_ReverseMount | D10, D11, D12, D13, D14, D15, D16, D17, D18 |
| 9 | SW_Push | Button_Switch_Keyboard:SW_Cherry_MX_1.00u_PCB | SW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8, SW9 |
| 2 | 500 | Resistor_SMD:R_0805_2012Metric | R2, R3 |
| 2 | LOGO | LOGO | G***, G*** |
| 1 | ER_OLEDM0.91_1x-I2C | Display:ER_OLEDM0.91_1x-I2C | U2 |
| 1 | MOUDLE-SEEEDUINO-XIAO | footprints:XIAO-Generic-Hybrid-14P-2.54-21X17.8MM | U1 |
| 1 | PTA3043-2010CPB103 | PTA3043-2010CPB103:TRIM_PTA3043-2010CPB103 | R1 |

google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards

Bastardkb/Dilemma
The Dilemma is a vertical stagger low-profile keyboard with mods.

Pwnsat/FlatSat
Flatsat v1.0 is a hardware based platform for aerospace cybersecurity research

adamws/kicad-kbplacer
KiCad plugin for automatic keyboard's key placement and routing

imchipwood/dumbpad
Simple 4x4 numpad with rotary encoder. Powered by QMK via ATmega32u4 Pro Micro

makerforgetech/modular-biped
An open source framework for creating a bipedal modular companion robot.


It measures 100 × 85.2 mm and has 2 copper layers, 1.6 mm thick.
34 parts, built around the SK6812MINI-E and PTA3043-2010CPB103. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the SSLTunezz/Beesta-pad repository on GitHub, at the commit this page was made from: the board is MacroPad.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask SSLTunezz before reusing the design.