Runcey/rp2040-crPayload PCB designed for UAVs@Berkeley
Rp2040 chute release is an open-source printed circuit board by Runcey, from the Runcey/rp2040-cr repository on GitHub. It is a 2-layer board of 30.8 × 42.7 mm with 60 parts on 67 nets, routed with 569 tracks and 131 vias.
It is built around the RP2040, BMP280 and W25Q128JVSIQ, with the ME6211C33M5G-N, TP4057-42-SOT26-R and USBLC6-2P6 among its other parts. Its parts include 20 capacitors, 17 resistors, 6 ICs, 6 diodes and 4 connectors. It belongs with the RP2040 boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | 100n | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C1, C2, C3, C4, C5, C6, C7, C8, C9, C11, C12, C14 |
| 7 | 10k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R3, R4, R7, R11, R14, R16, R17 |
| 6 | 1k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R5, R6, R12, R13, R15, R18 |
| 3 | 10u | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C17, C18, C19 |
| 3 | 1u | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C10, C13, C20 |
| 3 | TestPoint | TestPoint:TestPoint_Pad_D1.0mm | TP1, TP2, TP3 |
| 2 | 20p | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C15, C16 |
| 2 | 27.4 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R8, R9 |
| 2 | 5.1k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R2 |
| 2 | D | Diode_SMD:D_SOD-323_HandSoldering | D3, D4 |
| 1 | ARM | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D1 |
| 1 | BMP280 | Package_LGA:Bosch_LGA-8_2x2.5mm_P0.65mm_ClockwisePinNumbering | U2 |
| 1 | Boot | Button_Switch_SMD:SW_SPST_B3U-1000P | SW1 |
| 1 | CHRG | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D5 |
| 1 | Conn_01x02_Pin | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J2 |
| 1 | Conn_01x03_Pin | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J4 |
| 1 | JST_PH | Connector_JST:JST_PH_S2B-PH-SM4-TB_1x02-1MP_P2.00mm_Horizontal | J3 |
| 1 | LOGO | LOGO | G*** |
| 1 | ME6211C33M5G-N | Package_TO_SOT_SMD:SOT-23-5 | U5 |
| 1 | REL | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D2 |
| 1 | RP2040 | Package_DFN_QFN:QFN-56-1EP_7x7mm_P0.4mm_EP3.2x3.2mm | U1 |
| 1 | Reset | Button_Switch_SMD:SW_SPST_B3U-1000P | SW2 |
| 1 | STDBY | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D6 |
| 1 | TP4057-42-SOT26-R | Package_TO_SOT_SMD:SOT-23-6 | U6 |
| 1 | USBLC6-2P6 | Package_TO_SOT_SMD:SOT-666 | U3 |
| 1 | USB_C_Receptacle_USB2.0_16P | Connector_USB:USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J1 |
| 1 | W25Q128JVS | Package_SO:SOIC-8_5.23x5.23mm_P1.27mm | U4 |
| 1 | X322512MSB4SI | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
martinberlin/Sharp-LV
This KiCad board aims to be a low consumption driver for SHARP LCDs w/optional touch. MCU: Nordic RF52 (not tested) | ESP32S3 buy one in Tindie before sending to production
SpacehuhnTech/USB-Nova-MkII-PCB
USB Nova is a cute little USB “drive” that acts as a keyboard, much like the USB Rubber Ducky, WiFi Duck, and other BadUSBs.
BradleyConn/bc_flight_computer
Thrust Vector Controlled Rocket Flight Computer Utilizing RP2040 MCU
openconcepts-ar/accel2d
This project aims to provide a graphics server system based on hardware accelerated graphics, and a easy way to develop the graphics primitives.
OpenJBOD/rp2040
This repository contains the hardware design files OpenJBOD RP2040 Baseboard.
It measures 30.8 × 42.7 mm and has 2 copper layers, 1.6 mm thick.
60 parts, built around the RP2040, BMP280, W25Q128JVSIQ and ME6211C33M5G-N. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Runcey/rp2040-cr repository on GitHub, at the commit this page was made from: the board is rp2040 chute release.kicad_pcb and its schematic rp2040 chute release.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask Runcey before reusing the design.