
Smart Plant
JGAguado/Smart_Plant
The Smart Plant is a board that can be plugged directly on the soil, close to the plant, that allows the measurement of the environment (soil moisture, environment temperature & illuminance), and presents the…

Analog amplifier is an open-source printed circuit board by RadoslawSajdak, from the RadoslawSajdak/Analog-project repository on GitHub. It is a 2-layer board of 58.5 × 40.6 mm with 46 parts on 27 nets, routed with 212 tracks and 264 vias.
It is built around the SS14. Its parts include 17 capacitors, 14 resistors, 6 connectors, 4 ICs and 2 diodes. It belongs with the audio and music boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | 100n | Capacitor_SMD:C_0603_1608Metric | C1, C9, C10, C11, C12, C13, C14, C15, C16, C17 |
| 4 | 1.5p | Capacitor_SMD:C_0603_1608Metric | C3, C4, C6, C7 |
| 4 | 49.9 | Resistor_SMD:R_0603_1608Metric | R5, R10, R11, R12 |
| 4 | Conn_Coaxial_Small | Connector_Coaxial:SMA_Samtec_SMA-J-P-X-ST-EM1_EdgeMount | J1, J2, J3, J4 |
| 2 | 10n | Capacitor_SMD:C_0603_1608Metric | C2, C5 |
| 2 | 1Meg | Resistor_SMD:R_0603_1608Metric | R4, R9 |
| 2 | 1k | Resistor_SMD:R_0603_1608Metric | R6, R7 |
| 2 | 2.5Meg | Resistor_SMD:R_0603_1608Metric | R3, R8 |
| 2 | 28k | Resistor_SMD:R_0603_1608Metric | R2, R15 |
| 2 | 499 | Resistor_SMD:R_0603_1608Metric | R13, R14 |
| 2 | Conn_01x01_Socket | Connector_PinSocket_2.54mm:PinSocket_1x01_P2.54mm_Vertical | J5, J6 |
| 2 | Jumper_2_Open | Connector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_Vertical | JP1, JP2 |
| 2 | LT6202 | Package_SO:SO-8_3.9x4.9mm_P1.27mm | U1, U3 |
| 2 | LT6404IUD | Package_DFN_QFN:QFN-16-1EP_3x3mm_P0.5mm_EP1.45x1.45mm | U2, U4 |
| 1 | 1u | Capacitor_SMD:C_0805_2012Metric | C8 |
| 1 | D_Zener 5.1V | Package_TO_SOT_SMD:SOT-23-3 | D1 |
| 1 | Polyfuse | Resistor_SMD:R_0603_1608Metric | F1 |
| 1 | SS14 | Diode_SMD:D_SMA | D2 |

JGAguado/Smart_Plant
The Smart Plant is a board that can be plugged directly on the soil, close to the plant, that allows the measurement of the environment (soil moisture, environment temperature & illuminance), and presents the…

ugcs/ddc
Drone Show Software is software designed for drone shows, allowing flight path planning as well as control of dozens of drones simultaneously in a synchronized manner.

eddyem/stm32samples
Code samples and ready projects based on bare-metal STM32



execuc/u2if
USB to interfaces implementing MicroPython "machine" module functionalities on a computer.

ZeroPhone/ZeroPhone-PCBs
PCB files for ZeroPhone - for gerbers and schematics, go to "Releases" tab!

It measures 58.5 × 40.6 mm and has 2 copper layers, 1.6 mm thick.
46 parts, built around the SS14. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the RadoslawSajdak/Analog-project repository on GitHub, at the commit this page was made from: the board is analog-amplifier/analog-amplifier.kicad_pcb and its schematic analog-amplifier/analog-amplifier.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask RadoslawSajdak before reusing the design.