2 layers69.5 × 93.5 mm
SAFE LOCKOUT
Queens-Rocket-Engineering-Team/prop-ecad
All PCB and electrical schematics for the propulsion team
48 parts
2 layers92 × 79.3 mm
All PCB and electrical schematics for the propulsion team
- Size
- 92 × 79.3 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 63
- Nets
- 66
- Pads
- 192
- Tracks, vias
- 345, 4
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 7 Feb 2025
- Updated
- 5 Aug 2025
Overview
TC Amp is an open-source printed circuit board by Queens-Rocket-Engineering-Team, from the Queens-Rocket-Engineering-Team/prop-ecad repository on GitHub. It is a 2-layer board of 92 × 79.3 mm with 63 parts on 66 nets, routed with 345 tracks and 4 vias.
It is built around the LT1054CP and LM317T. Its parts include 23 resistors, 14 capacitors, 12 ICs, 5 connectors and 1 transistor. It belongs with the audio and music boards of this library.
Main components
2
LT1054CP
PDIP-8-5V 0℃~+70℃ 100mA 10Ω 2.5mA 25kHz 3.5V~15V Inverted Low-power standby、Adaptive switching frequency PDIP-8 Charge Pumps ROHSTexas InstrumentsDC-DC Converters
LM317T
TO-2200.003%Vout 0℃~+125℃@(Tj) 1 1.2V~37V 1.5A 40V 66dB@(120Hz) Adjustable Over Current Protection、Over Temperature Protection Positive TO-220 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSUMWVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
Parts
63| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | 10k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R5, R6, R7, R8, R11, R12, R13, R14, R18, R19, R20, R21 |
| 10 | 0.1u | Capacitor_THT:C_Radial_D5.0mm_H5.0mm_P2.00mm | C1, C2, C6, C7, C8, C9, C10, C11, C12, C13 |
| 9 | R_US | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1, R2, R3, R4, R9, R10, R15, R16, R17 |
| 6 | LTC1049CN8_PBF | Footprints:PDIP-8_N | U2, U5, U8, U9, U12, U13 |
| 3 | LM741 | Footprints:J08A_TEX | U4, U7, U11 |
| 3 | MountingHole | MountingHole:MountingHole_3.2mm_M3_DIN965 | H1, H2, H3 |
| 3 | R_Potentiometer_US | Potentiometer_THT:Potentiometer_Bourns_3386W_Horizontal | RV1, RV2, RV3 |
| 3 | Screw_Terminal_01x02 | Footprints:TC_SOCKET | J1, J4, J5 |
| 2 | 100u | Capacitor_THT:C_Radial_D5.0mm_H5.0mm_P2.00mm | C3, C5 |
| 2 | LOGO | LOGO | G***, G*** |
| 1 | 1.5k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R22 |
| 1 | 1u | Capacitor_THT:C_Radial_D5.0mm_H5.0mm_P2.00mm | C14 |
| 1 | 2u | Capacitor_THT:C_Radial_D5.0mm_H5.0mm_P2.00mm | C4 |
| 1 | 500 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R23 |
| 1 | Conn_01x04_Pin | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J3 |
| 1 | LM317T | digikey-footprints:TO-220-3 | U14 |
| 1 | LT1025CN8-PBF | Footprints:PDIP8_LT1025CN8-PBF_ADI | U15 |
| 1 | LT1054 | Footprints:DIP794W45P254L959H508Q8 | U3 |
| 1 | PMOS | Footprints:PFET_VERT | Q1 |
| 1 | Screw_Terminal_01x02 | TerminalBlock:TerminalBlock_bornier-2_P5.08mm | J2 |
More from Queens-Rocket-Engineering-Team/prop-ecad
4- 2 layers89.5 × 74 mm
ADC QRET
Queens-Rocket-Engineering-Team/prop-ecad
All PCB and electrical schematics for the propulsion team
42 parts - 2 layers61 × 44 mm
PD Regulation
Queens-Rocket-Engineering-Team/prop-ecad
All PCB and electrical schematics for the propulsion team
26 parts - 2 layers90 × 90 mm
KAPTON HEATERV2
Queens-Rocket-Engineering-Team/prop-ecad
All PCB and electrical schematics for the propulsion team
22 parts
Similar boards
- 4 layers82.6 × 82.5 mm
- 2 layers213 × 128.5 mm
- 2 layers69 × 53.7 mm
- 2 layers208.3 × 146.1 mm
- 4 layers160 × 100 mm
Hex Oscilloscope
HexFud/stm32-fpga-oscilloscope
A 1-Channel 20MHz 100MS/s Mixed-Signal Digital Storage Oscilloscope on a custom 4-layer PCB. Powered by STM32H7, Lattice iCE40 FPGA, and USB-C
120 parts1 - 2 layers195.6 × 113 mm
HVA
blue-wind-25/JxMake
JxMake is a Java-based, cross-platform build system primarily inspired by the syntax and features of GNU Make, Perforce Jam, and CMake.
228 parts - 4 layers74.7 × 79.5 mm
Preamp for bass guitar
ckeramidas/preamp-for-bass-guitar
schematic, pcb, other stuff for preamp for bass guitar
91 parts - 4 layers57 × 74.8 mm
Questions
How big is the TC Amp PCB?
It measures 92 × 79.3 mm and has 2 copper layers, 1.6 mm thick.
What parts does the TC Amp use?
63 parts, built around the LT1054CP and LM317T. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the TC Amp KiCad files?
From the Queens-Rocket-Engineering-Team/prop-ecad repository on GitHub, at the commit this page was made from: the board is TC_Amp/TC_Amp.kicad_pcb and its schematic ADC_Breakout/ADC_QRET.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the TC Amp design in my own project?
Its repository states no licence, so its author keeps all rights: ask Queens-Rocket-Engineering-Team before reusing the design.