6 layers55 × 95 mm
2 layers100 × 65 mm
DSL Modem
Qeteshpony/DSL-ModemControl a certain DSL-Modem through its internal serial port with a Raspberry Pi
- Size
- 100 × 65 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 57
- Nets
- 89
- Pads
- 275
- Tracks, vias
- 352, 67
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 17 Oct 2023
- Updated
- 5 Nov 2026
Overview
DSL Modem is an open-source printed circuit board by Qeteshpony, from the Qeteshpony/DSL-Modem repository on GitHub, published under the MIT licence. It is a 2-layer board of 100 × 65 mm with 57 parts on 89 nets, routed with 352 tracks and 67 vias.
It is built around the ATTINY85-20SU, LME78_05-2.0 and 1N5819WS, with the AO3401A among its other parts. Its parts include 22 resistors, 12 connectors, 5 capacitors, 5 diodes and 4 transistors. It belongs with the interfaces and adapters boards and the AVR (ATmega, ATtiny) boards of this library.
Main components
4
ATTINY85-20SU
SOIC-8-208mil-40℃~+85℃ 10bit 2.7V~5.5V 20MHz 512Byte 512Byte 6 8 Bit 8KB AVR Built-in FLASH SOIC-8-208mil Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)LME78_05-2.0
-Power Supply Module,Power SuppliesGAPTEC Electronic
1N5819WS
SOD-3231 Independent 1A 25A 40V 500uA@40V 600mV@1A SOD-323 Schottky Diodes ROHSGuangdong HottechSchottky Diodes
AO3401A
SOT-231 P-Channel 14nC@10V 30V 47mΩ@10V、60mΩ@4.5V、85mΩ@2.5V 4A 55pF 645pF 80pF 900mV SOT-23 MOSFETs ROHSAlpha & Omega SemiconductorMOSFETs
README
README.mdDSL-Modem Controller
A project to control a certain DSL-Modem through its internal serial port with a Raspberry Pi
Parts
57| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 680R | Resistor_SMD:R_0603_1608Metric | R7, R8, R13, R14, R15, R16, R17, R18 |
| 7 | 4k7 | Resistor_SMD:R_0603_1608Metric | R5, R6, R9, R10, R19, R21, R22 |
| 3 | 10k | Resistor_SMD:R_0603_1608Metric | R2, R11, R12 |
| 3 | 2N7002 | Package_TO_SOT_SMD:SOT-23 | Q2, Q3, Q4 |
| 2 | 100k | Resistor_SMD:R_0603_1608Metric | R1, R3 |
| 1 | 100n | Capacitor_SMD:C_0603_1608Metric | C3 |
| 1 | 100uF | Capacitor_SMD:C_1206_3216Metric | C2 |
| 1 | 10u | Capacitor_SMD:C_0603_1608Metric | C5 |
| 1 | 12VIN | My_Footprints:CTB9352-2 | J1 |
| 1 | 12VOUT | My_Footprints:CTB9352-2 | J2 |
| 1 | 12Vout | LED_SMD:LED_0603_1608Metric | D4 |
| 1 | 12in | LED_SMD:LED_0603_1608Metric | D3 |
| 1 | 1N5819WS | Diode_SMD:D_SOD-323 | D2 |
| 1 | 1k5 | Resistor_SMD:R_0603_1608Metric | R20 |
| 1 | 1n | Capacitor_SMD:C_0603_1608Metric | C4 |
| 1 | 200k | Resistor_SMD:R_0603_1608Metric | R4 |
| 1 | 22uF | Capacitor_SMD:C_0805_2012Metric | C1 |
| 1 | 5V | LED_SMD:LED_0603_1608Metric | D5 |
| 1 | AO3401A | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | ATtiny85-20SU | Package_SO:SOIC-8W_5.3x5.3mm_P1.27mm | U2 |
| 1 | AVR-ISP-6 | Connector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_Vertical | J12 |
| 1 | Display | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J5 |
| 1 | DualLED | My_Footprints:Everlight_Dual_LED_2x3mm | D1 |
| 1 | ETH1_EXT | Connector_RJ:RJ45C5_R1D_3.2E4G-Y_RL | J6 |
| 1 | ETH1_INT | Connector_RJ:RJ45C5_R1D_3.2E4G-Y_RL | J9 |
| 1 | ETH2_EXT | Connector_RJ:RJ45C5_R1D_3.2E4G-Y_RL | J7 |
| 1 | ETH2_INT | Connector_RJ:RJ45C5_R1D_3.2E4G-Y_RL | J10 |
| 1 | ETH3_EXT | Connector_RJ:RJ45C5_R1D_3.2E4G-Y_RL | J8 |
| 1 | ETH3_INT | Connector_RJ:RJ45C5_R1D_3.2E4G-Y_RL | J11 |
| 1 | Fan | Connector:FanPinHeader_1x04_P2.54mm_Vertical | M1 |
| 1 | LME78_05-2.0 | My_Footprints:LME78_1.0-Series | U1 |
| 1 | LOGO | My_Footprints:CutieMark7.5mmInverted | G*** |
| 1 | Raspberry_Pi_2_3 | My_Footprints:Raspberry Pi Universal Footprint | J4 |
| 1 | SW_Modem | Button_Switch_THT:SW_Tactile_SPST_Angled_PTS645Vx83-2LFS | SW1 |
| 1 | SW_Pi | Button_Switch_THT:SW_Tactile_SPST_Angled_PTS645Vx83-2LFS | SW2 |
| 1 | Serial | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J3 |
The 54 most common of 57 parts.
Similar boards
- 4 layers88 × 30 mm
- 4 layers56 × 43.3 mm
- 4 layers107.6 × 59.8 mm
TimeDisk
garrettsworkshop/TimeDisk
Apple II memory expansion card with 1 MB battery-backed RAM and NoSlotClock-compatible clock
70 parts19 - 4 layers115.5 × 96.2 mm
Closed deck x4
OpenLogicEFI/Hardware
Hardware is based off an open source project called Speeduino by Josh Stewart.
245 parts19 - 4 layers34.5 × 39 mm
- 4 layers54.7 × 78.5 mm
DisplayModule PONSv71
MasaoC/GPS-TFT-Map_PONS
鳥人間コンテストに特化したGNSS誘導システム。人力飛行機のパイロットが使いやすいことを目標にした航法装置です。ハードとソフトをオープンソースで開発しています。
151 parts14MIT - 2 layers74 × 34 mm
VhARIO ESPC3
har-in-air/VhARIO-ESPC3
Kicad schematic and layout for ESP32-C3 + MPU9250 + MS5611 audio vario
57 parts13GPL-3.0
Questions
How big is the DSL Modem PCB?
It measures 100 × 65 mm and has 2 copper layers, 1.6 mm thick.
What parts does the DSL Modem use?
57 parts, built around the ATTINY85-20SU, LME78_05-2.0, 1N5819WS and AO3401A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the DSL Modem KiCad files?
From the Qeteshpony/DSL-Modem repository on GitHub, at the commit this page was made from: the board is hardware/PCB/DSL-Modem.kicad_pcb and its schematic hardware/PCB/DSL-Modem.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the DSL Modem design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).