
LPC176x MultiFunction
RobertPHeller/RPi-RRCircuits
A collection of circuit designs for various MCUs, not just Raspberry Pis relating to Model Railroading

A collection of circuit designs for various MCUs, not just Raspberry Pis relating to Model Railroading
SignalHAT is an open-source printed circuit board by RobertPHeller, from the RobertPHeller/RPi-RRCircuits repository on GitHub. It is a 2-layer board of 65 × 56 mm with 22 parts on 29 nets, routed with 404 tracks and 46 vias.
It is built around the 74AHCT125D and MAX7221CWG+. Its parts include 10 connectors, 3 resistors, 2 capacitors and 2 ICs. It belongs with the ESP32 boards of this library.
This is a SMD variant of 16DriverOutputHAT.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | RPi_Hat:RPi_Hat_Mounting_Hole | H1, H2, H3, H4 | |
| 1 | DWSLogoBCU | ||
| 1 | 0 Ohms | R4 | R3 |
| 1 | 0 Omhs | R4 | R2 |
| 1 | 100pf 50V | C1 | C2 |
| 1 | 10uf 25V | C1V5 | C1 |
| 1 | 33K Ohms | R1 | R1 |
| 1 | 74AHCT125 | DIP-14__300 | U2 |
| 1 | MAX7221 | DIP-24__300 | U1 |
| 1 | RPi_GPIO | RPi_Hat:Pin_Header_Straight_2x20 | J0 |
| 1 | SIL 3 header | PIN_ARRAY_3X1 | J9 |
| 1 | Signal 1 | PIN_ARRAY_5x2 | J1 |
| 1 | Signal 2 | PIN_ARRAY_5x2 | J2 |
| 1 | Signal 3 | PIN_ARRAY_5x2 | J3 |
| 1 | Signal 4 | PIN_ARRAY_5x2 | J4 |
| 1 | Signal 5 | PIN_ARRAY_5x2 | J5 |
| 1 | Signal 6 | PIN_ARRAY_5x2 | J6 |
| 1 | Signal 7 | PIN_ARRAY_5x2 | J7 |
| 1 | Signal 8 | PIN_ARRAY_5x2 | J8 |

RobertPHeller/RPi-RRCircuits
A collection of circuit designs for various MCUs, not just Raspberry Pis relating to Model Railroading

RobertPHeller/RPi-RRCircuits
A collection of circuit designs for various MCUs, not just Raspberry Pis relating to Model Railroading

RobertPHeller/RPi-RRCircuits
A collection of circuit designs for various MCUs, not just Raspberry Pis relating to Model Railroading

RobertPHeller/RPi-RRCircuits
A collection of circuit designs for various MCUs, not just Raspberry Pis relating to Model Railroading

RobertPHeller/RPi-RRCircuits
A collection of circuit designs for various MCUs, not just Raspberry Pis relating to Model Railroading

RobertPHeller/RPi-RRCircuits
A collection of circuit designs for various MCUs, not just Raspberry Pis relating to Model Railroading

RobertPHeller/RPi-RRCircuits
A collection of circuit designs for various MCUs, not just Raspberry Pis relating to Model Railroading

RobertPHeller/RPi-RRCircuits
A collection of circuit designs for various MCUs, not just Raspberry Pis relating to Model Railroading

RobertPHeller/RPi-RRCircuits
A collection of circuit designs for various MCUs, not just Raspberry Pis relating to Model Railroading

RobertPHeller/RPi-RRCircuits
A collection of circuit designs for various MCUs, not just Raspberry Pis relating to Model Railroading

RobertPHeller/RPi-RRCircuits
A collection of circuit designs for various MCUs, not just Raspberry Pis relating to Model Railroading

RobertPHeller/RPi-RRCircuits
A collection of circuit designs for various MCUs, not just Raspberry Pis relating to Model Railroading

michd/modular-synth
Building a hardware modular synthesizer, this is where I'll collect module schematics and hardware designs.



crnkovicaaron/launchclock
Key components: - MCU: ATmega328P - RTC: DS3231M with CR1220 battery backup - Displays: MAX7219-driven dual 4-digit 7-segment (5641AS) and 8x8 dot matrix (1088AS) - Input: 4x4 matrix keypad - Power: 5V DC via 5.5x2.1mm…

sudochamp/enlarger-timer
An f-stop calculation capable darkroom enlarger timer. Designed to switch mains voltage to be a drop-in solution.



It measures 65 × 56 mm and has 2 copper layers, 1.6 mm thick.
22 parts, built around the 74AHCT125D and MAX7221CWG+. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the RobertPHeller/RPi-RRCircuits repository on GitHub, at the commit this page was made from: the board is SignalHAT/SignalHAT.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask RobertPHeller before reusing the design.