
Macro devboard ESP32
YingK8/ESP32-BLE-Macro-Pad
A compact, programmable macropad with Bluetooth connectivity, featuring 6 mechanical keys and a rotary encoder for media control.

Placa interruptor inteligente com ESP32-C3 para automação residencial (relé + fonte AC-DC 12V)
Fonte rele esp c3 is an open-source printed circuit board by Renanvh98, from the Renanvh98/smart-switch-esp32c3 repository on GitHub. It is a 2-layer board of 67.5 × 54.9 mm with 35 parts on 30 nets, routed with 127 tracks and 17 vias.
It is built around the ESP32-C3-WROOM-02-H4, 1N4148WT and AO3400A. Its parts include 7 capacitors, 7 resistors, 4 diodes, 3 ICs and 3 connectors. It belongs with the ESP32 and RISC-V boards of this library.
Placa de circuito impresso para interruptor inteligente de parede, desenvolvida com o ESP32-C3 para automação residencial via Wi-Fi.



| Arquivo | Descrição |
|---|---|
fonte_rele_esp-c3.kicad_pro | Projeto KiCad |
fonte_rele_esp-c3.kicad_sch | Esquemático elétrico |
fonte_rele_esp-c3.kicad_pcb | Layout da placa |
images/ | Renderizações 3D da PCB |
O contato COM do relé é disponibilizado separadamente do terminal de entrada de fase da placa. A ligação externa deve ser feita somente após verificar o esquema elétrico e as condições de segurança da instalação.
Atenção: a placa envolve tensão de rede elétrica. A separação entre alta e baixa tensão, o dimensionamento das trilhas, a proteção por fusível e as distâncias de isolamento devem ser validados antes da fabricação e utilização.
Smart wall-switch PCB based on the ESP32-C3 for Wi-Fi home automation. The design integrates AC-DC power conversion, 3.3 V logic regulation, relay control and UART programming.
The repository contains the KiCad project, electrical schematic, PCB layout and 3D board renders.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | MountingHole | MountingHole:MountingHole_2.2mm_M2 | H1, H2, H3, H4 |
| 3 | 100nF | PCM_JLCPCB:C_0603 | C2, C5, C7 |
| 3 | Fiducial | Fiducial:Fiducial_0.5mm_Mask1mm | FID1, FID2, FID3 |
| 3 | LED | LED_SMD:LED_0805_2012Metric | D2, D3, D4 |
| 2 | 10kΩ | PCM_JLCPCB:R_0603 | R1, R3 |
| 2 | 1kΩ | PCM_JLCPCB:R_0805 | R4, R6 |
| 2 | 22uF | PCM_JLCPCB:C_1206 | C4, C6 |
| 1 | 10kΩ | Resistor_SMD:R_0603_1608Metric | R7 |
| 1 | 10uF | PCM_JLCPCB:C_0805 | C3 |
| 1 | 1N4148WT | Diode_SMD:D_SOD-523 | D1 |
| 1 | 1kΩ | PCM_JLCPCB:R_0603 | R2 |
| 1 | 470Ω | PCM_JLCPCB:R_0805 | R5 |
| 1 | 47uF | PCM_JLCPCB:C_1206 | C1 |
| 1 | AO3400A | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | AZ1117CH2-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U1 |
| 1 | Conn_01x05_Pin | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J2 |
| 1 | ESP32-C3-WROOM-02 | RF_Module:ESP32-C3-WROOM-02 | U3 |
| 1 | Fuse_Small | Fuse:Fuseholder_Littelfuse_Nano2_157x | F1 |
| 1 | G5LE-1 | Relay_THT:Relay_SPDT_Omron-G5LE-1 | K1 |
| 1 | HS-40012 | Converter_ACDC:Converter_ACDC_Hahn_HS-400xx_THT | U2 |
| 1 | LOGO | LOGO | G*** |
| 1 | Screw_Terminal_01x02 | TerminalBlock_MetzConnect:TerminalBlock_MetzConnect_Type094_RT03502HBLU_1x02_P5.00mm_Horizontal | J1 |
| 1 | Screw_Terminal_01x03 | TerminalBlock_MetzConnect:TerminalBlock_MetzConnect_Type094_RT03503HBLU_1x03_P5.00mm_Horizontal | J3 |

YingK8/ESP32-BLE-Macro-Pad
A compact, programmable macropad with Bluetooth connectivity, featuring 6 mechanical keys and a rotary encoder for media control.

acha666/RP2040_ToolheadPCB_SB
A Toolhead PCB for VORON StealthBurner based on RP2040

SP6GK/Forte-600-HF-RF-Amplifier
Project of 600 W LDMOS amlifier based on 2xMRF300.

ebastler/UnMechanical
Capacitive touch keyboard running QMK firmware


Ghost3379/NX-ISD
A more sophisticated version of the Artemis Watch by Circuitmess.


MohanrajDS/micro-drone-fc-kicad
Compact 4-layer micro drone flight controller PCB (XIAO ESP32-S3 + MPU-6050, 4x brushed motor drivers) designed in KiCad 9
It measures 67.5 × 54.9 mm and has 2 copper layers, 1.6 mm thick.
35 parts, built around the ESP32-C3-WROOM-02-H4, 1N4148WT and AO3400A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Renanvh98/smart-switch-esp32c3 repository on GitHub, at the commit this page was made from: the board is fonte_rele_esp-c3.kicad_pcb and its schematic fonte_rele_esp-c3.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask Renanvh98 before reusing the design.