Skip to the content
2 layers80 × 80 mmInterfaceboard, the printed circuit board in 3D

Repository for 1st semester project of Master in Electronics relating to driving an electric go-kart.

Size
80 × 80 mm
Copper layers
2
Thickness
1.6 mm
Parts
64
Nets
38
Pads
170
Tracks, vias
201, 167
Pours
2
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
16 Feb 2021
Updated
6 Jun 2021

Overview

Interfaceboard is an open-source printed circuit board by SR-Madsen, from the SR-Madsen/ElectricGoKart repository on GitHub. It is a 2-layer board of 80 × 80 mm with 64 parts on 38 nets, routed with 201 tracks and 167 vias.

It is built around the AD8420ARMZ, TSW-105-07-T-D and 150060SS75000, with the 150060VS75000, LM4041CFTA and PTS645 among its other parts. Its parts include 23 resistors, 17 capacitors, 6 diodes, 4 connectors and 3 ICs.

Main components

6

README

README.md

Electric Go-Kart

Repository for 1st semester project of the Master in Electronics at the University of Southern Denmark relating to controlling a Permanent-Magnet Synchronous Motor for an electric go-kart.

Purpose

The repository contains KiCad files and programming files from Vivado and the Xilinx SDK used for designing a three-phase inverter with a Zybo Zynq-7010 processing unit as core. As described within the repository, a system already exists that the inverter must fit within.

Overview

Parts

64
QtyValueFootprintReferences
6TestPointTestPoint:TestPoint_Plated_Hole_D2.0mmTP4, TP5, TP6, TP7, TP8, TP9
5100nCapacitor_SMD:C_0603_1608MetricC1, C5, C6, C10, C15
4100pCapacitor_SMD:C_0603_1608MetricC2, C4, C7, C9
420kResistor_SMD:R_0603_1608MetricR1, R3, R7, R9
4TSW-105-07-T-DElectricGoKart:TSW-105-07-T-DJ301, J302, J304, J305
310µCapacitor_SMD:C_0805_2012MetricC11, C13, C14
210kResistor_SMD:R_0603_1608MetricR19, R24
21nCapacitor_SMD:C_0603_1608MetricC3, C8
2270Resistor_SMD:R_0603_1608MetricR21, R22
23.09Resistor_SMD:R_0603_1608MetricR5, R11
2400 mA, 1k5Inductor_SMD:L_0805_2012MetricFB1, FB2
25 VDiode_SMD:D_SOD-523D1, D2
254.9Resistor_SMD:R_1210_3225MetricR2, R8
256Resistor_SMD:R_1210_3225MetricR4, R10
27.5kResistor_SMD:R_0603_1608MetricR16, R17
2AD8420ARMZElectricGoKart:AD8420ARMZU1, U2
2DNPResistor_SMD:R_0603_1608MetricR6, R12
2M3 MountMountingHole:MountingHole_3.2mm_M3H1, H2
11.43kResistor_SMD:R_0603_1608MetricR14
111.5kResistor_SMD:R_0603_1608MetricR15
1147Resistor_SMD:R_0603_1608MetricR18
1150060SS75000LED_SMD:LED_0603_1608MetricD5
1150060VS75000LED_SMD:LED_0603_1608MetricD6
11kResistor_SMD:R_0603_1608MetricR20
13.3 VDiode_SMD:D_SOD-523D3
130nCapacitor_SMD:C_0603_1608MetricC16
133nCapacitor_SMD:C_0603_1608MetricC17
15.1kResistor_SMD:R_0603_1608MetricR13
156nCapacitor_SMD:C_0603_1608MetricC18
1LM4041CFTAElectricGoKart:LM4041D4
1MCP6L01x-xOTPackage_TO_SOT_SMD:SOT-23-5U3
1PTS645Button_Switch_SMD:SW_SPST_PTS645SW1

More from SR-Madsen/ElectricGoKart

2
  • 2 layers200 × 71.9 mmDc link, the printed circuit board in 3D

    Dc link

    SR-Madsen/ElectricGoKart

    Repository for 1st semester project of Master in Electronics relating to driving an electric go-kart.

    55 parts1
  • 2 layers66 × 71.8 mmInverter, the printed circuit board in 3D

    Inverter

    SR-Madsen/ElectricGoKart

    Repository for 1st semester project of Master in Electronics relating to driving an electric go-kart.

    54 parts1

Similar boards

  • 4 layers223.5 × 147.3 mmAmp board, the printed circuit board in 3D

    Amp board

    Alex-Wolfe/Home-Audio-System

    Audio Receiver and Amplifier

    760 parts1
  • 8 layers55 × 40 mmHomebrew ECP5-SBC, the printed circuit board in 3D

    Homebrew ECP5-SBC

    mikegoelzer/Homebrew-ECP5-SBC

    Kicad files for homebrew hobbyist computer with custom RISC-V CPU

    106 parts
  • 4 layers97.2 × 82.7 mmPlainDAQ v01, the printed circuit board in 3D

    PlainDAQ v01

    AlperenAkkuncu/PlainDAQ

    An Open Source DAQ module for Raspberry Pi Pico

    90 parts208
  • 6 layers80 × 98 mmMinibot V1, the printed circuit board in 3D

    Minibot V1

    RIVeR-Lab/BOOST

    Multi-Agent Mission Concept for Battery Optimized Onsite Swapping Technology (BOOST)

    101 parts3MIT
  • 4 layers50 × 56 mmRadar synth, the printed circuit board in 3D

    Radar synth

    sigma0us/radar-synth

    Dual PLL radar transmitter, design for prototyping

    87 parts
  • 4 layers80 × 72 mmConvertisseur DC DC, the printed circuit board in 3D

    Convertisseur DC DC

    SurquinMathieu/buck-boost-converter

    4-switch buck-boost DC/DC converter

    88 parts
  • 2 layers64.5 × 95.5 mmInterposer, the printed circuit board in 3D

    Interposer

    kaybarkbark/gbpunk

    RP2040 Based Gameboy Flash Cart

    9 parts1
  • 4 layers94 × 50.8 mmUlx3s, the printed circuit board in 3D

    Ulx3s

    drandyhaas/KiCadRoutingTools

    A set of Python/Rust tools to aid routing in KiCad

    235 parts744MIT

Questions

How big is the Interfaceboard PCB?

It measures 80 × 80 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Interfaceboard use?

64 parts, built around the AD8420ARMZ, TSW-105-07-T-D, 150060SS75000 and 150060VS75000. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Interfaceboard KiCad files?

From the SR-Madsen/ElectricGoKart repository on GitHub, at the commit this page was made from: the board is PCBs/Interfaceboard/Interfaceboard.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Interfaceboard design in my own project?

Its repository states no licence, so its author keeps all rights: ask SR-Madsen before reusing the design.