

CUSTOM stm32f103 DEVELOPMENT BOARD
- Size
- 50 × 67.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 84
- Nets
- 73
- Pads
- 326
- Tracks, vias
- 1,067, 121
- Pours
- 5
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 15 Nov 2021
- Updated
- 15 Nov 2021
Overview
CUSTOM stm32f103 DEVELOPMENT BOARD is an open-source printed circuit board by R-Mutura, from the R-Mutura/STM32F103_iot repository on GitHub. It is a 2-layer board of 50 × 67.5 mm with 84 parts on 73 nets, routed with 1,067 tracks and 121 vias.
It is built around the BQ24167RGER, LM1117-3.3 and IRF5305PBF. Its parts include 29 capacitors, 23 resistors, 11 connectors, 6 ICs and 6 diodes. It belongs with the microcontroller boards boards and the STM32 boards of this library.
Main components
3BQ24167RGER
VQFN-24(4x4)VQFN-24(4x4) Battery Management ROHSTexas InstrumentsBattery ManagementLM1117-3.3
SOT-2231 1.3V@(1000mA) 15V 1A 2mA 3.3V Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHShongjiachengUncategorisedIRF5305PBF
TO-220AB-55℃~+175℃ 1 P-Channel 1.2nF 110W 31A 4V 55V 60mΩ@10V 63nC@10V P-Channel TO-220AB MOSFETs ROHSInfineon TechnologiesMOSFETs
Parts
84| Qty | Value | Footprint | References |
|---|---|---|---|
| 14 | 10k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R2, R3, R4, R5, R7, R8, R10, R11, R12, R13, R17, R19, R22 |
| 5 | 0.1uF | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C5, C9, C13, C14, C27 |
| 4 | 1uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C16, C19, C24, C26 |
| 3 | 0.1uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C10, C23, C28 |
| 3 | 10uF | Capacitor_SMD:C_0805_2012Metric | C7, C12, C15 |
| 2 | 0.1uF | Capacitor_SMD:C_0603_1608Metric | C6, C8 |
| 2 | 10pF | Capacitor_SMD:C_0603_1608Metric | C3, C4 |
| 2 | 1k | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R23, R24 |
| 2 | 22pF | Capacitor_SMD:C_0603_1608Metric | C1, C2 |
| 2 | 4.7uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C18, C20 |
| 2 | LM741 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U4, U5 |
| 1 | 0 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R15 |
| 1 | 0.01uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C25 |
| 1 | 0.01uF(16V) | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C21 |
| 1 | 0.1uF | Capacitor_SMD:C_0402_1005Metric | C11 |
| 1 | 10uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C17 |
| 1 | 180 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R9 |
| 1 | 1N5817 | Diode_SMD:D_0603_1608Metric | D6 |
| 1 | 1N5817 | Diode_SMD:D_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D1 |
| 1 | 25k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R6 |
| 1 | 2k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R20 |
| 1 | 3.7k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R16 |
| 1 | 350 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R14 |
| 1 | 47uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C22 |
| 1 | 4k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R21 |
| 1 | 8MHz | Crystal:Crystal_SMD_HC49-SD | Y1 |
| 1 | Antenna | Connector_Coaxial:U.FL_Hirose_U.FL-R-SMT-1_Vertical | AE1 |
| 1 | BQ24167RGE | Package_DFN_QFN:Texas_RGE0024H_EP2.7x2.7mm_ThermalVias | U3 |
| 1 | Barrel_Jack_Switch | Connector_BarrelJack:BarrelJack_Horizontal | J2 |
| 1 | Battery_connector | Connector_JST:JST_EH_B2B-EH-A_1x02_P2.50mm_Vertical | J5 |
| 1 | Battery_full | Diode_SMD:D_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D7 |
| 1 | C | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C29 |
| 1 | CHARGING_ON | Diode_SMD:D_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D5 |
| 1 | Charge_Battery | Diode_SMD:D_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D8 |
| 1 | Conn_01x10_Male | Connector_PinHeader_2.54mm:PinHeader_1x10_P2.54mm_Vertical | J7 |
| 1 | Crystal_GND24_Small | Crystal:Crystal_SMD_SeikoEpson_MA406-4Pin_11.7x4.0mm | Y2 |
| 1 | DIO3 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical_SMD_Pin1Left | J10 |
| 1 | DIO4 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical_SMD_Pin1Left | J11 |
| 1 | DIO5 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical_SMD_Pin1Left | J9 |
| 1 | IRF5305 | Package_TO_SOT_SMD:TO-263-2 | Q1 |
| 1 | L | Inductor_SMD:L_0603_1608Metric_Pad1.05x0.95mm_HandSolder | L1 |
| 1 | LM1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U2 |
| 1 | Micro_SD_Card_Det_Hirose_DM3AT | Connector_Card:microSD_HC_Hirose_DM3D-SF | J4 |
| 1 | ON_BOARD_LED | Diode_SMD:D_0603_1608Metric_Pad1.05x0.95mm_HandSolder | ON BOARD LED |
| 1 | POWER_LED | Diode_SMD:D_0603_1608Metric_Pad1.05x0.95mm_HandSolder | POWER |
| 1 | RFM97W-915S2 | RF_Module:HOPERF_RFM9XW_SMD | U6 |
| 1 | STATUS_OK | Diode_SMD:D_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D4 |
| 1 | STLINK_CONN | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J6 |
| 1 | STM32F103C8Tx | Package_QFP:LQFP-48_7x7mm_P0.5mm | U1 |
| 1 | SW_Push | Button_Switch_SMD:SW_SPST_B3U-1000P | SW2 |
| 1 | SW_Push | Button_Switch_SMD:SW_SPST_B3U-1000P-B | SW1 |
| 1 | TFT SCREEN CONN | Connector_Molex:Molex_KK-254_AE-6410-08A_1x08_P2.54mm_Vertical | J8 |
| 1 | USB_B_Micro | Connector_USB:USB_Micro-B_Molex_47346-0001 | J1 |
| 1 | USB_charge_selector | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical_SMD_Pin1Left | J3 |
Similar boards
- 4 layers184.2 × 169.5 mm

- 2 layers242 × 60 mm

- 2 layers160 × 95 mm

Placa Control Fuentes y Carga
edgranzella/Placa-de-Corte-TX
Circuito Impreso de la plaquetita de Corte TX que va apilada sobre el Arduino Nano de la placa Controladora de Fuentes y Carga.
142 parts - 2 layers74.7 × 69.1 mm

Throttle tune
Jonny999999/throttle-tune
onversion of an old gasoline lawn tractor to an electric vehicle
51 parts - 2 layers100 × 60 mm

- 4 layers172.3 × 57.5 mm

PCBDesign
nmahadevan12/MIS
Raspberry Pi multifunction instrumentation — digipot SAR ADC, ±12 V rail, function gens, KiCad Pi HAT (ECSE 2920).
103 parts - 2 layers108.7 × 63.5 mm

RaspiCar
phaenovum/RaspiCar
A model car equipped with a Raspberry Pi, intended for experimenting with tools and algorithms for autonomous navigation
71 parts - 4 layers203.8 × 99.1 mm

ISOpower complete bothboards
practable/iso-power-pcb
Remote power control board for ISO experiment containers, used for remote labs projects
196 partsGPL-3.0
Questions
How big is the CUSTOM stm32f103 DEVELOPMENT BOARD PCB?
It measures 50 × 67.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the CUSTOM stm32f103 DEVELOPMENT BOARD use?
84 parts, built around the BQ24167RGER, LM1117-3.3 and IRF5305PBF. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the CUSTOM stm32f103 DEVELOPMENT BOARD KiCad files?
From the R-Mutura/STM32F103_iot repository on GitHub, at the commit this page was made from: the board is CUSTOM stm32f103 DEVELOPMENT BOARD.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the CUSTOM stm32f103 DEVELOPMENT BOARD design in my own project?
Its repository states no licence, so its author keeps all rights: ask R-Mutura before reusing the design.