
Jlctest
cjheath/jlcbasic
JLC Basic parts library for Kicad fetched and converted from EasyEDA

The Steam Punk Transmitter
TheSPT v2 is an open-source printed circuit board by RomualdRousseau, from the RomualdRousseau/TheSPT repository on GitHub. It is a 4-layer board of 133 × 73 mm with 62 parts on 49 nets, routed with 500 tracks and 195 vias.
It is built around the ATMEGA1284P-AU, AMS1117-3.3 and AMS1117-5.0, with the B5819W among its other parts. Its parts include 20 resistors, 15 connectors, 12 capacitors, 4 ICs and 1 diode. It belongs with the AVR (ATmega, ATtiny) boards of this library.
The Steam Punk RC Transmitter
| Qty | Value | Footprint | References |
|---|---|---|---|
| 16 | 10K | Resistor_SMD:R_0603_1608Metric | R1, R4, R5, R6, R7, R10, R11, R12, R13, R14, R15, R16, R17, R18, R19, R20 |
| 4 | 100nF | Capacitor_SMD:C_0603_1608Metric | C2, C8, C11, C12 |
| 4 | MountingHole_Pad | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3, H4 |
| 2 | 100 @ 100MHz | Inductor_SMD:L_0805_2012Metric | FB1, FB2 |
| 2 | 10uF | Capacitor_SMD:C_0805_2012Metric | C6, C7 |
| 2 | 22pF | Capacitor_SMD:C_0603_1608Metric | C1, C3 |
| 2 | 22uF | Capacitor_SMD:C_0805_2012Metric | C9, C10 |
| 1 | 100K | Resistor_SMD:R_0603_1608Metric | R9 |
| 1 | 10nF | Capacitor_SMD:C_0603_1608Metric | C4 |
| 1 | 10uF | Capacitor_SMD:C_0603_1608Metric | C5 |
| 1 | 16MHz | Crystal:Crystal_SMD_0603-2Pin_6.0x3.5mm | Y1 |
| 1 | 180K | Resistor_SMD:R_0603_1608Metric | R8 |
| 1 | 1M | Resistor_SMD:R_0603_1608Metric | R3 |
| 1 | 220 | Resistor_SMD:R_0603_1608Metric | R2 |
| 1 | 500mA | Fuse:Fuse_0603_1608Metric | F1 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U2 |
| 1 | AMS1117-5.0 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U1 |
| 1 | ATmega1284P-AU | Package_QFP:TQFP-44_10x10mm_P0.8mm | U3 |
| 1 | AUX1 | Connector_Molex:Molex_PicoBlade_53261-0371_1x03-1MP_P1.25mm_Horizontal | J4 |
| 1 | AUX2 | Connector_Molex:Molex_PicoBlade_53261-0271_1x02-1MP_P1.25mm_Horizontal | J1 |
| 1 | AUX3 | Connector_Molex:Molex_PicoBlade_53261-0371_1x03-1MP_P1.25mm_Horizontal | J5 |
| 1 | AUX4 | Connector_Molex:Molex_PicoBlade_53261-0271_1x02-1MP_P1.25mm_Horizontal | J7 |
| 1 | B5819W | Diode_SMD:D_0603_1608Metric | D1 |
| 1 | BAT/SW/LED | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J2 |
| 1 | FC-111 | Logic_LevelTranslator:FC-111 | U4 |
| 1 | FTDI | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J12 |
| 1 | I2C | Connector_Molex:Molex_PicoBlade_53261-0871_1x08-1MP_P1.25mm_Horizontal | J15 |
| 1 | ICSP | Connector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_Vertical | J13 |
| 1 | JS0 | Connector_Molex:Molex_PicoBlade_53261-1271_1x12-1MP_P1.25mm_Horizontal | J10 |
| 1 | JS1 | Connector_Molex:Molex_PicoBlade_53261-1271_1x12-1MP_P1.25mm_Horizontal | J14 |
| 1 | KB1 | Connector_Molex:Molex_PicoBlade_53261-0371_1x03-1MP_P1.25mm_Horizontal | J6 |
| 1 | LCD | Connector_Molex:Molex_PicoBlade_53261-0471_1x04-1MP_P1.25mm_Horizontal | J11 |
| 1 | LOGO | Logos:SmallCow | XiaoNiuNiu |
| 1 | MicroSD | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J8 |
| 1 | PPM | Connector_Molex:Molex_PicoBlade_53261-0571_1x05-1MP_P1.25mm_Horizontal | J9 |
| 1 | SEL | Connector_Molex:Molex_PicoBlade_53261-0271_1x02-1MP_P1.25mm_Horizontal | J3 |
| 1 | SW_Push | Button_Switch_SMD:SW_SPST_PTS645 | SW1 |

cjheath/jlcbasic
JLC Basic parts library for Kicad fetched and converted from EasyEDA



tadzio8425/Micromouse
Micromouse developed by the IEEE Robotics and Automation Society chapter of the Universidad de Los Andes, Bogotá (2023-2024).

NarodniySputnik/Gladiolus-1
Gladiolus-1 - автономный модуль для приема и передачи изображений в формате SSTV (Slow Scan TeleVision) на малом космическом аппарате (МКА) формата CubeSat



DerSpatz/PCB-reflow-solder-heat-plate
hardware design for a PCB reflow solder heat plate
It measures 133 × 73 mm and has 4 copper layers, 1.6 mm thick.
62 parts, built around the ATMEGA1284P-AU, AMS1117-3.3, AMS1117-5.0 and B5819W. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the RomualdRousseau/TheSPT repository on GitHub, at the commit this page was made from: the board is Hardware/TheSPT_v2/TheSPT_v2.kicad_pcb and its schematic Hardware/TheSPT_v2/TheSPT_v2.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask RomualdRousseau before reusing the design.