Skip to the content
2 layers50 × 36 mmEncoder 3btn, the printed circuit board in 3D

2-Channel Electronic Volume With Input Selector And Tone Control Boards

Size
50 × 36 mm
Copper layers
2
Thickness
1.6 mm
Parts
13
Nets
8
Pads
71
Tracks, vias
49, 35
Pours
2
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
18 Apr 2020
Updated
18 Apr 2020

Overview

Encoder 3btn is an open-source printed circuit board by PicooLab, from the PicooLab/NJW1194xArduino repository on GitHub, published under the MIT licence. It is a 2-layer board of 50 × 36 mm with 13 parts on 8 nets, routed with 49 tracks and 35 vias.

Its parts include 4 switches, 2 capacitors, 2 resistors and 1 connector.

README

README.md

NJW1194 x Arduino

2-Channel Electronic Volume With Input Selector And Tone Control

Designed with Kicad and Arduino IDE;

Related

Hardware

1. NJW1194 board

NJW1194

Size : 60mmx60mm

2. POWER board

POWER

Size : 60mmx60mm

3. CONTROL board

CONTROL

Size : 36mmx50mm

Software

Arduino nano

not elegant enough yet

Assemble

TBD...

MIT License

Copyright (c) 2020 ATRiiX

Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:

The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software.

THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

Parts

13
QtyValueFootprintReferences
4MountingHole_3mm_Pad_ViaMountingHole:MountingHole_3mm_Pad_ViaREF1, REF2, REF3, REF4
3SW_PushButton_Switch_THT:SW_PUSH_6mm_H13mmSW1, SW2, SW3
2100nFCapacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolderC1, C2
2RResistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolderR1, R2
1Conn_01x08_MaleConnector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_HorizontalJ1
1Rotary_Encoder_Switchatrix_encoder:RotaryEncoder_Alps_EC11E-Switch_Vertical_H20mmSW4

More from PicooLab/NJW1194xArduino

2
  • 2 layers60 × 60 mm1194pre, the printed circuit board in 3D

    1194pre

    PicooLab/NJW1194xArduino

    2-Channel Electronic Volume With Input Selector And Tone Control Boards

    42 parts7MIT
  • 2 layers60 × 60 mmPcb power, the printed circuit board in 3D

    Pcb power

    PicooLab/NJW1194xArduino

    2-Channel Electronic Volume With Input Selector And Tone Control Boards

    30 parts7MIT

Similar boards

  • 2 layers40 × 20 mmUsb uart, the printed circuit board in 3D

    Usb uart

    earthtojake/text-to-cad

    Design physical products with AI

    13 parts26kMIT
  • 2 layers35 × 29 mmMagSpoofTC, the printed circuit board in 3D

    MagSpoofTC

    samyk/magspoof

    A portable device that can spoof/emulate any magnetic stripe, credit card or hotel card "wirelessly", even on standard magstripe (non-NFC/RFID) readers.

    13 parts4.2k
  • 2 layers20.6 × 23.6 mmAO-03 signal amplifier, the printed circuit board in 3D

    AO-03 signal amplifier

    fossasia/pslab-scripts

    Pocket Science Lab - Scripts for Sensor Experiments

    13 parts1.6kApache-2.0
  • 2 layers47 × 35.6 mmMX7-C-35PL C11, the printed circuit board in 3D

    MX7-C-35PL C11

    rusefi/rusefi

    rusefi - GPL internal combustion engine control unit

    13 parts1.2k
  • 2 layers95 × 95 mmCube batteryboard, the printed circuit board in 3D

    Cube batteryboard

    willem-pennings/balancing-cube

    A cube that balances itself in a corner or edge using reaction wheels

    13 parts1.1kGPL-3.0
  • 2 layers15.2 × 20.3 mmPt100stick, the printed circuit board in 3D

    Pt100stick

    VoronDesign/Voron-Hardware

    Cool Hardware designed by the Voron Design group

    13 parts1.1kGPL-3.0
  • 2 layers53.9 × 23.2 mmBuffer, the printed circuit board in 3D

    Buffer

    hoglet67/RGBtoHDMI

    Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

    13 parts1kGPL-3.0

Questions

How big is the Encoder 3btn PCB?

It measures 50 × 36 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Encoder 3btn use?

13 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Encoder 3btn KiCad files?

From the PicooLab/NJW1194xArduino repository on GitHub, at the commit this page was made from: the board is pcb_controller/encoder_3btn.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Encoder 3btn design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).