2 layers79.9 × 41.4 mm
GR ESP32-A1S
GadgetReboot/ESP32-A1S
Breakout PCB for the ESP32-A1S module including an audio amp and basic GPIO headers, USB interface
65 parts27
2 layers70.9 × 25.1 mm
Simple headphones dac
SL-RU/simple_headphones_dacSimple board with DAC cs4335 and amplifier TDA2822
- Size
- 70.9 × 25.1 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 26
- Nets
- 25
- Pads
- 78
- Tracks, vias
- 143, 0
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 2 Aug 2016
- Updated
- 16 Aug 2016
Overview
Simple headphones dac is an open-source printed circuit board by SL-RU, from the SL-RU/simple_headphones_dac repository on GitHub. It is a 2-layer board of 70.9 × 25.1 mm with 26 parts on 25 nets, routed with 143 tracks and 0 vias.
It is built around the CS4335-KSZ and TDA2822D. Its parts include 13 capacitors, 8 resistors, 3 ICs and 2 connectors. It belongs with the audio and music boards of this library.
Main components
2Parts
26| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 100uF | Capacitors_ThroughHole:C_Radial_D6.3_L11.2_P2.5 | C7, C8, C10, C11 |
| 2 | 100nF | Capacitors_SMD:C_0402 | C12, C13 |
| 2 | 10nF | Capacitors_SMD:C_0805_HandSoldering | C5, C6 |
| 2 | 22k | Resistors_SMD:R_0603_HandSoldering | R5, R6 |
| 2 | 240k | Resistors_SMD:R_0603_HandSoldering | R1, R2 |
| 2 | 3.3uF | Capacitors_SMD:C_0805_HandSoldering | C3, C4 |
| 2 | 4.7 | Resistors_SMD:R_0603_HandSoldering | R7, R8 |
| 2 | 560 | Resistors_SMD:R_0603_HandSoldering | R3, R4 |
| 1 | 0.1uF | Capacitors_SMD:C_0402 | C2 |
| 1 | 10uF | Capacitors_ThroughHole:C_Radial_D5_L11_P2 | C9 |
| 1 | 1uF | Capacitors_SMD:C_0805_HandSoldering | C1 |
| 1 | CONN_01X07 | Pin_Headers:Pin_Header_Straight_1x07 | P1 |
| 1 | CS4335 | Housings_SOIC:SOIC-8_3.9x4.9mm_Pitch1.27mm | U1 |
| 1 | PJ-320_3.5_jack | simple_headphones_dac:PJ-320E | U3 |
| 1 | TDA2822 | Power_Integrations:SO-8 | U2 |
| 1 | resistor | Pin_Headers:Pin_Header_Straight_2x03 | P2 |
Similar boards
- 4 layers147.8 × 65 mm
Prius gen2
ksmola/PriusG2
Inverter control board for Toyota Prius Gen 2 (XW20) inverter. Some of the schematics are based on Johannes Huebner's work found here. Running openinverter firmware.
149 parts3 - 2 layers80 × 74 mm
Hubble metal detector
zartarn15/hubble-metal-detector
STM32-based digital metal detector with custom hardware and embedded DSP firmware.
156 parts2 - 2 layers79.7 × 80 mm
Mainboardv1.2
doobedoobedo/Huebner_Inverter
KiCAD port of https://github.com/jsphuebner/inverter-hardware mainboard V1.2
133 parts1 - 2 layers57 × 31 mm
Sega gamegear audio original
OpenRetroHQ/sega-gamegear-audio-original
Sega Game Gear Audio Original - Remake of the original TDA2882M audio board for the game gear
22 parts1 - 2 layers86.3 × 41 mm
- 2 layers100 × 63 mm
- 2 layers100 × 100 mm
Questions
How big is the Simple headphones dac PCB?
It measures 70.9 × 25.1 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Simple headphones dac use?
26 parts, built around the CS4335-KSZ and TDA2822D. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Simple headphones dac KiCad files?
From the SL-RU/simple_headphones_dac repository on GitHub, at the commit this page was made from: the board is simple_headphones_dac.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Simple headphones dac design in my own project?
Its repository states no licence, so its author keeps all rights: ask SL-RU before reusing the design.