Skip to the content
2 layers60 × 60 mmPcb power, the printed circuit board in 3D

2-Channel Electronic Volume With Input Selector And Tone Control Boards

Size
60 × 60 mm
Copper layers
2
Thickness
1.6 mm
Parts
30
Nets
9
Pads
83
Tracks, vias
131, 22
Pours
89
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
18 Apr 2020
Updated
18 Apr 2020

Overview

Pcb power is an open-source printed circuit board by PicooLab, from the PicooLab/NJW1194xArduino repository on GitHub, published under the MIT licence. It is a 2-layer board of 60 × 60 mm with 30 parts on 9 nets, routed with 131 tracks and 22 vias.

It is built around the LM317. Its parts include 14 capacitors, 5 diodes, 3 connectors, 2 resistors and 2 ICs.

Main components

1

README

README.md

NJW1194 x Arduino

2-Channel Electronic Volume With Input Selector And Tone Control

Designed with Kicad and Arduino IDE;

Related

Hardware

1. NJW1194 board

NJW1194

Size : 60mmx60mm

2. POWER board

POWER

Size : 60mmx60mm

3. CONTROL board

CONTROL

Size : 36mmx50mm

Software

Arduino nano

not elegant enough yet

Assemble

TBD...

MIT License

Copyright (c) 2020 ATRiiX

Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:

The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software.

THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

Parts

30
QtyValueFootprintReferences
81000uCapacitor_THT:CP_Radial_D10.0mm_P5.00mmC1, C2, C3, C4, C7, C8, C13, C14
4CCapacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolderC5, C6, C11, C12
4DDiode_THT:D_A-405_P7.62mm_HorizontalD2, D3, D4, D5
2100Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalR1, R2
210ufCapacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolderC9, C10
21KPotentiometer_THT:Potentiometer_Bourns_3296W_VerticalRV1, RV2
2Conn_01x03_FemaleConnector_JST:JST_XH_B3B-XH-A_1x03_P2.50mm_VerticalJ2, J3
1Conn_01x03_FemaleConnector_Phoenix_MSTB:PhoenixContact_MSTBVA_2,5_3-G-5,08_1x03_P5.08mm_VerticalJ1
1D_Bridge_+AA-Diode_THT:Diode_Bridge_Vishay_GBLD1
1LM317Package_TO_SOT_THT:TO-220-3_VerticalU1
1LM337Package_TO_SOT_THT:TO-220-3_VerticalU2

The 28 most common of 30 parts.

More from PicooLab/NJW1194xArduino

2
  • 2 layers60 × 60 mm1194pre, the printed circuit board in 3D

    1194pre

    PicooLab/NJW1194xArduino

    2-Channel Electronic Volume With Input Selector And Tone Control Boards

    42 parts7MIT
  • 2 layers50 × 36 mmEncoder 3btn, the printed circuit board in 3D

    Encoder 3btn

    PicooLab/NJW1194xArduino

    2-Channel Electronic Volume With Input Selector And Tone Control Boards

    13 parts7MIT

Similar boards

  • 2 layers70 × 50 mmS88iso, the printed circuit board in 3D

    S88iso

    GBert/railroad

    git clone https://github.com/arendst/Tasmota.git cd Tasmota git tag pio run

    33 parts36
  • 2 layers100 × 35 mmTwo comparator effect, the printed circuit board in 3D

    Two comparator effect

    cyberboy666/two_comparator_effect

    analog video posterisation effect - adapted from a rob schafer design

    34 parts15GPL-3.0
  • 2 layersAlim10o, the printed circuit board in 3D

    Alim10o

    acmo0/PedalBoard-Power-Supply-Diy

    This is a description of pedalboard power supplies that I designed an made. I use this power supplies, they are fully working. Pay attention : they are made for 230VAC.

    110 parts14GPL-3.0
  • 2 layers32 × 42 mmNoahFC, the printed circuit board in 3D

    NoahFC

    zosko/NoahFC

    NoahFC - Atmega328 based Flight Controller

    52 parts12GPL-3.0
  • 2 layers300 × 90 mmPreamp, the printed circuit board in 3D

    Preamp

    profdc9/PrettyGoodPreamplifier

    A Pretty Good Preamplifier for Stereo and Subwoofer Use

    222 parts10
  • 2 layers120 × 50 mmAudioswitch, the printed circuit board in 3D

    Audioswitch

    zehome/autoaudioswitcher

    OSHW: Automatic audio input switcher based on audio activity

    80 parts10BSD-3-Clause
  • 2 layers30 × 128.5 mmKwantizer, the printed circuit board in 3D

    Kwantizer

    benjiaomodular/Kwantizer

    [WIP] An Arduino-based CV quantizer for Eurorack modular synthesizers

    32 parts7
  • 2 layers110 × 92.7 mmYaacwk, the printed circuit board in 3D

    Yaacwk

    federicobriata/iz1glg_yaacw_keyer

    YAACWK, Yet Another Arduino CW Keyer, the cheapest HW stuff compatible with K3ng keyer software ( https://github.com/k3ng/k3ng_cw_keyer ). This project contain Eagle project and library of YAACWK.

    87 parts7CC-BY-SA-4.0

Questions

How big is the Pcb power PCB?

It measures 60 × 60 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Pcb power use?

30 parts, built around the LM317. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Pcb power KiCad files?

From the PicooLab/NJW1194xArduino repository on GitHub, at the commit this page was made from: the board is pcb_power/317337.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Pcb power design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).