Skip to the content
2 layers41 × 30 mmTerminalBoard, the printed circuit board in 3D

A collection of circuit designs for various MCUs, not just Raspberry Pis relating to Model Railroading

Size
41 × 30 mm
Copper layers
2
Thickness
1.6 mm
Parts
6
Nets
9
Pads
22
Tracks, vias
10, 0
Routed
Yes
KiCad
KiCad 3
Created
18 Dec 2016
Updated
18 Jan 2026

Overview

TerminalBoard is an open-source printed circuit board by RobertPHeller, from the RobertPHeller/RPi-RRCircuits repository on GitHub. It is a 2-layer board of 41 × 30 mm with 6 parts on 9 nets, routed with 10 tracks and 0 vias.

It belongs with the ESP32 boards of this library.

README

16LEDDriver23017SMD/README.md

16LEDDriver23017SMD

This is a SMD variant of 16DriverOutputHAT.

Parts

6
QtyValueFootprintReferences
4RPi_Hat:RPi_Hat_Mounting_HoleH1, H2, H3, H4
1CableSIL-9T0
1SignalSIL-9SIL-9

More from RobertPHeller/RPi-RRCircuits

12
  • 2 layers156.2 × 168.9 mmLPC176x MultiFunction, the printed circuit board in 3D

    LPC176x MultiFunction

    RobertPHeller/RPi-RRCircuits

    A collection of circuit designs for various MCUs, not just Raspberry Pis relating to Model Railroading

    236 parts24
  • 2 layers185.4 × 73.7 mmFullInterlockingPlantCANPower, the printed circuit board in 3D

    FullInterlockingPlantCANPower

    RobertPHeller/RPi-RRCircuits

    A collection of circuit designs for various MCUs, not just Raspberry Pis relating to Model Railroading

    155 parts24
  • 2 layers185.4 × 73.7 mmFullInterlockingPlantCAN, the printed circuit board in 3D

    FullInterlockingPlantCAN

    RobertPHeller/RPi-RRCircuits

    A collection of circuit designs for various MCUs, not just Raspberry Pis relating to Model Railroading

    154 parts24
  • 2 layers137.2 × 73.7 mmFullInterlockingPlant, the printed circuit board in 3D

    FullInterlockingPlant

    RobertPHeller/RPi-RRCircuits

    A collection of circuit designs for various MCUs, not just Raspberry Pis relating to Model Railroading

    128 parts24
  • 2 layers128.3 × 139.7 mmPocketBeagleMultifuntion, the printed circuit board in 3D

    PocketBeagleMultifuntion

    RobertPHeller/RPi-RRCircuits

    A collection of circuit designs for various MCUs, not just Raspberry Pis relating to Model Railroading

    124 parts24
  • 2 layers141 × 146.1 mmLPC1758-MultiIOBoard, the printed circuit board in 3D

    LPC1758-MultiIOBoard

    RobertPHeller/RPi-RRCircuits

    A collection of circuit designs for various MCUs, not just Raspberry Pis relating to Model Railroading

    119 parts24
  • 2 layers141 × 146 mmLPC1768-MultiIOBoard, the printed circuit board in 3D

    LPC1768-MultiIOBoard

    RobertPHeller/RPi-RRCircuits

    A collection of circuit designs for various MCUs, not just Raspberry Pis relating to Model Railroading

    119 parts24
  • 2 layers76.2 × 153.7 mmTivaMultiFunctionBoard, the printed circuit board in 3D

    TivaMultiFunctionBoard

    RobertPHeller/RPi-RRCircuits

    A collection of circuit designs for various MCUs, not just Raspberry Pis relating to Model Railroading

    118 parts24
  • 2 layers121.9 × 133.4 mmTivaInterchangeSMD, the printed circuit board in 3D

    TivaInterchangeSMD

    RobertPHeller/RPi-RRCircuits

    A collection of circuit designs for various MCUs, not just Raspberry Pis relating to Model Railroading

    112 parts24
  • 2 layers62.2 × 57.1 mmDCCOD SMD, the printed circuit board in 3D

    DCCOD SMD

    RobertPHeller/RPi-RRCircuits

    A collection of circuit designs for various MCUs, not just Raspberry Pis relating to Model Railroading

    108 parts24
  • 2 layers65 × 56 mm16LEDDriver23017SMD, the printed circuit board in 3D

    16LEDDriver23017SMD

    RobertPHeller/RPi-RRCircuits

    A collection of circuit designs for various MCUs, not just Raspberry Pis relating to Model Railroading

    98 parts24
  • 2 layers160 × 73.7 mmYardBoss, the printed circuit board in 3D

    YardBoss

    RobertPHeller/RPi-RRCircuits

    A collection of circuit designs for various MCUs, not just Raspberry Pis relating to Model Railroading

    95 parts24

Similar boards

  • 2 layers18.5 × 11.1 mmSwitch, the printed circuit board in 3D

    Switch

    byrantech/laptop

    anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.

    6 parts4.3kMIT
  • 2 layers14.6 × 33 mmBrain board SD Card 1, the printed circuit board in 3D

    Brain board SD Card 1

    rusefi/rusefi

    rusefi - GPL internal combustion engine control unit

    6 parts1.2k
  • 2 layers9 × 9 mmDpoint, the printed circuit board in 3D

    Dpoint

    Jcparkyn/dpoint

    Open-source digital stylus using camera tracking and inertial measurements

    6 parts1.1kMIT
  • 2 layers51.5 × 16.6 mmMicroswitchXY Endstop, the printed circuit board in 3D

    MicroswitchXY Endstop

    VoronDesign/Voron-Hardware

    Cool Hardware designed by the Voron Design group

    6 parts1.1kGPL-3.0
  • 2 layers21.9 × 76.7 mmAmiga External, the printed circuit board in 3D

    Amiga External

    hoglet67/RGBtoHDMI

    Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

    6 parts1kGPL-3.0
  • 2 layers88.9 × 50.8 mmBusinesscard, the printed circuit board in 3D

    Businesscard

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    6 parts915
  • 2 layers20.3 × 15.2 mmL0 RGB led, the printed circuit board in 3D

    L0 RGB led

    Luos-io/luos_engine

    Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.

    6 parts546MIT
  • 2 layers9 × 3.6 mmOpticalEncoder, the printed circuit board in 3D

    OpticalEncoder

    adamb314/ServoProject

    Getting the most out of your hobby servo

    6 parts545

Questions

How big is the TerminalBoard PCB?

It measures 41 × 30 mm and has 2 copper layers, 1.6 mm thick.

What parts does the TerminalBoard use?

6 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the TerminalBoard KiCad files?

From the RobertPHeller/RPi-RRCircuits repository on GitHub, at the commit this page was made from: the board is SignalHAT/TerminalBoard.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the TerminalBoard design in my own project?

Its repository states no licence, so its author keeps all rights: ask RobertPHeller before reusing the design.