

Self Balancing robot
Self Balancing Robot KiCAD files
- Size
- 90 × 60 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 16
- Nets
- 62
- Pads
- 111
- Tracks, vias
- 175, 0
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 26 Aug 2026
- Updated
- 29 Aug 2026
Overview
Self Balancing robot is an open-source printed circuit board by Pi-is-314, from the Pi-is-314/Self-Balancing-Robot-KiCAD-Files repository on GitHub. It is a 2-layer board of 90 × 60 mm with 16 parts on 62 nets, routed with 175 tracks and 0 vias.
It is built around the TB002-500-02BE and TB002-500-03BE. Its parts include 5 connectors, 2 capacitors and 1 resistor. It belongs with the robots and motor control boards and the ESP32 boards of this library.
Main components
2Parts
16| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | C | Capacitor_THT:CP_Radial_D10.0mm_P5.00mm | C1, C2 |
| 2 | Pololu_Breakout_A4988 | Module:Pololu_Breakout-16_15.2x20.3mm | A4988, A4988 |
| 2 | SSK01-MPH-254-A4 | 4 pin male header:SAMESKY_SSK01-MPH-254-A4 | J7, J8 |
| 2 | ~ | Max7219:Max7219 Footprint | J3, Max7219 |
| 1 | ESP32-DEVKIT-V1 | ESP32_DEVKIT_V1_Files:MODULE_ESP32_DEVKIT_V1 | ESP |
| 1 | MPU6050 | MPU 6050:MODULE_GY-521 | MPU 6050 |
| 1 | R | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P15.24mm_Horizontal | R1 |
| 1 | TB002-500-02BE | 2 Ct. Terminal Block files:CUI_TB002-500-02BE | Tblock2 |
| 1 | TB002-500-03BE | 3 Ct. Terminal Block FIles:CUI_TB002-500-03BE | TBlock3 |
| 1 | ~ | 5 V Buck Converter:5V buck converter | J6 |
| 1 | ~ | 5 pin male header:5 pin male header | Max7219 |
| 1 | ~ | 5A Fuse:5A Fuse | Fuse |
Similar boards
- 2 layers160 × 160 mm

- 4 layers77.1 × 39.9 mm

LEL Detector
citrineio/LEL-Detector
This project takes inspiration from my current job as a control and instrumentation engineer in the oil and gas industry.
77 parts11 - 6 layers62 × 77 mm

Black Body Temperature Sensor PCB
DylanLockyer/Black_Body
Electrical system for black body MKID tester
217 parts1MIT - 4 layers50 × 75 mm

OneroiV1
HomeOnDuna/Nyx-Flight-Computers
Contains the Nyx flight computer family developed for UNSW Rocketry Avionics team.
166 parts1 - 2 layers174.2 × 124 mm

- 2 layers31.6 × 33.5 mm

AC to DC Converter Circuit
LordEbisu/AC-to-DC-Converter-Circuit
Simple AC to DC converter using bridge rectifier and capacitors.
12 parts1 - 2 layers69.6 × 51.3 mm

- 2 layers33.5 × 37 mm

SumpPump
aidanogr/SumpPumpActivityMonitorPCB
Transforms 7.7Vrms transformed signal from sump pump and converts it to 3VAC to be read by GPIO
9 partsGPL-3.0
Questions
How big is the Self Balancing robot PCB?
It measures 90 × 60 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Self Balancing robot use?
16 parts, built around the TB002-500-02BE and TB002-500-03BE. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Self Balancing robot KiCad files?
From the Pi-is-314/Self-Balancing-Robot-KiCAD-Files repository on GitHub, at the commit this page was made from: the board is Self Balancing robot/Self Balancing robot.kicad_pcb and its schematic Self Balancing robot/Self Balancing robot.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Self Balancing robot design in my own project?
Its repository states no licence, so its author keeps all rights: ask Pi-is-314 before reusing the design.