
Mist1010
UzixLS/mist1010-board
10x10cm PCB variant of MIST FPGA project for G738/G706 enclosure

Rebooting a device that refuses to reboot
FireboxRebooter is an open-source printed circuit board by Qeteshpony, from the Qeteshpony/FireboxRebooter repository on GitHub, published under the MIT licence. It is a 4-layer board of 40 × 40 mm with 28 parts on 18 nets, routed with 104 tracks and 19 vias.
It is built around the ATTINY45-20SU and SI2302. Its parts include 9 resistors, 5 diodes, 4 connectors, 3 transistors and 1 capacitor. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Rebooting a device that refuses to reboot
This piece of software, together with the hardware in this repository, allows automatic rebooting of a modified Watchguard Firebox M400 or M500 when the normal reboot doesn't work anymore.
See https://electronics.qetesh.de/firebox-rebooter/ for details!
| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 1k5 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2, R3, R4, R5 |
| 4 | MH | MountingHole:MountingHole_3.2mm_M3_Pad_Via | H1, H2, H3, H4 |
| 3 | Si2302 | Package_TO_SOT_SMD:SOT-23_Handsoldering | Q1, Q2, Q3 |
| 2 | 10k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R6, R9 |
| 2 | 1k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R7, R8 |
| 1 | 100nF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1 |
| 1 | ATtiny45-20SU | Package_SO:SOIJ-8_5.3x5.3mm_P1.27mm | U1 |
| 1 | ICSP | Connector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_Vertical | J1 |
| 1 | LED_SENSE | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J2 |
| 1 | LED_SENSE | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D4 |
| 1 | LED_WAIT | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D5 |
| 1 | LOGO | My_Footprints:CutieMark5mmInverted | G*** |
| 1 | MB_PWRBTN | My_Footprints:Wurth_WR-WTB_2.54mm_2Pin | J3 |
| 1 | PWR | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D1 |
| 1 | PWR_BTN | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D3 |
| 1 | PWR_SENSE | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D2 |
| 1 | REAR_PWRBTN | My_Footprints:Wurth_WR-WTB_2.54mm_2Pin | J4 |

UzixLS/mist1010-board
10x10cm PCB variant of MIST FPGA project for G738/G706 enclosure

Petezah/roomba_wall_v2
An AVR program for ATTiny85 to transmit a virtual wall signal for an iRobot Roomba




cbs-ntcore/cbs_badge
This badge is designed to highlight digital fabrication techniques that are commonly used in the Neurotechnology Core(NTCore) at the Center for Brain Science at Harvard University.

enwi/PiSupply
Uninterruptable power supply for Raspberry Pi's, which can also power external HDDs

mar0x/bike_motor_shim
Shimano e-bike shim between wheel sensor and motor to "extend the limits"
It measures 40 × 40 mm and has 4 copper layers, 1.6 mm thick.
28 parts, built around the ATTINY45-20SU and SI2302. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Qeteshpony/FireboxRebooter repository on GitHub, at the commit this page was made from: the board is KiCad Files/FireboxRebooter.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).