
ESP32-Geiger Counter
AronASzucs/Avalanche32
Handheld ESP32-S3 Geiger counter with a firmware-regulated 400 V boost, SBM-20 tube, USB-C charging and OLED display.

An NFC reader project for reading and identifying NFC tags and cards
My NFC Reader is an open-source printed circuit board by PrinceYadav78, from the PrinceYadav78/My-NFC-Reader repository on GitHub, published under the MIT licence. It is a 4-layer board of 46 × 89.5 mm with 54 parts on 89 nets, routed with 338 tracks and 76 vias.
It is built around the ESP32-S3-WROOM-1-N8, AP63203WU and WS2812B. Its parts include 15 capacitors, 14 resistors, 4 diodes, 4 switches and 3 ICs. It belongs with the radio and wireless boards and the ESP32 boards of this library.
This is my very own prototype of an NFC Reader, built using the ESP32 microcontroller! It’s a compact, wireless module designed to read and interact with NFC tags and cards.
Plug in a USB cable into the receptacle. Install the ESP32IDE for configuration of the firmware.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 10k | Resistor_SMD:R_0402_1005Metric | R3, R8, R10, R11, R12 |
| 4 | 0.1uF | Capacitor_SMD:C_0402_1005Metric | C1, C4, C6, C11 |
| 4 | LOGO | lightbulb:star | G***, G***, G***, G*** |
| 3 | 100k | Resistor_SMD:R_0402_1005Metric | R4, R6, R7 |
| 3 | 1uF | Capacitor_SMD:C_0402_1005Metric | C3, C7, C12 |
| 2 | 15pF | Capacitor_SMD:C_0402_1005Metric | C14, C15 |
| 2 | 5.1k | Resistor_SMD:R_0402_1005Metric | R1, R2 |
| 1 | 1.8k | Resistor_SMD:R_0402_1005Metric | R9 |
| 1 | 100nF | Capacitor_SMD:C_0402_1005Metric | C13 |
| 1 | 100pF | Capacitor_SMD:C_0402_1005Metric | C9 |
| 1 | 10uF | Capacitor_SMD:C_0402_1005Metric | C10 |
| 1 | 220 | Resistor_SMD:R_0402_1005Metric | R14 |
| 1 | 220pF | Capacitor_SMD:C_0402_1005Metric | C8 |
| 1 | 27.12MHz | Crystal:Crystal_HC49-U-3Pin_Vertical | Y1 |
| 1 | 330 | Resistor_SMD:R_0402_1005Metric | R13 |
| 1 | 4.7uF | Capacitor_SMD:C_0402_1005Metric | C5 |
| 1 | 4.7uH | Inductor_SMD:L_0402_1005Metric | L1 |
| 1 | 47uF | Capacitor_SMD:C_0402_1005Metric | C2 |
| 1 | 56k | Resistor_SMD:R_0402_1005Metric | R5 |
| 1 | AP63203WU | Package_TO_SOT_SMD:TSOT-23-6 | U2 |
| 1 | Antenna_Loop | RF_Antenna:Coilcraft_MA5532-AE_RFID | AE2 |
| 1 | BOOT | Button_Switch_SMD:SW_Tactile_SPST_NO_Straight_CK_PTS636Sx25SMTRLFS | SW2 |
| 1 | Buzzer | Buzzer_Beeper:Buzzer_15x7.5RM7.6 | BZ1 |
| 1 | Conn_01x02_Pin | Connector_PinHeader_1.00mm:PinHeader_1x02_P1.00mm_Vertical | J2 |
| 1 | Conn_01x08 | Connector_PinHeader_1.00mm:PinHeader_1x08_P1.00mm_Vertical | J3 |
| 1 | D | Diode_SMD:D_0402_1005Metric | D2 |
| 1 | D_Schottky | Diode_SMD:D_0402_1005Metric | D1 |
| 1 | D_TVS | Diode_SMD:D_SMA | D4 |
| 1 | ESP32-S3-WROOM-1 | RF_Module:ESP32-S3-WROOM-1 | U1 |
| 1 | FerriteBead_Small | Inductor_SMD:L_0402_1005Metric | FB1 |
| 1 | PMOS | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | PN5321A3HN_C1xx | Package_DFN_QFN:HVQFN-40-1EP_6x6mm_P0.5mm_EP4.1x4.1mm | U3 |
| 1 | Q_NMOS | Package_TO_SOT_SMD:SOT-23 | Q2 |
| 1 | RESET | Button_Switch_SMD:SW_Tactile_SPST_NO_Straight_CK_PTS636Sx25SMTRLFS | SW1 |
| 1 | Relay_SPDT | Relay_THT:Relay_SPDT_Finder_34.51_Vertical | K1 |
| 1 | USB_C_Receptacle_USB2.0_16P | Connector_USB:USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J1 |
| 1 | USER_INPUT | Button_Switch_SMD:SW_Tactile_SPST_NO_Straight_CK_PTS636Sx25SMTRLFS | SW3 |
| 1 | WS2812B | LED_SMD:LED_WS2812B_PLCC4_5.0x5.0mm_P3.2mm | D3 |

AronASzucs/Avalanche32
Handheld ESP32-S3 Geiger counter with a firmware-regulated 400 V boost, SBM-20 tube, USB-C charging and OLED display.

Gabriel-dot-hub/Gabriel_Ortiz_Electiva_2025_C2
Repositorio para las clases de la electiva con el profesor Carlos Antonio Pichardo Viuque


PockyBum522/cad-pcb-projects
Various PCB projects, mostly in KiCad

Diamantenmine/glowbuck
Together with Firefly Luciferin, you can create your own ambilight that connects via USB-C to your computer and draws power from a USB-C PD power supply. Glowbuck is in no way associated with the linked project.



It measures 46 × 89.5 mm and has 4 copper layers, 1.6 mm thick.
54 parts, built around the ESP32-S3-WROOM-1-N8, AP63203WU and WS2812B. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the PrinceYadav78/My-NFC-Reader repository on GitHub, at the commit this page was made from: the board is PCB/My_NFC_Reader.kicad_pcb and its schematic PCB/My_NFC_Reader.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).