Skip to the content
4 layersLayouts, the printed circuit board in 3D

This repository is a library of reusable Atopile hardware packages maintained by PositiveAltitude.

Copper layers
4
Thickness
1.6 mm
Parts
33
Nets
29
Pads
129
Tracks, vias
134, 88
Pours
9
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
2 Apr 2026
Updated
17 Jun 2026

Overview

Layouts is an open-source printed circuit board by PositiveAltitude, from the PositiveAltitude/positive_altitude_ato_packages repository on GitHub, published under the MIT licence. It is a 4-layer board with 33 parts on 29 nets, routed with 134 tracks and 88 vias.

Its parts include 14 capacitors, 13 resistors, 4 transistors, 1 IC and 1 inductor.

README

README.md

PositiveAltitude Atopile Packages

This repository is a library of reusable Atopile hardware packages maintained by PositiveAltitude.

The focus is on practical, ready-to-integrate building blocks for embedded and power electronics designs. Packages in this repository are meant to be reused across projects rather than tied to a single board. The collection currently emphasizes:

  • power-management building blocks
  • battery-management frontends
  • USB-C / USB-PD and power-path circuitry
  • CAN interface parts
  • small embedded support modules

All packages use explicit, LCSC-traceable component selections and are intended to build cleanly as standalone Atopile packages.

Component inventory

See components_list.md for a categorized inventory of all LCSC-traceable parts used by the top-level package default BOMs.

That list intentionally excludes custom footprints and other non-purchasable items that do not appear in package BOM outputs.

Current packages

Embedded

  • packages/embedded/mcu/stm32g0b1kbu6_st
    STM32G0B1KBU6 MCU package with fixed power filtering and boot/reset support passives.

Interface

CAN
  • packages/interface/can/mcp2518fdt_e_sl_microchip
    MCP2518FDT-E/SL 3.3 V SPI-to-CAN-FD controller with local clock and decoupling network.

  • packages/interface/can/tcan3413ddfr_ti
    TCAN3413DDFR 3.3 V CAN FD transceiver with local decoupling and exposed STB control.

Connector
  • packages/interface/connector/raspberry_pi_hat_socket_zhouri
    Raspberry Pi 40-pin HAT socket built around a footprint-compatible 2×20 2.54 mm through-hole female header.

Power

Battery management
  • packages/power/battery_management/bq40z50rsmr_r2_4s_3a_ti
    BQ40Z50-R2-based 4S protected smart-battery frontend for up to 3 A continuous pack current, with internal balancing support, fixed no-thermistor biasing, SMBus telemetry, and BTP interrupt output.
Buck converters
  • packages/power/buck/tps56637rpar_5v1_5a_ti
    Fixed 5.1 V, 5 A buck converter package based on TI TPS56637RPAR, aimed at Raspberry Pi-class loads.

  • packages/power/buck/tps62933drlr_3v3_ti
    Fixed 3.3 V buck converter package based on TI TPS62933DRLR.

Charger
  • packages/power/charger/bq25756rrvr_4s_2a_ti
    BQ25756-based 4S Li-ion buck-boost charger package with 1 A default hardware charge limit, 20 V max input, I2C control, and compact XNRUSEMI dual-MOSFETs.
Power mux
  • packages/power/power_mux/tps2121ruxr_20v_4a_ti
    Minimal generic 20 V-class priority power mux around TI TPS2121RUXR with reverse-current blocking and exported status.
USB Power Delivery
  • packages/power/usb_pd/tps25730drefr_20v_3a_ti
    Autonomous sink-only USB-PD controller block around TI TPS25730DREFR with a 20 V / 3 A target contract, 5 V fallback, and optional exposed digital sideband signals.

Maintainer

PositiveAltitude
dima@positivealtitude.dev

Parts

33
QtyValueFootprintReferences
4Murata_Electronics_GRM155R71H104KE14D:C0402C8, C9, C11, C13
4Texas_Instruments_CSD18543Q3A:VSONP-8_L3.1-W3.1-P0.65-LS3.5-BLQ1, Q2, Q3, Q4
4YAGEO_RC0402FR_0710RL:R0402R4, R5, R7, R8
4PANASONIC_EEHZK1V101XP:CAP-SMD_BD6.3-L6.6-W6.6-FDC2, C3, C4, C5
3YAGEO_RC0402FR_0710KL:R0402R3, R14, R15
2YAGEO_PA1206FRE470R005Z:R1206R1, R6
2YAGEO_RC0402FR_0749K9L:R0402R2, R13
2Murata_Electronics_GRM155R61H474KE11D:C0402C1, C7
2Murata_Electronics_GRM31CR71H475KA12L:C1206C10, C12
1Murata_Electronics_GRM188R61E475KE11D:C0603C15
1Viking_Tech_ARG02BTC2493:R0402R10
1Murata_Electronics_GRM188R61H105KAALD:C0603C16
1YAGEO_RT0402BRD0724K9L:R0402R9
1Texas_Instruments_BQ25756RRVR:TQFN-36_L6.0-W5.0-P0.50-BL-EP-1U1
1TECHFUSE_SL0650_100M:IND-SMD_L7.1-W6.6_SLO0650HL1

More from PositiveAltitude/positive_altitude_ato_packages

11
  • 2 layersLayouts, the printed circuit board in 3D

    Layouts

    PositiveAltitude/positive_altitude_ato_packages

    This repository is a library of reusable Atopile hardware packages maintained by PositiveAltitude.

    26 partsMIT
  • 4 layersLayouts, the printed circuit board in 3D

    Layouts

    PositiveAltitude/positive_altitude_ato_packages

    This repository is a library of reusable Atopile hardware packages maintained by PositiveAltitude.

    14 partsMIT
  • 4 layersLayouts, the printed circuit board in 3D

    Layouts

    PositiveAltitude/positive_altitude_ato_packages

    This repository is a library of reusable Atopile hardware packages maintained by PositiveAltitude.

    12 partsMIT
  • 4 layersLayouts, the printed circuit board in 3D

    Layouts

    PositiveAltitude/positive_altitude_ato_packages

    This repository is a library of reusable Atopile hardware packages maintained by PositiveAltitude.

    11 partsMIT
  • 4 layersLayouts, the printed circuit board in 3D

    Layouts

    PositiveAltitude/positive_altitude_ato_packages

    This repository is a library of reusable Atopile hardware packages maintained by PositiveAltitude.

    10 partsMIT
  • 2 layersLayouts, the printed circuit board in 3D

    Layouts

    PositiveAltitude/positive_altitude_ato_packages

    This repository is a library of reusable Atopile hardware packages maintained by PositiveAltitude.

    6 partsMIT
  • 2 layersLayouts, the printed circuit board in 3D

    Layouts

    PositiveAltitude/positive_altitude_ato_packages

    This repository is a library of reusable Atopile hardware packages maintained by PositiveAltitude.

    6 partsMIT
  • 2 layersLayouts, the printed circuit board in 3D

    Layouts

    PositiveAltitude/positive_altitude_ato_packages

    This repository is a library of reusable Atopile hardware packages maintained by PositiveAltitude.

    5 partsMIT
  • 2 layers56.5 × 65 mmLayouts, the printed circuit board in 3D

    Layouts

    PositiveAltitude/positive_altitude_ato_packages

    This repository is a library of reusable Atopile hardware packages maintained by PositiveAltitude.

    5 partsMIT
  • 2 layersLayouts, the printed circuit board in 3D

    Layouts

    PositiveAltitude/positive_altitude_ato_packages

    This repository is a library of reusable Atopile hardware packages maintained by PositiveAltitude.

    3 partsMIT
  • 2 layersLayouts, the printed circuit board in 3D

    Layouts

    PositiveAltitude/positive_altitude_ato_packages

    This repository is a library of reusable Atopile hardware packages maintained by PositiveAltitude.

    3 partsMIT

Similar boards

  • 4 layers100 × 75 mmTrollerv2, the printed circuit board in 3D

    Trollerv2

    rene-dev/stmbl

    AC Servo Driver for STM32F4

    33 parts990GPL-3.0
  • 4 layers113.3 × 23.5 mmTinyriser, the printed circuit board in 3D

    Tinyriser

    a-little-wifi/Tinyriser

    Cooler/cuter riser for Lenovo 8th/9th gen Tiny5 PCs

    33 parts170CERN-OHL-S-2.0
  • 4 layers180 × 235 mmJLCPCB, the printed circuit board in 3D

    JLCPCB

    Cimos/kicad-druid

    KiCad custom design rules (.kicad_dru) matching JLCPCB and PCBWay manufacturing capabilities

    33 parts49MIT
  • 4 layers99.4 × 34.5 mmA600 ACCEL RAM, the printed circuit board in 3D

    A600 ACCEL RAM

    PR77/A600_ACCEL_RAM

    Amiga 600 Accelerator And RAM Expansion

    33 parts35GPL-3.0
  • 4 layers39 × 40 mmKicad keybridge v2, the printed circuit board in 3D

    Kicad keybridge v2

    abdalrahimnaser/keybridge-pcb

    USB adapter board for Home Assistant

    33 parts28
  • 4 layers131 × 129 mm8x sata backplane, the printed circuit board in 3D

    8x sata backplane

    Hirnschall-Technologies/4x-sata-backplane

    custom backplane for diy nas (4xSATA)

    33 parts27
  • 4 layers100 × 25 mmRf switch sp3t, the printed circuit board in 3D

    Rf switch sp3t

    greatscottgadgets/misc

    miscellaneous Great Scott Gadgets projects

    33 parts21GPL-2.0
  • 4 layers47 × 62.2 mmTTL2ANALOG, the printed circuit board in 3D

    TTL2ANALOG

    hkzlab/TTL-to-RGB

    This board converts CGA/EGA/MDA/Hercules TTL signals into analog RGB signals that can be fed into a compatible monitor

    33 parts20

Questions

What parts does the Layouts use?

33 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Layouts KiCad files?

From the PositiveAltitude/positive_altitude_ato_packages repository on GitHub, at the commit this page was made from: the board is packages/power/charger/bq25756rrvr_4s_2a_ti/layouts/default/default.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Layouts design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).