2 layers59.6 × 65.9 mm
REF1011
RWeick/REF1011-Sega-GameGear-Pro-Action-Replay
The JEDEC PAL dump, ROM dump, and Kicad PCB files for the Sega GameGear Pro Action Replay.
18 parts5GPL-3.0
2 layers53 × 65 mm
Everything necessary to produce the Pro Action Replay for the Gameboy.
- Size
- 53 × 65 mm
- Copper layers
- 2
- Thickness
- 0.8 mm
- Parts
- 16
- Nets
- 57
- Pads
- 199
- Tracks, vias
- 1,062, 107
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 15 Sep 2024
- Updated
- 15 Sep 2024
Overview
GBOY is an open-source printed circuit board by RWeick, from the RWeick/Datel-Gameboy-Pro-Action-Replay repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 53 × 65 mm with 16 parts on 57 nets, routed with 1,062 tracks and 107 vias.
It is built around the 27C256-17/J and 74HC74D. Its parts include 5 ICs, 2 capacitors, 2 resistors, 2 diodes and 2 connectors. It belongs with the retro computing and games boards of this library.
Main components
227C256-17/J
-0℃~+70℃ 256Kbit 4.5V~5.5V EPROM Parallel Port (Parallel) - Non-Volatile Memory (ROM)Microchip TechnologyNon-Volatile Memory (ROM)
74HC74D
SOIC-14-40℃~+125℃ 1 15ns 2 2V~6V 3.5pF 37ns@6V,50pF 3ns、3ns、3ns 40uA 5.2mA 5.2mA 74HC Series 82MHz Asynchronous Complementary D-Type Rising Edge Set and Reset SOIC-14 Flip Flops ROHSNexperiaFlip Flops
README
README.mdDatel-Gameboy-Pro-Action-Replay
Everything necessary to produce the Pro Action Replay for the Gameboy.
PCB Thickness: 0.8 mm
Parts
16| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 100 nF | GBOY:1206 SMD | C1, C2 |
| 2 | D_Filled | GBOY:1206 SMD | D1, D2 |
| 1 | 27C256 | GBOY:EPROM | U1 |
| 1 | 3.3K Ohm | GBOY:1206 SMD | R2 |
| 1 | 47K Ohm | GBOY:1206 SMD | R1 |
| 1 | 7432 | GBOY:SOIC-14 | U4 |
| 1 | 74HC74 | GBOY:SOIC-14 | U3 |
| 1 | Button | GBOY:Button | SW2 |
| 1 | Cart_Edge_Connector | GBOY:Edge Connector | J1 |
| 1 | Drill Hole | GBOY:Drill Hole | Hole |
| 1 | Game_Edge_Connector | GBOY:Cartridge Slot | J2 |
| 1 | PALCE_20V8Q-25JC/4 | GBOY:PALCE | U2 |
| 1 | Slide Switch | GBOY:Switch | SW1 |
| 1 | ~ | GBOY:SRAM | U5 |
Similar boards
- 2 layers101.6 × 72.4 mm
Upd7801-reader
devinacker/upd7801-reader
ROM reader for NEC µCOM-87 (uPD7801 series) microcontrollers
40 parts1 - 2 layers142.2 × 99.1 mm
- 4 layers184.9 × 243.8 mm
Project NuXT
monotech/NuXT
MicroATX Turbo XT Motherboard, with VGA, Floppy, CF, Serial
223 parts121GPL-3.0 - 2 layers104.1 × 87.6 mm
- 2 layers237.7 × 146.1 mm
- 4 layers318.4 × 124.5 mm
- 2 layers100 × 77.5 mm
Questions
How big is the GBOY PCB?
It measures 53 × 65 mm and has 2 copper layers, 0.8 mm thick.
What parts does the GBOY use?
16 parts, built around the 27C256-17/J and 74HC74D. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the GBOY KiCad files?
From the RWeick/Datel-Gameboy-Pro-Action-Replay repository on GitHub, at the commit this page was made from: the board is GBOY.kicad_pcb and its schematic GBOY.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the GBOY design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).